Hand tools- non-power - Import export

Micron hand tools are made of high quality stainless steel material,

Special Box Head 'Mini' Interchangeable box head for use with the Sturtevant Richmont Mini-Torq preset clicker torque wrench. Further A/F's and/or special manufacturings available on request. Key Features: - Double hex point force transmission. - Fixed by 2 x M3 screws. - Forged alloy steel, chrome plated.

Special Open End Head 'Mini' Interchangeable open end head for use with the Sturtevant Richmont Mini-Torq preset clicker torque wrench. Further A/F's and/or special manufacturings available on request. Key Features: - According to DIN 3110. - Fixed by 2 x M3 screws. - Forged alloy steel, chrome plated.

Special Ratchet Head 'Mini' Interchangeable ratchet head for use with the Sturtevant Richmont Mini-Torq. Key Features: - Reversible R/L - Fine geared. - Forged alloy steel, body chrome plated.

NSPV Multi-function solar cable stripper for stripping 2.5/4/6mm2 cables

NSPV solar wire crimping tool Crimping Tool used for solar panel connector installing, crimping solar MC4 connector female male metal pins, perfect connection with solar panel positive negative, convenient hand tool for solar plant, commercial solar project, PV solar system.

Contents Blind rivet hand tool Flipper® and 3 PolyGrip® blind rivet sizes, in a lightweight plastic carrying case. Incl. 3 blind rivet sizes: PolyGrip® Alu/steel (3.2 x 8.0 mm) PolyGrip® Alu/steel (4.0 x 10.0 mm) PolyGrip® Alu/steel (4.8 x 10.0 mm)

Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 750 g Total length: 212 mm Total stroke: 16,2 mm Single action stroke: 1,8 mm Nosepieces/accessories Nosepieces:10/18, 10/24 and 10/29 1 maintenance wrench (on magazine) Operating instructions with spare parts list Advantages • The force increases when the handle is closed. This is made use of via the special arrangement of the lever when setting blind rivets: ergonomic design • The required manual force is reduced by around 40 percent if actuated several times. • Actuation lever with an opening spring for easy single-handed operation • Jaw mechanism with spring reset for safe and automatic mandrel ejection • Rivet mandrel collection container can be clipped to the body casing and is easy to empty • Larger device lift: a benefit when handling extra long blind rivets • Link pin on anti-twist bearings • Ergonomic lever positions and handle design

— The proven working method of the GESIPA® hand riveter Flipper® and the ergonomic principle also save up to 40% hand force when setting blind rivet nuts with the FireFly. hand force when setting blind rivet nuts. — A special lever arrangement as well as the ratchet mechanism allow working with extremely low hand force. — Tool-free change of mandrel and nose piece — Large stroke of 9 millimetres for easy setting of blind rivet nuts, even in thin joint material thicknesses, and for setting of PolyGrip® blind rivet nuts — Tool-free adjustment of setting stroke and mandrel lengths enables uncomplicated setting of blind rivet nuts of different lengths Sets blind rivet nuts from M3 to M6 aluminium and from M3 to M5 steel Technical data: Total stroke: 9 mm Single stroke: 1.8 mm Weight: 750 g

GBM 10 with threaded mandrel and nosepiece M5 including threaded mandrels and nosepieces M 4 and M 6, different blind rivet nut dimensions M 4 to M 6 made of alu for joint thicknesses of 0.25 to 3 mm. Blind rivet nut box Incl. 4 blind rivet nut sizes: Alu M4 x 6 x 11.0 mm Alu M5 x 7 x 11.5 mm Alu M5 x 7 x 13.5 mm Alu M6 x 9 x 15.5 mm

Fields of application: Extruded aluminum profiles with one-sided accessibility, such as. • sills/side members • safety systems • structural profiles Product portfolio: • Steel M6 with toothing • Steel M8 with toothing • Steel M10 with toothing Customer benefits: • Economical: Increased cost-effectiveness compared to hexagonal blind rivet nuts • Process reliability: Increase in process reliability and compensation of process fluctuations • Fast: Reduction of costs and process time per joining point • Customizable: Product-specific adaptation to the application, surface coating according to customer requirements • Compatible in the overall GESIPA® system: Can be combined with other GESIPA® innovations

Easy stroke adjustment, quick exchange of mandrel without extra tools. Working range: Blind rivet nuts from M4 bis M6 Alu and up to M5 steel and stainless steel.

Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 575 g Total length: 260 mm Stroke: 8 mm Accessories Nosepieces:10/18, 10/24 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of chrome-vanadium steel, forged • Steel inserts on all bearing points subject to wear • Intermediate lever system reduces the force required and dampens the tear-off effect • Narrow pliers head for difficult to access rivet locations • Ergonomic slip handles • Simple maintenance – fast jaw change

Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 575 g Total length: 260 mm Stroke: 8 mm Accessories Nosepieces:10/18, 10/24 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of chrome-vanadium steel, forged • Steel inserts on all bearing points subject to wear • Intermediate lever system reduces the force required and dampens the tear-off effect • Narrow pliers head for difficult to access rivet locations • Ergonomic slip handles • Simple maintenance – fast jaw change

Working range Blind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel Technical data Weight: 480 g Total length: 275 mm Stroke: 8 mm Accessories Nosepieces: 10/18, 10/24, 10/27 and 10/32 1 maintenance wrench, operating instructions with spare parts list Advantages • Body casing in high-quality die cast aluminium • Body head made of forged steel • Narrow head for difficult to access rivet locations • Opening spring for automatic ejection of the mandrel • Ergonomic handles

Smart handling • The well-proven principle of operation of the GESIPA® hand riveting tool Flipper® spares up to 40% of the hand force for setting blind rivet nuts • A special lever design as well as the ratchet mechanism provide a reduction of hand force • Exchange of nosepiece and threaded mandrel • The total stroke is 9 millimeter long for setting of new generation multigrip blind rivet nuts like new the GESIPA® PolyGrip® blind rivet nuts • Tool-free setting of stroke and threaded mandrel lengths allows simple setting of blind rivets of different lengths Working range Blind rivet nuts from M3 up to M6 aluminium as well as from M3 up to M5 steel Technical data Total stroke: 9 mm Single action stroke: 1,8 mm Weight: 750 g

Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT

• Containing pressing pliers and the most popular non-insulated end-sleeves • For establishing solderless, electrical connections according to DIN • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

• Smooth inside jaws for bending fine loops • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

with sheared nail recovery safety system, designed for the fastening of standard aluminum rivets from D. 2,4 to 6 mm (Ø 6 mm in aluminium) and high performance rivets up to D. 4.8 mm. Lightweight and ergonomic, it is equipped with a joint for compressed air on both sides. Standard rivets Ø 6 only in aluminium.. The riveting tool can be used for high performances FarBolt rivets and similar, by assembling the KIT cod. 74000090. The riveting tool is also suitable for X/S Trifar high performance rivets, by assembling the nozzle p/n 71345652. Maintenance instructions are available in the Video section. Maximum force 10500 N. Stroke 20,5 mm.

Hydropneumatic tool with holding of the rivet and nail recovery. Standard rivets Ø 4,8 only in aluminium. Maintenance instructions are available in the Video section. Maximum force 6639 N. Stroke 16 mm.

RAC AX83 Pneumatic tool with rivet holding and nail recovery. Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm.

Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm.

RIVETING TOOL for fastening Farbolt, Tamp and other structural rivets with Ø 4,8 and Ø 6,4. THE K33F is a tool with telescopic extending levers developed to increase the lever ratio and, therefore, decrease the effort in fastening the rivet.

Compared to the previous model (K20), it defers for a remarkable reduction of the strength applied to the levers, reduced sizes and weight and the sheared nail recovery.Standard rivets Ø 7,8 only in aluminium. The riveting tool is also suitable for X/S Trifar high performance rivets, by assembling the nozzle p/n 71345652.