Heat meter - Import export

Thorne & Derrick International, based in the UK, are leading Specialist Distributors of Metering products for commercial, industrial and hazardous area applications – we supply meters for water, gas and heat (thermal energy) metering from leading manufacturers in a range of technologies including Ultrasonic, Clamp-on, Diaphragm, Rotary, Turbine, Electromagnetic (Magmeter) and Woltmann. We provide excellent customer service from our trained sales engineers specialising in recommending the optimum meter to ensure the highest accuracy and reliability of measurement – we can recommend meters to ensure compliance with approval and regulatory schemes including RHI, MID and WRAS and also specify metering products to achieve BREEAM credits for sustainable buildings.

TTR 250 Ex stainless steel desiccant dehumidifiers For use in Ex-proof zones ... The TTR 250 Ex complies with the ATEX Products Directive 2014/34/EU and was specially developed for dehumidification in hazardous areas (non-conductive dusts). Ex protection: ATEX zone 22 (Ex II 3D Ex c T240 °C) With the TTR 250 Ex you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany. The standard operating hours counter of the TTR 250 Ex is optionally also available as a dual counter for the additional MID-compliant registration of the power consumption. A few practical benefits: * - Robust high-quality dehumidifier “made in Germany” * - Corrosion-resistant stainless steel housing * - Integrated heat recovery * - Self-regulating PTC heating * - Ampere meter to control the operating condition * - Operating hours counter

Silicon Nitride Ceramic Balls are widely used on bearings with extreme performance requirements, such as: High-speed bearings, high precision bearings, vacuum bearing, high / low-temperature bearing, non-magnetic bearing, high precision ball screw; it is also used as valve ball, measuring ball for the chemical pump, heat pumps, metering pumps. Its excellent properties including: Good corrosion resistance withstands attacks from harsh chemicals and environments. High-Temperature Hardness is twice that of steel, Silicon nitride ceramic balls retain their strength and hardness up to 1800 degrees F.Lightweight, silicon nitride ceramic balls’ density is 3.20g/cm3 and weighs 45% less than steel which reduces centrifugal force, skidding and wear under high speed and acceleration, so greatly extending the service life. Superior Surface Finish is conducive to improving working speed and reach higher accuracy.

Residence (Domestic) Ultrasonic Heat Meters / 0-350°C Rotatable head and easy to read data / LCD display with light / Strong Plastic materials body / DN15 ~ DN40 dimensions / Support CJ188 communication protocol / Support optica, RS485 and M-Bus interface / Hermetically sealed register (IP67) / Instalation Horizontal or Vertical / Temperature 4 ~ 150°C / 3,6V lithium, Min 6 years battery life / 2 years of warranty ** Certifacates: •2014/32/EU - MID MI-001 Water Meter •EU Type Examination Certificate •Module D- EU Verification Certificate •ISO 4064:2015 / EN14154-1:2005, OIML R 49:2006 •ISO 9001:2015 / ISO 14001:2015 *** For the variety of implementation conditions appropriate threaded connection (heat meter fittings) which is given with heat meters as a set.

*Vital Monitor *SeaMed Aquarius Vital Monitor *Vital Monitors *8 " Color Touch Tft Lcd Display *Ability to monitor ECG, Sp02, PR, Nibp, respiratory and skin temperature parameters *Possibility Of Using Infrared Forehead Heat Meter *Neonatal / Pediatric / Adult Modes Of Use *Printer Feature *Coffee Table With Wheels And Basket *Ability to transfer wired or wireless data *Barcode Reader *Ability To Connect To Hbys With Hl7 Infrastructure

EUROLINIA infrared industrial tunnel ovens are designed to rapidly and uniformly heat the surface of cables, wires, polymer pipes and tubes, dry fiber optics and etc. in batch or continuous conveyor production using targeted high-intensity infrared radiation. High efficiency is achieved by concentrating high-intensity infrared radiation and by using a circular reflector that efficiently distributes radiant energy inside the heating chamber. Additional efficiency is gained by installing three-level thermal protection. EUROLINIA tunnels have modular structure: one heating section is 2 meters long, you can connect up to 8 sections in one production line. Maxumum temperarature in the tunnel can reach up to 700C. Tunnels can have multiple separate heating zones and can be equiped with a conveyor. To ensure high-quality, high-precision surface heating, industrial tunnel ovens are also equipped with an automatic heating control system (APCS).

