Handling magnets - Import export

Handling magnets are the solution for quickly and safely picking up, transporting, lifting or securing your steel products, also in automated processes. Magnetic product handling reduces both the duration and number of operations. Ideal for automating your processes. On this site, you will find various magnet systems for the metal, automotive and robotic industries.

With palletization magnets, you pack tins, aerosols, cans and glass jars with steel lids in one go. The magnet holds a layer of products without an energy supply. They are suitable for attachment to a robot arm or gantry crane, and help with packing and unpacking in automated processes. Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply. Palletization magnets hold a layer of products for as long as needed.

The manual magnet transporter HL-series are ideal wherever conventional load lifting magnets are not used due to the low material thickness. They can be used to transport sheets vertically or horizontally directly from the sheet shelf directly to the workplace or on a transportation vehicle. They are used for the secure transportation of sharp steel sheets in sheet storage, burn cutting operations and stamping. All technical data can be found in the .pdf file.

The manually activated permanent load lifting magnets with flexible single or double hooks are ideal for the horizontal and vertical transportation of materials. A wide range of models of the Mlay lifting magnets are available with bearing loads between 90 kg and 1825 kg for different material thicknesses. The flat magnet field is another advantage when destacking sheets or workpieces. Replaceable pole shoes make individual solutions possible. They can transport, for example, angle profiles or round sticks with different dimensions.

¹ Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white

Magnets in different designs as a visual highlight on your memo board.

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours

The FX-HV Horizontal-Vertical System will meet with its diverse setting almost any need. Overall height and focus can be adjusted by plug pins. Likewise, the device also can be used for up to 20% of its rated load without engaging under pads.The support pins are positioned in a way so that standing blanks can be struck, which, for example, is often required on the saw. Likewise lying discs and sheets can be placed. For horizontal transport, the system has a lifting eye on the back. The steel structure is completely coated, and the stable FX Lifting magnet ensures maximum safety. Special dimensions are available on request.

The magnetic Lifter /crane (magnetic hoist) uses high performance magnetic materials to make it smaller, lighter and more attractive. Unique magnetic circuit design, remanence is almost zero. The safety factor is high and the maximum pullout force is 3.5 times the rated lifting force. The handle switch is equipped with safety button, which can be operated by one hand and is convenient and safe. The bottom of the crane has a "V" groove design. The corresponding round steel and steel plate can be hoisted. No electricity, permanent magnetic force, safe use. It can be widely used in field operation, lifting and handling of steel, installation and handling of flat mechanical parts and various moulds. It is mainly used in the process of lifting, connecting, loading and unloading and handling of magnetic conductive materials of block, column and other parts. Especially for other lifting tools because of the inconvenience of fixed and laborious objects

Bright light in pocket size, for multi-purpose. 4 super-bright SMD LEDs on the front with more than 6 hours of lighting if the batteries are full. Additional switching step for 3 LEDs in the lamp head. Plastic handle with integrated magnet, 360° bendable. 360° swivelled, retractable hanging hook. With ON/OFF switch. Packaged in a clear box with a 10" display. LEDs: 4 SMD + 3 CREE Luminous flux: 200 + 20 lm Battery type: 3 x AAA Colour temperature: 6500 K Light duration: 6 h / 24 h Measurements: 6,3 x 3,6 x 9,8 cm

Magnetic Deaerator and Dirt Separator are used with a single device to dissolve microbubbles, dirt, and air in high performance in heating and cooling installations. Micro smart filter design is the most important element of the system design. Optimum air and microbubble separation and very low flow resistance are available. It also has a high degree of dirt handling. With its magnetic Separator feature, ViraPlus separates the moving metal particles in the installation more effectively and ensures faster cleaning of the installation. It also extends the life of your pump and other connecting equipment by minimizing the damage caused by metal parts to high-efficiency pumps that provide low energy consumption.

USED FOR HANDLING OF - scrap - turnings - burden, metal charge. 75% Duty cycle / Rugged cast case / Special coil design / Heat insulation gasket / Heavy-duty steel bottom plate / High-quality sealing compound. Compatible equipment: Sennebogen, Fuchs, Liebherr, Caterpillar, Hitachi, Volvo etc. Excusive one year replacement warranty

20 N integrated handle magnetic door holding High temperature and silicone cable Contactless coded electronic sensor Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 3 mm, 1 mm hysteresis Holding Force: transmitter + receiver in contact = 20N Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Housing mount: 4 tamper-proof M4 screws (optional ref: BH4) Handle assembly: M8 screw (optional handle) Mounting position: 2 (double wall brackets) Material: INOX 316L mirror polished Electrical connection: 50cm Ultra-soft silicone cord with M12 connector. Water resistance: IP 69K Extreme temperature: -40°C to +125°C Marking: laser engraving with mechanical punching of the serial number for permanent traceability

The MINI LIFTPLAQ is an handling tool allowing the handling of small size street manhole covers and plugs designed for professionals of dry and wet networks. Simple to use, its adaptable handle improves the handling during the different interventions. The intervention is complete, the MINI LIFTPLAQ can be unhooked from the covers and plugs by pushing down in the ooposite direction to allow the piston release the plate. There is no need for maintenance and is not submitted to any checks. This system, equipped with a powerful magnet, allows the small size covers and plugs to be loosened without touching them. The MINI LIFTPLAQ consists in a mechanical assembly.  It is equipped with a magnetic device allowing firm prehension of the covers and their handling. This tool is usable for dry and wet networks. Characteristics Lift the small size covers or plugs easily,effectively and with complete safety due to handles and its powerful magnet

The LIFTPLAQ® is an handling tool allowing the handling of street manhole covers and plugs, designed for professionals of dry and wet networks. This system, allowing street manhole covers to be moved without touching them and thus reducing the hardship by three. The LIFTPLAQ® consists of a mechanical assembly. It is fitted with a powerful magnetic device allowing a firm prehension and manipulation of the covers. Numerous advantages... liftplaqliftplaq Ergonomics : straight back and legs bent Security : no hand/cover contact Versatility : usable on all types of covers and plugs Mobility : easy to move Handling : reduces exertions by three Storing : little space required Grants from French occupational health and safety organiszations The basic kit consist The body of the tool The shaft with two handles and pointed chisel A brass anti-deflagration wheel balancer An articulated arm with strong magnet and curbed pin An handle for unlocking the magnet

Simple and versatile – a wide variety of shuttering tasks can be easily accomplished with the MST. Thanks to its low weight, the MST is very easy to handle without a crane. The system's excellent static properties and fl exibility make the MST a true all-rounder for manual operation.

The positioning drawbar has a gradual flexible range of +/- 60°. The adjustment occurs easily by loosening the hand brake. A wireless remote control can be installed directly on the handle to switch the magnets on and off. Other remote controls to control cranes are possible on request. All technical data can be found in the .pdf file.