Heat strips - Import export

Standard: AISI, ASTM, GB Place of Origin: China Technique: Cold Rolled/hot rolled Surface Treatment: Polished Application: Construction, Construction and hardware Thickness: 0.25mm-25mm Width: 16-1500mm Length: Customers' Requirement Certificate: ISO9001/SGS/BV Type: Steel coil Edge: Round Surface: Black Supply Ability: 5000 Ton/Tons per Month Hardened and tempered heat treatment steel strip for construction Packaging Details: standard sea worthy package  Payment Term: T/T,L/C etc. Port of shipment: Xiamen,China

Prevent leaks, improve product life and provide tamper evidence for both your and your customer's peace of mind. Increase consumer confidence and promote their return to your business. Applied over the cap or product's point of entry, with a visible tear strip, and heat sealed to provide a neat and close fit. A perfect solution for items such as cosmetics, skin creams and bottles. These services can be applied in bulk or on a pay-as-you-go basis before being shipped using our fulfilment solutions.

Maximum heat dissipation using PC board heat sinks in minimal board space. Seifert electronic GmbH offers custom heat sinks for use in the board area – precisely measured and flexibly adapted to your requirements. The wide standard range of Seifert electronic includes PC heat sinks in all common designs. We provide various heat sink models such as snap-on heat sinks made of strip material, extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

SS 430 is a corrosion and heat resistant ferritic Chromium Steel. It can be polished to appear similar to Chromium plate. The material is magnetic in both annealed and cold rolled tempers. The alloy can be readily blanked and formed. The material can be resistance welded, brazed, and soldered. SS 430 is resistant to atmospheric corrosion and fresh water, but it not resistant to most salts and sea water. It is resistant to scaling by oxidation up to about 1400°F. Available Sizes: SS 430 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM A240, FED QQS 766, and UNS S43000.

HPM® 455 is a precipitation heat treatable martensitic Stainless Steel. The composition provides a good combination of corrosion resistance and heat treated strength favorable for fatigue applications. The material is well suited for demanding spring devices The alloy has reasonably good forming characteristics in the annealed temper considering that it has a hardness of RC30. A significant radius is useful when bending is necessary in a fabrication. Cold working prior to the precipitation hardening treatment can drive finish strength up to 270,000 PSI (0.2% offset yield strength). The alloy retains a good strength through 800°F (Approx. 70% of room temperature). Resistance to stress – corrosion cracking is optimized by heat treating at 950°F. The overall corrosion resistant to normal atmospheric is equal to SS 430 with no staining. The alloy can be welded by resistance and inert gas shielded techniques. It also is suitable for brazing using a flux when possible.

SS 436 is a corrosion and heat resistant ferritic Chromium Steel. It can be polished to appear similar to Chromium plate. The material is magnetic in both annealed and cold rolled tempers. This grade of ferritic stainless steel has shown a greater resistance to ridging or roping defects as compared to type 430 stainless steel. The alloy can be readily blanked and formed. The material can be resistance welded, brazed, and soldered. SS 436 is resistant to atmospheric corrosion and fresh water, but it not resistant to most salts and seawater. It is resistant to scaling by oxidation up to about 1400°F. Available Sizes: SS 436 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 15.0” (381 mm). The material conforms to ASTM A240 and UNS S43600.

Based on the known Diamond ZEUS D50 Fusion splicer, which provides fast, easy, and high performance field terminations of Splice-On Connectors (SOC), we have developed a new Kit with the aim of simplifying the field repair or termination of outdoor connectors. The Kit contains everything that is needed to prepare, handle and splice tough outdoor/military and industrial cables with an outer diameter of 3 mm to 8 mm, including a cleaver and an automated stripping machine with heated jaws. Once the cable is fixed on a sliding holder, all three operations can be carried out without additional cable manipulation.

The preparation of tapes before lamination is often an important step in terms productivity. The new GCM works directly from overlays coils thickness from 0.04 to 0.4 mm with or without magnetic tape. Depending on the machine configuration, the hourly rate reaches 1200 format welded, cut to length and stacked. Benefits Fully automatic suction cup brings a destacker hearts in the process, capacity of 1000 sheets 0.7 mm thick. Cleaning sheets before being fed into the machine, each sheet passes PVC or PET in a special cleaning roller. You do not have to worry about the cleanliness of the cards before lamination. High technology, high precision alignment and positioning hearts compared with magnetic tapes. Depending on the heat size, the magnetic strip can be positioned much higher than the overlay on the bottom. In the assembly process, a special ultrasonic welding of two or three layers fixed with accuracy.

The preparation of tapes before lamination is often an important step in terms productivity. The new GCM works directly from overlays coils thickness from 0.04 to 0.4 mm with or without magnetic tape. Depending on the machine configuration, the hourly rate reaches 1200 format welded, cut to length and stacked. BENEFITS Fully automatic suction cup brings a destacker hearts in the process, capacity of 1000 sheets 0.7 mm thick. Cleaning sheets before being fed into the machine, each sheet passes PVC or PET in a special cleaning roller. You do not have to worry about the cleanliness of the cards before lamination. High technology, high precision alignment and positioning hearts compared with magnetic tapes. Depending on the heat size, the magnetic strip can be positioned much higher than the overlay on the bottom. In the assembly process, a special ultrasonic welding of two or three layers fixed with accuracy. High efficiency

Aluminum metal ceiling is a ceiling partition decoration material that facilitates air circulation, exhaust and heat dissipation. Aluminum strip ceiling system is extruded through mold. And due to the characteristics of aluminum, it is not easy to deform and fade. The installation structure is simple. Screws and special parts connect the upper key keel and the segmented hammer.Aluminum baffle ceiling systems come in a variety of styles. It has a strong visual impact. Aluminum profiles can choose different heights and spacings, one high and one low, one sparse and one dense, and the color matching are reasonable, making the design ever-changing.Adjustable vision height, and can conceal all pipe and other facilities , and also can be make sunlight or lamplight soft uniform It has open vision , ventilation , breathable , lively and tidy line , distinct, reflected contracted modern style , simple and convenient operation , become main products in popular decoration market.

Anti-corrosion flexible one-sided self-adhesive butyl sealing strip, made of highly elastic, synthetic rubber (butyl) of soft rubber-like texture. It adheres reliably without heating. The butyl sealing strip is driven apart by the contact pressure, but due to its elasticity and plastic properties it penetrates into the smallest joints and unevenness and thus provides an optimum sealing. It can be drawn out to wafer-thin films by hand. Even high contact pressure level is not able to destroy the film. Non-ageing, UV-resistant, watertight, non-shrink, tight towards water vapour, seawater resistant. A sealant between metal, wood, plastics, organic glass and silicate glass with and among each other. It seals rivet and screw joints, flanged and folded connections. Sealing between metals prevents galvanic /electrolytical corrosion. Does not corrode Plexiglas, metal, wood, oil- and synthetic resin paints and does not contain any corroding ingredients.