Heating solutions - Import export

Black oxidation treatment is a commonly used chemical surface treatment method for metal parts, including steel, stainless steel, copper and brass. The principle of this process is to immerse the metal in a heated solution containing oxidized salt, so that the metal surface forms a black oxide film to achieve the purpose of rust and corrosion resistance. This oxide film is usually iron tetraoxide (Fe304), which not only improves the corrosion resistance of the metal, but also gives it a black appearance. This surface treatment is widely used in areas such as precision machining projects, automotive parts, tools and decorations, and the advantages of black oxide include better corrosion protection, reduced light reflection, dimensional stability and aesthetic appeal. In short, the black oxidation treatment is a versatile technology suitable for the improvement and protection of various metal parts.

Preheating of forging tools Preheating of tubes before welding Preheating before thermal spraying Preheating of moulds

A smart and eco-friendly heating solution for your home. Discover our range of advanced heat pump solutions designed to meet your specific need. Works seamlessly with PV systems to harness solar energy for even greater efficiency with R290 technology Swimming Pool Heat Pump Heating & Cooling Heat Pump including Domestic Heat Pump Water Heater Commercial Heat Pump Water Heater

Finned Tubular Heaters are the ideal solution for air or gas flow heating processes. The ribs enlarge the heat-releasing surface significantly. Basis of the finned tubular heaters are our 8.5 mm tubular heaters. The outer diameter of the fins is 28 mm. The elements can be delivered straight, U-shaped or circular (special design on request). Tubular heater as well as fins are made of stainless steel, the standard for the tube is 1.4828 (other materials possible as in chapter Round Tubular Heaters), the fins are normally made of 1.4301 (1.4571 on request).

The UniSystem range of heat-exchange equipment is designed to offer one-stop complete solutions in efficient heat transfer situations. The UniSystem WRG is leading technology, offering major savings, preventing energy being literally poured down the drain, released into the atmosphere or pushed out of a chimney - both environmentally and financially. Each system is individually designed as required. No two situations are identical, the demands of process as well as limitations of space vary from system to system, even within the same plant the UNEX expertise ensures the correct results for you. Many customers of UniSystem return for complete plant heat concepts and solutions.

When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas!

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Heating bands are the ideal solution for the heating of tubes an cylinders. Mica band heaters, frequently used as nozzle heaters, are made with a plastic-tight stainless steel casing. Such mica heating bands are in many dimension available from stock. The Ceramic heating band type is suitable specially for applications with high watt density and therefore for higher temperatures. Ceramic band heaters, also known as ceramic ring heaters or cylindrical ceramic sectional heaters, are attached to the contact surface by means of a clamping mechanism. A preferred field of use for ceramic band heaters is the heating of plasticising cylinders, bushings and nozzles of injection moulding machines and screw barrels of extrusion machines. For thermal optimization and process control ceramic band heaters can also be offered with insulation jackets or air cooling.

For both onshore and offshore applications we develop technical heating solutions for the thermal treatment of gaseous and liquid media as well as for solids of all kinds.

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

The Freek heat transfer nozzle heater type especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our patent pending Freek heat transfer alternative is brass, with or without coating, basically with a slit. Characteristics of our HotMicroCoil nozzle heaters sheathed by a reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the heater allows a very good heat transmission to the nozzle. In all our HotMicroCoils with reflection tube the assembly of a thermocouple is possible and recommended for bigger diameters and power. Also most common nozzle heater solutions are HotMicrocoil heating elements with clamp bands with diverse locking mechanisms.

Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.

Electrical flange type immersion heaters The range of immersion heaters type FHK offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

Flameproof unit air heater ATEX EEx d IIC T3 ATEX The „FUH“ range of flameproof electrical unit air heaters offer a hazardous area, space heating solution, for large premises requiring high heating capacity. They are certified for zone 1 or 2 areas, where the flammable atmosphere is a group IIA, IIB or IIC gas. This heater has an internal fan.

ELECTRIC HEATER FAN TDS 29 EWarm. Warmer. Hot! Ideal mobile heating solution. The mobile heater TDS 29 E is an ideal heating solution that can be applied basically everywhere. Equipped with a hard-wearing housing and a convenient carrying handle, the robust device impresses when heating construction trailers, workshops, warehouses, halls and boathouses. Via the integrated thermostat control, the warm air flow of the TDS 29 E can be infinitely and precisely adjusted to the desired temperature. The two-stage power control for needs-based adjustment of the heat output allows for perfect temperature control of every room. Beyond that, fan operation without heating function is also possible. Like all devices of that series, the TDS 29 E produces non-condensing heat without consuming oxygen or producing combustion gases – this makes it particularly suitable for indoor use. For here, the use of oil and gas heating devices is often undesirable or even prohibited.

