Results for
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The S14 (Short version) are inserts for plastic with heat/ultrasonic installation into tapered holes with an 8° angle In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The tapered form facilitates proper seating and maximizes the surface contact between the insert and hole wall prior to the application of heat or ultrasonic vibration. These inserts are the best choice when using ultrasonic insertion techniques The insert's straight-toothed upper ring and oblique-toothed middle ring provide high torque and pull out resistance, ensuring complete filling of the plastic material in the cavities below Installation must be carried out using heat conduction or ultrasonic machines.
Request for a quoteFOCQUET
Belgium
"Aluminum motors offer a lighter solution to our customers, compared to a cast iron frame. STANDARD ALUMINUM MOTORS (OUR CODE: MA) - Three-phase motors with aluminum cage - IP55 protection - Class F insulation - Class B heating - Removable feet, which allows the terminal box to be turned to the desired side - Stored in 230/400V - 400/690V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).
Request for a quoteCARL SCHMIDT SOHN GMBH
Germany
7 pcs casserole set made of forged aluminium alloy, ProcalonPlus non-stick coating. Heat resistant black coated exterior. Lid made of safety glass with steaming hole. Heat resistant soft touch handles.
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Universally adjustable stand for laptops and tablets from 10″ to 17″. With infinitely variable height and reading angle adjustment. • Universal, adjustable table holder for laptops and tablets between 10” and 17” • Facilitates ergonomic working with its flexible height and tilt angle adjustability • Allows laptops to be used as desktop monitors (when combined with external keyboard and mouse) • High stability for secure working • Non-slip rubber surfaces protect the device from scratches • Folds to save space and easy to take with you • Improved heat extraction thanks to air holes and aluminium plate • Large recessed grip makes it easy to open and close the laptop • Extremely robust. Made from 3.5 mm thick aluminium to support laptops reliably and long-term • Creates space and keeps the desk tidy
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The SONIC-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics They are designed for quick and economical installation Opposing knurls of the insert offer high torque and pull out performance Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Also known as SONIC-LOK, with equivalent shape, features and dimensions
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The S19, S20 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S19, S20 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The S14 (Long version) are inserts for plastic with heat/ultrasonic installation into tapered holes with an 8° angle These are the longer versions of the S14 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The tapered form facilitates proper seating and maximizes the surface contact between the insert and hole wall prior to the application of heat or ultrasonic vibration. These inserts are the best choice when using ultrasonic insertion techniques The insert's straight-toothed upper ring and oblique-toothed middle ring provide high torque and pull out resistance, ensuring complete filling of the plastic material in the cavities below Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Inch version from 2-56 to 5/16-18 is available upon request
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The S29, S30 (Short version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates These inserts were designed to provide faster speed and ease of installation, and at the same time maximize torque and pull out performance. The outer profile was made symmetrical with respect to length, so that the insert does not have to be oriented during the installation process. These inserts are therefore suitable for automatic type installations in large volume The S29, S30 offer much higher torque and pull-out resistance than all other inserts Holes sizes are identical to those of the S19 and S20 inserts to provide an easy alternative
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The TECH-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics They feature a unique combination of helical knurls with opposite directions and knurled flanges, which substantially increase torque and pull-out resistance, even compared to the SONIC-SERT inserts Installation is simplified by the symmetrical nature of the insert, eliminating the need for orientation during automated or manual feeding Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Also known as TECH-SONIC, with equivalent shape, features and dimensions
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The S29, S30 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S29, S30 inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates These inserts were designed to provide faster speed and ease of installation, and at the same time maximize torque and pull out performance. The outer profile was made symmetrical with respect to length, so that the insert does not have to be oriented during the installation process. These inserts are therefore suitable for automatic type installations in large volume The S29, S30 offer much higher torque and pull-out resistance than all other inserts Holes sizes are identical to those of the S19 and S20 inserts to provide an easy alternative
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The HEAT-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics Designed for installation in notch-sensitive amorphous thermoplastic materials. The rounded knurling reduces stress on the contact surface while avoiding stress on the material in which it is inserted Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet They are available in unheaded and headed (flanged) versions. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. Also a screw can be inserted on the opposite side of the flange, allowing to achieve very high pull-out resistance. It also ensures a large contact area, which is useful for electrical contacts and specific applications Unheaded inserts in addition are symmetrical so they do not need to be oriented during installation process
Request for a quoteCONNECT CCCS LTD
Greece
The set contains: 1 Casserole with glass lid: 24 x 13.5 cm 6.1L 1 Casserole with glass lid: 20 x 11.5 cm 3.6L 1 Casserole with glass lid: 18 x 10.5 cm 2.6L 1 Casserole with glass lid: 16 x 9.5 cm 1,9L 1 Saucepan with glass lid: 16 x 9.5 cm 1.9L 1 Frying pan with glass lid: 24 x 6.5 cm 1 Frying basket with removable handle 1 Set kitchen utensils - 7 pieces 3 Metallic containers for spices and 1 magnetic base 2 Bakelite mats Characteristics: Construction Material: Stainless steel Heat resistant handles High strength glass lids with steam hole Uniform heat distribution 35% lower energy consumption Compatible with all stove tops 5 layers induction bottom With liquid measuring scale Weight 8.600 Kg Inox color Easy to wash in the dishwasher
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
Whether welding, machining or assembly, we have more than 350 specialists at our Krefeld site ready to serve you. An incomparably comprehensively equipped machine park forms the basis for realising your orders on schedule and to specification. Proven Siempelkamp quality for your production project with almost unlimited possibilities For our customers, we have manufacturing capacities - in the areas of turning and milling, welding & heat treatment, deep-hole drilling, balancing, pipe forming, hydraulic assembly and assembly of components - of around 300.000 hours per year on a hall area of over 41,500 m2. You can always rely on our many years of experience as a service provider in the field of contract manufacturing and as a close cooperation partner in foundry technology.
Request for a quoteKARPAN HAVLUPAN DIZAYN SAN. VE TIC. A.S.
Turkey
FLORANSA mirrored radiator is one of our best seller decorative radiators. It's not use only heating holes and entrances but also use for a decoration piece with it's beaitiful appearence.
Request for a quoteResults for
Heat holes - Import exportNumber of results
15 ProductsCountries
Company type