Heat exchanger cleaning - Import export

Complete graphite polyblock heat exchangers and impregnated graphite blocks for the spare parts business. The entire production process is carried out in Europe in accordance with the standard test conditions required in each case. We have been reliably manufacturing all impregnated graphite inserts for our European customers in the spare parts business for many years. all impregnated graphite inserts. Together with European partners, we also offer proven complete block heat exchangers including on-site cleaning service. Translated with DeepL.com (free version)

Our heatrecovery systems heat fresh air with the thermal energy of exhaust air and can be placed directly on top of a stenter frame. This system can also be retrofitted for older dryers. The benefits are high energy savings which allow payback periods of less than two years, depending on the layout and process, highly efficient platetype heat exchangers with nonstick coating, optimum ease of maintenance by removable drawersized heat exchanger modules, external cleaning of the heatexchangers in a hot water bath with ultrasonic cleaning equipment, high power density, higher than with usual tubetype heatexchangers.

Nero Olive Husk Boiler is available in 4 different capacities as 25 Kw - 40 Kw - 60 Kw - 80 Kw and include the following operational features : Automatic Fuel Feed Manual Heat Exchanger Cleaning (Via The Lever ) Cast Iron Burn Pot Manual Ignition ( With Ignition Component) Digital Electronic Board Weekly Timer Set Up Longevous boiler body and elegant design Temperature Control via room thermostat Strong Insulation Wide Fuel Hopper Sleep Mode Sanitary Water Use Via Hot Water Tank

Mirina Pellet Stove is available as 30 Kw and has the following operational features : Automatic Fuel Feed Manual Cleaning (Hand Mechanisation) Stainless Steel Burner Fireplace View Back Burn Protection Combustion Via Induction Fan Manual Heat Exchanger Cleaning Combustion With Modulation Digital Control Board Weekly Timer Automatic Ignition Longevous boiler body and elegant design Temperature Control via Room Thermostat Strong Insulation Wide Fuel Hopper ( 53 LT )

Heat exchangers, tanks, containers, boilers, metal structures, pipelines, etc. are complex, so the most effective way to clean them is by using equipment with exceptional power. Our company has high-pressure cleaning equipment with working pressure of 1000 bar (193 l/min). These and similar technical parameters also apply to other industrial cleaning equipment operated by our company

Our company’s employees use equipment specifically designed for this purpose – the extractor – to carry out complex dismantling and installation operations of heat exchanger bundles on a daily basis with a sufficient level of quality and safety. It is important to note that the professionals at KERTEX Energija are certified by the extractor manufacturer Peinemann Equipment B. V.

The VTA/N "Tank in Tank" heat accumulator features a stainless steel tank inside a carbon steel tank. This design combines the benefits of both a storage tank and a heat accumulator, allowing for simultaneous use in heating systems and hot water storage. The inner tank is made from high-quality food-grade stainless steel with a wave-shaped wall for increased resistance to pressure, improved heat exchange area, and self-cleaning through thermal expansion. The VTA/N-1 model includes a carbon steel heat exchanger at the bottom for optional connection to solar collectors or other heat sources (heat pump, gas, solid fuel, electric boilers). The VTA/N-2 model lacks a heat exchanger, allowing direct connection to any heat generator. The VTA/N-1-SOLAR PLUS model has an enlarged inner tank partially placed within the heat exchanger, improving efficiency with low-temperature heat sources.

Our automatic wood pellet boilers are produced in 3 different capacities mainly for domestic installations (15 Kw - 25 Kw - 35 Kw) The automatic wood pellet boiler series have the features of automatic ignition,automatic fuel feed,easy burner cleaning mechanisation,easy heat exchanger cleaning mechanistion (by hand lever),fully modulated combustion control,room thermostat control,weekly timer set up.All our boilers are tested to EN efficiency,emission test and CE Approval.

Our automatic wood pellet stoves are produced in 3 different capacities mainly for domestic installations (15 Kw - 25 Kw - 35 Kw) Our wood pellet stove series have the features of automatic ignition,automatic fuel feed,easy burner cleaning mechanisation,easy heat exchanger cleaning mechanistion (by hand lever),fully modulated combustion control,room thermostat control,weekly timer set up.All our boilers are tested to EN efficiency and emission test and CE Approval.

Our YBK model of Multi-fuel fired boilers are produced in 3 different capacities mainly for domestic and commercial installations (25 Kw 40 Kw 60 Kw 80 Kw) The YBK series have the features of automatic ignition,automatic fuel feed,automatic ash removal,easy burner cleaning mechanisation,easy manual heat exchanger cleaning mechanistion (by hand lever),fully modulated combustion control,room thermostat control,weekly timer set up.All our boilers are tested to EN efficiency and emission test and CE Approval.

Our wood pellet stoves are designed and produced in three different capacites as 15 Kw,25 Kw and 35 Kw. Our wood pellet stoves series have the features of automatic ignition,automatic fuel feed,easy burner cleaning mechanisation,easy heat exchanger cleaning mechanistion (by hand lever),fully modulated combustion control,room thermostat control,weekly timer set up.All our boilers are tested to EN efficiency and emission test and CE Approval. We produce all our products according to the top quality production requirements.

Our wood pellet boilers are produced in 3 different capacities mainly for domestic installations (15 Kw 25 Kw - 35 Kw) The wood pellet boiler series have the features of automatic ignition,automatic fuel feed,easy burner cleaning mechanisation,easy heat exchanger cleaning mechanistion (by hand lever),fully modulated combustion control,room thermostat control,weekly timer set up.All our boilers are tested to EN efficiency and emission test and CE Approval.

