Hall sensors - Import export

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides electronics

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides electronics

Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides

Features — 4-pole rotor with plastic-bonded magnets NeFeB — Threefold winding connected in delta — Internal Hall sensors for rotor position detection offest by 120° — Ball bearings — Multiple combination possibilities with gears, encoders, brakes — Power output in rated operation: 15,1 Watt — Multiple combination possibilities with gears, encoders, brakes and integrated electronics

High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.

The completely equipped electrical cylinder unit includes the motor transmission unit, along with the motor brake, two-channel Hall-IC sensor and two end-limit switches. All connection lines run directly out of the unit to make configuration and initial start-up easier, particularly for PLC operation. The fixation of the electric cylinder connections is compatible with commercial pneumatic and hydraulic cylinders.

Conductive plastic and Hall rotary sensors and encoders to determine an angular position. Our potentiometers and membrane sensors are also custom-made to your requirements.

Sensors of the series HG are used for speed measurement, for example of gear wheels, under extreme conditions, high temperatures, humidity, contaminated or oily environment and mechanical stress. Based on the Hall sensor principle the sensor detects moving ferro-magnetic metal parts. EGE speed monitoring sensors can be modified based on your own ideas.

throttle actuator can be used in boat engine, vehicle engine, kinds of machine control. 12V throttle actuator control 24v voltage is available Singal hall sensor and 2 hall sensor are ok

dc brush motor with flange.The brake,encode,hall sensor and other controller PCB could be available.For automation,smart home application

Widest linear actuator 12v selection at powerjackmotion.com stroke from 2inch to 40inch speed range from 8mm/s to 100mm/s Position sensor option: pot, optical, hall sensor

Widest 12 volt linear actuator resource store at Power Jack Motion Customization linear actuator request For any project and application Standard stroke from 2" to 40" Feedback sensor option: pot and hall sensor Limit switches are inside

Model: SLA600(heavy duty solar tracker actuator) Motor type: DC brush motor Input: 12/24/36VDC Load Capacity: 6000N Standard Strock Length: 450mm/600mm/900mm Drive screw: ACME Full Load Speed: 2.89mm / sec Duty Cycle: 20% Temperature: -26˚C~65˚C(-15˚F~150˚F) Limit Switch: Adjustable Sensor: reed sensor/Hall sensor/Optical sensor Static Load: 15000N designed for kinds of solar power plant project,PV project,CPV project

1. DC stepper motor with 24V 2. Max dynamic load 5000N 3. Max static load 10000N 4. Axial rigidity :2000N 5. Reset precision less than 0.2mm 6. Ball screw high efficiency 7. Salt spray test more than 480 hours 8. IP66 9. Hall sensor option

Model: SLA600 (heavy duty solar tracker actuator) Motor: DC brush motor Input (DC): 12/ 24/ 36 V Load Capacity: 6000N Standard Stroke Length: 450 mm/ 600 mm/ 900 mm Drive Screw: ACME Speed (Full Load): 2.89 mm / sec Duty Cycle: 20% Temperature: -26˚C to 65˚C (-15˚F to 150˚F) Limit Switch: Adjustable Sensor: Reed sensor/ Hall sensor/ Optical sensor Load Current: less than 2.5 A Static Load: 15000N

Details Data: Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor

SLA500 is new design for solar thermal tower power station and high concentrated PV. To meet the mirror panel drive performance, such as the rigidity, position precision, the inside limit switch is develop by POWER JACK MOTION in patent. It can help customer adjust the angle following customer’s solar tracker. All metal structure design can meet the harshest environments. Details Data: Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor

The heat capacity measuring insert is intended for measurement of the heat capacity temperature dependencies in constant magnetic field. In this insert the adiabatic method is used. The inner sample holder is equipped with the resistive heaters, resistive temperature sensors and Hall sensor. The heat capacity measurement insert characteristics: - relative measurement accuracy of heat capacity: 3 %; - sample dimensions: a rectangular bar 4×5×2.5 mm; - temperature interval – from 80 to 370 K; - magnetic field interval – from 0.02 to 2 T.

The thermal conductivity measuring insert is intended for measurement of the thermal conductivity coefficient temperature dependencies in constant magnetic field using stationary method. The inner sample holder is equipped with the resistive heaters, resistive temperature sensors and Hall sensor. The thermal conductivity measuring insert characteristics: - relative measurement accuracy of thermal conductivity coefficient: 3 %; - sample dimensions: a rectangular plate 22×4×2 mm; - temperature interval – from 80 to 370 K; - magnetic field interval – from 0.02 to 2 T.

Cylinder magnet is also known as rod magnet, it is a magnet with its length larger than diameter, this gets the magnet to generate very high level of magnetism from a relatively small surface pole area. Cylinder magnet has high "Gauss" values because of its greater magnetic length and deep depth of field, making them ideal for activating reed switches, hall effect sensors in security and counting applications, also it is ideal for educational, research and experimental uses. We are ready to make a custom cylinder magnet for your application, welcome to contact us for a further communication.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.

The DEC Module 50/5 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 250 watts.