Heating and cooling systems- - Import export

Because of the complexity of controlling both parameters, every project is designed according to dimensions, material of the case, target values as well as ambient extremes in temperature and humidity. Although we do not have standard, off shelf units we are offering: Maxi T – Large units to control temperature and humidity inside the medium size cases (5-10 cubic meters) where main generator is located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible

The KASAG sterile containers, mixing tanks are used for preparing and mixing of products in the food industry. The container is equipped with a mixing device and jacket for heating and cooling. The entire system is built on a frame with a control unit and weighing cells.

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

The wastewater in the sewers is an ideal source of energy when combined with heat pumps and cooling machines, for heating and cooling of buildings. Per our experience, the minimal requirements for such a plant include: a wastewater flow of approx.. 10 l/s a wastewater temperature level of about 10°C a power requirement from 100kW (for heating and cooling from ca. 50kW). During the course of conveying wastewater to the sewage treatment plant, there are many possibilities for exploiting thermal energy. Wastewater can also be used many times over consecutively as energy source. Despite new inflows, or the confluence into larger canals, but also through heat influx from cooling systems, the change in temperature of the wastewater is mostly marginal. Innovative cities have ready energy guidelines (energy plans), based on which you can orient yourself to find out whether there is a suitable wastewater canal in your near vicinity (maximally approx. at a distance of 200 m).

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil, emulsion and water Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium liquids of the chemical industry Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium oil, emulsion and water Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium liquids of the chemical industry Filter material non-woven fabric

Sealant and lubricant for cold and hot-water valves in plumbing and heating sector, in vehicle heating systems or cooling circuits, ground seals on glass taps and desiccators For lubricating O-rings and rubber seals during assembly and operation, as well as plastic parts of all kinds Advantages and benefits Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Consistent properties without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol

Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free

Antifreeze for motorcycles and scooters Description Castrol Motorcycle Coolant is a ready-to-use, premixed antifreeze based on ethylene glycol. It ensures frost protection down to -25 °C and should be changed every 2 years or according to the manufacturer's instructions. Suitable for all aluminum engines. Caution: Not suitable for use in magnesium alloy engines. Advantages - Optimal corrosion protection in the cooling system, thereby extending engine life - Excellent cooling and heat transfer properties - Protection of all cooling system components - Compatible with motorcycle paintwork - Offers frost protection down to -25° Celsius Specifications Based on coolant concentrate conforming to: ASTM D3306 (I) BS 6580:2010

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate , and contains neither CMR substances (Cancerogenic Mutagenic