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

Indenting text and meter marks in cable insulation within the extrusion line after the cooling bath, or in a se­parate winding system (indenting cold material). Text and meter marking Electrically heated marking wheel for indenting cold material Within the extrusion line after the cooling bath, or in a separate winding system Speeds up to 100 m / minuteOne marking wheel 1 m in circumference with built-in 4-digit meter counter and 300-mm type segment supports for installing engraved type segments. With robust pillar stand, pneumatic support for the marking wheel allowing easy open and close function, and guiding rollers for a diameter range of 10-250 mm (or 6-80 mm without price change). Marking head and guiding rollers separately adjustable in height by rack-jack devices. With heating system. Counter: raised type for clear indented lettering, standard number size: 3.5 mm, manual reset lever. FEATURES Electrically heated marking wheel for indenting cold material.

The VersaMeter™ is designed to fit direction into a pipeline assembly and can provide either local or remote display options. The VersaMeter™ represents a full range of precision flow measurement instruments and accessories utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in...

The FurnaceMeter™ is available for either gas or liquid flow measurement. These meters can also be fitted with integrated manual flow control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control for most applications. The FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The FurnaceMeter™...

The VersaMeter™ is designed to fit direction into a pipeline assembly and can provide either local or remote display options. The VersaMeter™ represents a full range of precision flow measurement instruments and accessories utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in many sizes and is designed to fit directly into equipment piping. The VersaMeter™valve assemblies fit standard pipe fittings to better integrate into...

The FurnaceMeter™ is available for either gas or liquid flow measurement. These meters can also be fitted with integrated manual flow control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control for most applications. The FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The FurnaceMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every FurnaceMeter™ comes complete with a 10point...

The VersaMeter™ is designed to fit direction into a pipeline assembly and can provide either local or remote display options. The VersaMeter™ represents a full range of precision flow measurement instruments and accessories utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in...

The Liquid FurnaceMeter™ is available for liquid flow measurement. These meters are fitted with integrated motorized flow control valves specifically designed for the liquid type, inlet pressures, and scale ranges to provide precision process control for most applications. The Liquid FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The Liquid FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The Liquid...

The FurnaceMeter™ is available for gas flow measurement. These meters are fitted with integrated motorized flow control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control for most applications. The FurnaceMeter™ provides a retrofit foot print to most variable area meters to minimize piping changed when upgrading to differential pressure technology and in-situ calibration capabilities. The FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The advanced calibration and display modules on the electronic versions include integrated flow rate alarm and flow consumption totalizing functions. The FurnaceMeter™ meets current NFPA86...

High capacity range dry cooler series, perfect for large industrial refrigeration systems. 4 heat exchangers and double fan row can provide especially large heat capacity within limited placement area, making it the unit with the highest power supply per square meter. Available heat capacity ranges over 1 MW under nominal conditions (when ETG is 35%, Tin is 45°C, Tout is 40°C and Tamb is 35°C). W shaped large construction, assembled with smooth copper tubes, aluminum or copper fins and AC/EC fan motor technology. The clever frame design also allows for the installation of additional equipment under the dry cooler.

Introducing the Tacker – also known as a stapler for pipe fastening, this tool is exceptionally convenient for installers working on the manual installation of a minimum of 500 square meters of underfloor heating daily. With this tool, you not only save a significant amount of time but also preserve your health. The staple thickness is adjustable, with a staple height of 40-60 mm. Our tackers work with all popular staples in the market. The device features an adjustment system that prevents staples from falling out, allowing you to regulate the force of returning the arm to the base position. Upgrade your workflow with efficiency and precision using our reliable tacker. Your time matters, and so does your well-being. Choose quality, choose convenience – choose our Tacker.

Thorne & Derrick supply the HVAC and M&E Building Services industry with an extensive range of Leak Detection (Water & Gas), Trace Heating, Valves, Washroom Controls, Metering and Temperature Measurement & Humidity Measurement products – many HVAC products are compliant, accredited and approved under BREEAM, WRAS and TMV3 construction industry schemes. T&D distribute for Andel, ASCO, Cistermiser, Dart Valley, Dimplex, Elster, HORNE, Keraflo, Murco, Rotronic, RWC Reliance Water Controls and Thermon – we provide expert technical support with delivery from large stocks at competitive prices.

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT

Large heat and flow meters are often used continuously for decades after an initial calibration at external test benches. A recalibration of these meters within their actual operation conditions was not possible so far. In the best case scenario those flow meters are unmounted and recalibrated on an external test bench. Drawback of this method is an interruption of supply in addition to its already high costs. Furthermore, calibration conditions can differ greatly from actual operation conditions compared to test bench conditions, so even if calibrated, the measurement uncertainty in operation remains fairly unknown. This often leads to more difficult fluid distribution optimizations and leaves billing fairness to a gamble. More precisely measured values of flow sensors may uncover hidden saving potentials within the fluid distribution system and allow more exact performance indicators, improving energy efficiency.