Hand ergonomics - Import export

The combi setting tool Flipper® Plus is a combi setting tool for blind rivets and blind rivet nuts. A tool-free conversion from blind rivet to blind rivet nut setting tool is possible in under one minute in just a few simple steps. The ergonomically designed hand tool has a new ratchet function. The force increases when the handle is closed. This finding is put to good use in a special lever arrangement for setting blind rivets and blind rivet nuts. The required manual force is reduced by around 40 percent if actuated several times. Due to an actuation lever with an opening spring the tool can be used easily for a single-handed operation. The jaw mechanism with spring reset arranges a safe and automatic mandrel ejection. The rivet mandrel collection container can be clipped to the body casing and is easy to empty. The larger device lift is a benefit when handling extra long blind rivets. The Flipper® Plus offers a simplified setting procedure for blind rivet nuts.

Earphones with Bluetooth® 5.3 connection and hands-free function. Ergonomically designed, including touch control button integrated in the earpiece, with matching charging base. Built-in 300 mAh battery and presented in an individual kraft design box. Instruction manual in English and Spanish. Bluetooth Connection. Battery 30 mAh/ Charging Station 300 mAh

Slip Joint Pliers are versatile tools that are used for gripping and bending hardware. These pliers come handy in many different tasks in all kind of jobs. Ronix RH-1190-1196-1198 Slip Joint Pliers are ergonomically-designed hand tool by Ronix for you to have in your tools collection. These pliers come in 3 different sizes and help you to complete many kinds of tasks in your house or even in your workshop.

Slip Joint Pliers are multi-purpose tools for grasping and bending hardware. These pliers are useful for a variety of activities in a variety of vocations. RH-1190-1196-1198 Ronix Slip Joint Pliers are an ergonomically designed hand tool by Ronix that you should have in your toolbox. These pliers are available in three sizes and will assist you in completing a variety of jobs around the house or in your workshop.

Slip Joint Pliers are multifunctional hardware grippers and benders. These pliers are useful for a wide range of tasks in a wide range of professions. RH-1190-1196-1198 RH-11 Slip Joint Pliers are an ergonomically designed hand tool from Ronix that you should have in your toolbox. These pliers are available in three sizes and will assist you in completing a variety of jobs around the house or in the workshop.

The GEMÜ 717 2/2 or 3/2-way plastic ball valve has an ergonomically designed hand lever and is manually operated. The seat is made of PTFE. — High flow rates — Low weight — Nominal sizes: DN 10 to 100 — Operating pressure: to 16 bar depending on version and/or operating parameters — Media temperature: -20 to 100 °C depending on version and/or operating parameters

The complexity of hydraulic systems is continually increasing. As a result, the purity of the installed components is becoming more and more significant. This applies not only to pumps and valves, but also to the pressure lines that connect them. The ptcsystem® is easy to handle. It provides effective protection against initial damage and premature component wear. Compressed air at a pressure of 6-8 bar is used to route a cleaning projectile through the lines needing to be cleaned. The cleaning of complex bending geometries is possible. The chrome-plated launcher made of high-strength aluminium is an extremely durable tool, even under the toughest working conditions. Using a balancer, it can be hung up such that it is always ready to hand. With its ergonomically designed handle and rotatable compressed air connection, the ptcsystem® launcher is also suitable for cleaning small product series.

The Cleanflex Easy ionising air gun can be used for cleaning and neutralising surfaces. It’s unique features, not seen in any other ionising guns, make it very versatile to use. Ergonomic, hand or pull down, less air consumption, low noise, better blow-off force. - 24V DC input voltage and integrated ionisation power unit The Cleanflex Easy has a 24V input voltage, easily connect by a standardised M12 connector. No cumbersome high voltage cable and big transformer unit as seen in traditional ionisation guns. - Lightweight A Durable plastic housing and a well-constructed weight distribution make it a well balanced comfortable gun to use. - Ergonomic design The grip has been designed to suit women’s as well as man’s hands and has a soft grip and grip fixation making it very easy to hold without any muscle tension. - Full hand trigger (no RSI strain on one finger) The air flow is controlled with a full hand trigger, making operation very comfortable.

For 400 gr. Cartridges or 500 gr. Bulk Fill, Short stroke delivery system - Guaranteed lubrication with minimal lever action. Metered Output, Permanent Spring Load Design, Filler Nipple/Air Release Valve, Ergonomic Hand Grip.

Heavy Duty Side Lever Grease Gun For 400 gr. Cartridges or 500 gr. Bulk Fill, Metered Output, Permanent Spring Load Design, Filler Nipple/Air Release Valve, Ergonomic Hand Grip.

Side Lever Grease Gun with Pressure Gauge For 400 gr. Cartridges or 500 gr. Bulk Fill, Metered Output, Permanent Spring Load Design, Filler Nipple/Air Release Valve, Ergonomic Hand Grip. fitted with Pressure Gauge (0 - 400 bars)

Product Features: • Ergonomically designed for hand-held comfort. • Choice of five sizes and six colour combinations. • All sizes except 1553A available with or without battery compartment. • Moulded in general purpose ABS plastic with a soft, plastic overmould for comfortable grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into case. • Includes removable front panel (for easy modifications) and assembly hardware (except for smallest 1553A units). • Battery door and compartment version includes 4 battery clips (for 2 - AA batteries) and a 9 volt (PP3) battery clip. • Grey 1553 series enclosures include nickel plated screws. All other colours use black screws. Refer to product datasheet's for correct part numbers. • Designed to meet IP54.

Product Features: • Ergonomically designed for hand-held comfort. • Designed to meet Ip65. • Uses a one piece silicone gasket (installed). Enclosure utilized tongue and groove construction - moulded into the top and bottom halves. • Choice of three sizes - in two colours. • Moulded in flame retardant - ABS plastic (FRABS) - UV stabilized. With a grey overmould, soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into both the top and bottom of the enclosure. Standoff screws (M2) are not included. • Front panel is an integral part of the top half of the enclosure. • Choice of two enclosure colours, light grey or black - soft side "grip" plastic colour is grey. • Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.

Product Features: • The Clipper Series is a British-designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Ergonomically styled for a secure and comfortable grip. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top and bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening, membrane keypads or easily machined. • The base is moulded with bosses for easy P.C. board mounting. • The removable end panel is securely clamped by the two box halves and easily customised or replaced by an infrared panel. • Battery compartment (except on the smallest size) suitable for a 9V (PP3) battery. Battery clip not included.

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, triple, hinges, espagnolette holes and opening water drain slot on PVC and aluminum profiles Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit On the horizontal axis there is triple hole drilling mechanism Pneumatically working water slot opening system STANDARD ACCESSORIES Ø 5mmx L :80mm of router bit Air gun 2 x profile stops both left and right

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on aluminum profiles up to 3 mm of thickness. Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit STANDARD ACCESSORIES • Ø 5mmx L :80mm of router bit • Air gun • 2 x profile stops both left and right • Spray tool lubrication system • 2x horizontal clamps OPTIONAL ACCESSORIES • Additional router bits

The Sonatest AlphaGage+ series is definitely a key asset for inspectors, maintenance operators or QA technicians looking to measure essentially any engineering material thickness as it combines years of ultrasonic design and knowhow. Packaged in an extremely rugged and ergonomic hand held enclosure, the AlphaGage+ is a versatile piece of equipment as it can be used to perform integrity assessment of metal steel works affected by erosion or corrosion processes as well as measure precisely the thickness of critical pieces of equipment which have very strict quality control requirements.