In heating mode 1, it has a capacity of 15.88kW and an efficiency of COP 4.36 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 14.98kW and COP 3.38 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 12kW and an efficiency of EER 2.56 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 148 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 38.01kW and an efficiency of COP 4.32 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 36.33kW and an efficiency of COP 3.38 at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 26.75kW and an efficiency of EER 2.50 at 7°C water output in 35°C outdoor air. Capacity 46kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1030/953/1003 Total Weight (kg): 310 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 31.67kW and an efficiency of COP 4.28 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 30.04kW and COP 3.32 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 22.39kW and an efficiency of EER 2.49 at an outdoor air temperature of 35°C and a water output of 7°C. Capacity 39kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1030/953/1003 Total Weight (kg): 270 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 21.93kW and an efficiency of COP 4.30 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 20.44kW and an efficiency of COP 3.35 at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 15.53kW and an efficiency of EER 2.56 at 7°C water output at 35°C outdoor air. Capacity 26kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 927/803/1003 Total Weight (kg): 210 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems,. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 16.20kW and an efficiency of COP 4.31 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 15.33kW and COP 3.41 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 12.15kW and an efficiency of EER 2.73 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump External Compressor: Copeland Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 148 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 12.92kW and an efficiency of COP 4.34 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 12.56kW and COP 3.43 efficiency at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 9.57kW and an efficiency of EER 2.77 at 7°C water output in 35°C outdoor air. Capacity 12kW Circulation Pump External Compressor: Copeland Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 138 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 12.60kW and an efficiency of COP 4.31 at a hot water output of 35°C in 7°C outdoor air. In heating mode 2, it has a capacity of 12.20kW and an efficiency of COP 3.36 at 45°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 9.35kW and an efficiency of EER 2.55 at 7°C water output in 35°C outdoor air. Capacity 12kW Circulation Pump External Compressor: Panasonic Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380-420V Refrigerant: R407C Product Dimensions W/D/Y: 1360/500/1160 Total Weight (kg): 138 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 13.6-39.8kW and COP 4.62 efficiency in 7°C outdoor air and 35°C hot water output. In cooling mode, it has a capacity of 12.1-31.3kW and an efficiency of EER 3.23 at 7°C water output in 35°C outdoor air. Capacity 40kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Heating-Cooling-Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1210/1090/1400 Total Weight (kg): 400 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 7.2-21.8kW and COP 4.61 efficiency in 7°C outdoor air and 35°C hot water output. In cooling mode, it has a capacity of 6.4-16.7kW and an efficiency of EER 3.24 at 7°C water output in 35°C outdoor air. Capacity 22kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1200/540/1750 Total Weight (kg): 210 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 24.3-60.8kW and COP 4.64 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 13.4-47.1kW and an efficiency of EER 3.26 at 7°C water output in 35°C outdoor air. Capacity 65kW Circulation Pump External Compressor: Mitsubishi DC Scroll Operating Modes: Cooling, Heating, Hot Water Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 1210/1090/1400 Total Weight (kg): 405 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 5.4-15.63kW and COP 4.72 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 4.6-11.8kW and an efficiency of EER 3.23 at 7°C water output in 35°C outdoor air. Capacity 16kW Circulation Pump Built-in Compressor: Panasonic-Sanyo Operating Modes: Cooling, Heating, Hot Water Power Supply: 220V Refrigerant: R32 Product Dimensions W/D/Y: 1215/500/830 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode, it has a capacity of 4.18-12.1kW and COP 4.68 efficiency at 35°C hot water output in 7°C outdoor air. In cooling mode, it has a capacity of 3.74-9.6kW and an efficiency of EER 3.19 at 7°C water output in 35°C outdoor air. Capacity 12kW Circulation Pump Built-in Compressor: Panasonic-Sanyo Operating Modes: Cooling, Heating, Hot Water Power Supply: 220V Refrigerant: R32 Product Dimensions W/D/Y: 1215/500/830 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

Purity and Quality Control: High purity refrigerant gases are manufactured and stored under stringent quality control measures, ensuring that the gas is free from impurities, contaminants, or unwanted byproducts. This purity is essential for the optimal performance and efficiency of refrigeration systems.2. Efficient Heat Transfer High purity refrigerart gases facilitate efficient heat transfer in cooling systems. Impurities and contaminants can hinder heat transfer, leading to reduced system efficiency and increased energy consumption.3. Environmental Compliance: Many high purity refrigerant gases comply with environmental regulations, especially those related to ozone layer protection and glooal warming potential. They are designed to have minimal or no impact on the environment, making them environmental^ friendly choices.Energy Efficiency: Using high purity refrigerants contrioutes to the overall energy

miromatic – The modular process technology offers individual solutions for optimising system and process performance with the objective of increasing the efficiency of the production line, preserving productivity and reducing the environmental burden. The process technology division also plans, designs and manufactures the following process engineering solutions in the foodstuffs industry: Customer-specific valve clusters Sterile air modules Pressure vessel construction per the pressure equipment directive Cooling and heating systems Continuous mixing devices (KME) Scraping heat exchangers (SWT) Thermal product treatment Servicing / system overhauls

Galvanized Coated Steel Sheets are products obtained by subjecting hot or cold rolled sheets to zinc coating process, the surface of which is brightened and strengthened against corrosion. It is offered in various grades such as DX51, DX52, DX53, DX54, DX56, S220GD, S280GD, S320GD, S350GD, HX260LAD, HX300LAD, HX340LAD. Application Areas and Advantages: Wide usage in sectors such as automotive, white goods, machinery manufacturing, construction sector, industrial warehouse solutions, cooling heating systems, transportation systems. Zinc coating increases corrosion resistance and makes the product more durable. The amount of coating varies according to demand and place of use. Galvanized Coated Steel Sheet, which is coated with zinc by dipping or electrolytic coating method to increase the corrosion resistance of the steel sheet, is usually coated with a total of 100-300 gr / square meter on both surfaces.

Floor heating systems