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

In linguistic usage occasionally the terms coil heaters, nozzle heating elements, hot runner heating elements, cable nozzle heaters are used. Our HotMicroCoil heating elements can be used in a wide variety of applications. Their high level of plasticity ideally suits them to the heating of hot runner nozzles and for accurately heating the contours of three-dimensional surfaces. Many of our customers order HotMicroCoil elements in their unformed state of mineral insualted cable heaters and perform the subsequent shaping work themselves, while others commission us to shape and fit the heating cable elements. A large number of ready-to-fit heating solutions are available for plastic injection nozzles with clamping mechanisms, housing bezel, reflection tube or heat conduction sleeve.

ELECTRICAL SPACE HEATER TDS 75 RProfessional heating for a wide range of applications: With the electric heating gun TDS 75 R Not only because of the round warm air outlet on-site direct heating applications run smoothly with the electrical space heater TDS 75 R. The combination of sound, straightforward heating engineering by means of corrosion-protected stainless steel heating elements for reliable, fault-free continuous heating operation as well as easy handling via infinitely variable thermostat and triply switchable heating capacity control offers you the most diverse applications. a budget-friendly heating solution without corners and edges – housed in a fully galvanized, painted steel housing with ergonomic handle.

CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

Flameproof immersion heaters ATEX II 2 G/D EEx d IIC IECEx Exd IIC T1 – T6 Ex tD A21 IP66 T…°C The EXHEAT “FP-C” range of flameproof core immersion heaters offers a hazardous area heating solution for oil and similar applications where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust EEx d terminal cover protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

EEx’e‘ certified immersion heater EEx e T1 – T6 ATEX The “FHK-Exe” type electric immersion heaters are EExe certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The range of immersion heaters type FHK-Exe offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust Ex’e’ terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

Immersion heater with cores The range of core immersion heaters type FHK-P offers a heating solution for liquid media where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of core elements fitted into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 The Exheat „RFA-C” range of flameproof removable core heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust EEx d terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.

Core Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 ATEX IECEx zertifiziert The EXHEAT® ‘FP-C’ Range of flameproof core immersion heaters offers a Hazardous Area heating solution for oil and similar applications where a low heat density is required. The special element/sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The number of element cores fitted depends upon the media to be heated and the kilowatt rating required.

CSN® screwin heating units are particularly suitable for the direct heating of liquids, air and gases. In relation to the process, we provide you with screwin or tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. The surface loadings, a very critical design feature for the longterm durability of the elements, are calculated for their specific application. For exact temperature monitoring, the screwin heating units can be manufactured with various controllers and / or limiters, as well as PT100 sensors or sheath thermocouples. Our team also looks forward to standing by your side if you need heating solutions which cannot be covered with socalled standard solutions. We are happy to develop processcustomised solutions in close consultation with you. We look forward to your task.

The CSN® tubular heating elements are of versatile application and have a long life span, if appropriately used. The tubular heating elements serve for the calefaction of gases, liquids and solid matters. The configuration of the elements is jointly decisive for the effectiveness. CSN ® tubular heating elements are available as round heating elements in diameters of 6.5 / 8.5 / 11.5 and 16 mm. These elements provide different materials, countless shapes and lengths up to 7 m, the optimal solution for your application. Our team also looks forward to standing by your side if you need heating solutions which cannot be covered with socalled standard solutions. We are happy to develop processcustomised solutions in close consultation with you. Nowadays, amongst others, our high quality standards are documented via the „GisoVerschlusstechnik“ (Giso locking technology), with which we specify the isulation resistance values

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

'Findme' - Clever and Accurate of Smart Location Tracker An intelligent location tracking device that sends and receives GPS locations using the LPWAN network. It can be used for various purposes, from vehicle or motorcycle location control to check the location of children and dementia patients. Also, it provides living safety services through emergency notification (SOS) functions. Product Specification Product Name: Findme Model Name: WAYBLE-FM100 Size: W 85mm x D 55mm x H 21mm Weight: 67g Input Power: Lithium Polymer 1300mAh 3.7v Frequency Band: LTE Cat.M1 B5 Charging terminal: Micro USB-C Type Usage time: About 2 days when fully charged (depending on charging and usage environment) Manufacturer and Country: DAEHO I&T Co., Ltd. / Republic of Korea Our Company Daeho I&T Co., Ltd. is a company specializing in ICT and nano SiC fiber heating technology that provides building central control solutions, IoT smart solutions, and nano SiC fiber heating solutions.