We design and manufacture products based on the project sent by our customers or according to customer requirements. Calculations, designs and projections according to customer demand and in accordance with ASME Code Section VIII Div 1 and 2 (American Society Mechanical Engineers), API 661, API 650 (American Petroleum Institute), TEMA (Tubular Exchanger Manufacturers Association), AD-MERKBLAATTER, CODAT, DIN, EN 13445, PED 2014/68 / AB and TSE. The most common processes in the Oil & Gas, Petrochemical & Chemical, Food & Beverages and Heavy & Light Industry require a significant number of equipment to exchange heat or to storage different fluids or components. The fluid can be either liquid or gas, and one of each flows into the tube and the other flow out of the tube is used to boil, condense or cooling the fluid.

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Know-how for special applications There are applications with very special requirements for the heat exchanger. Due to its decades of experience, Anthermo GmbH has the necessary know-how to be able to build special heat exchangers for special applications. So every year we build numerous heat exchangers that are a bit off the standard. Dimensioning with EDP programs With the help of EDP programs, Anthermo GmbH is also able to dimension and technically design special heat exchangers. The technical design and dimensioning is strictly based on the specifications and requirements of the customer. After the design, a three-dimensional CAD model is created. The CAD drawing approved by the customer forms the basis for production with the most modern IT-supported production systems.

Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

Tubes wound into a spiral shape Coaxial heat exchangers consist of two or more pipe coils, which are routed into one another and wound up in a spiral shape. The primary medium runs in countercurrent to the secondary medium. Fast temperature exchange This countercurrent design achieves a very rapid temperature transition with high efficiency between the liquids. Due to the spiral shape, the rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance. Condenser or evaporator function Coaxial heat exchangers can be used for both condenser and evaporator functions.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

A heat exchanger is a device designed for the transfer of internal thermal energy between two or more fluids with different temperatures. Typically, these fluids are separated by a heat transfer surface to prevent mixing. Heat exchangers find applications across various industries, including process, power, petroleum, transportation, air-conditioning, refrigeration, cryogenic, heat recovery, alternate fuels, and more. Examples of heat exchangers encountered in daily life include automobile radiators, condensers, evaporators, air preheaters, and oil coolers. Heat exchangers can be classified in numerous ways based on their design and applications.

Concepts, heat exchanger for energy recovery Energy dissipation and global warming cause damage to the nature and to the environment and thereby challenge our future. You can do a lot to prevent it. For instance, with innovative concepts and heat exchanger solutions for energy recovery so that water, wastewater, process fluids and exhaust vapours at the source in the building, in the industry, transported in the canalisation to the sewage treatment plan and even in the surface waters can be rendered useful thermally through heat transfer. Apart from the ecological aspects, investments in the realm of renewable energies are economically consequential. With KASAG as your partner for planning, design, engineering, and the construction of heat exchanger plants for energy recovery from waste heat, you are acting in favour of sustainability.

What you can expect from APROVIS high-temperature heat exchangers: - Transfer to water / thermal oil / air - Abrasion protection for abrasive components in the flue gas or product gas (e.g. wood gas) - Implementation of individual solutions (e.g. with regard to available space, thermal performance) - Use of various high-temperature stainless steels according to the application in question - Own measurements on site

Promix specializes in demanding cooling and heat exchanger tasks such as cooling and heating of viscous or decomposition-sensitive media / plastic melts. The Promix P1 heat exchanger is the unique combination of a very efficient static mixer and a powerful cooler. The novel patented technology opens up completely new process engineering possibilities in the cooling and heating of plastic melts and other viscous fluids. The simultaneous mixing and cooling processes in the P1 allow for very efficient cooling and heating without the formation of deposits or the risk of product decomposition. Advantages Promix P1 heat exchanger Very efficient cooling of polymer melts close to the solidification point Precise temperature control and uniform temperature distribution at the outlet Very robust construction Extremely gentle cooling and heating of residence time critical fluids Unique self-cleaning behavior Reliably scalable from laboratory test to production scale Test options

EVA SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EVA SERIES EVAPORATORS CAN BE USED IN HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOGUE DIMENSIONS AND IN THE DIMENSIONS REQUESTED BY THE CUSTOMER. EACH EVAPORATOR MANUFACTURED IS CONTROLLED AND TRANSMITTED TO THE CUSTOMER BY MEANS OF UNILAB LICENCE PROGRAMME FOR CAPACITY AND PRESSURE DROPS.

IT IS THE MOST WIDELY USED HEAT EXCHANGER IN INDUSTRIAL FACILITIES SUCH AS IRON AND STEEL, PETROLEUM, PETROCHEMICAL, GAS, POWER PLANTS, FOOD, PHARMACEUTICALS, LEATHER, TEXTILES, AIR CONDITIONING, SHIPS AND MARITIME SECTORS THE HEAT EXCHANGERS USED IN THE INDUSTRIES CAN BE USED IN ALL SECTORS WHERE THERE IS A SECOND ALTERNATIVE ENERGY REQUIREMENT FROM AN ALTERNATIVE ENERGY WHILE ONE FLUID RUNS THROUGH THE TUBES, OTHER FLUID FLOWS OUTSIDE THE TUBES BUT INSIDE THE SHELL AS PARALLEL OR ACROSS THE TUBES. SO, HEAT IS TRANSFERRED OVER TUBE SURFACES. IT CAN BE PRODUCED AS COPPER TUBE, BAFON TUBE(CU-NI), STAINLESS STEEL AND STEEL.