Guide plate - Import export

Front plate in steel for better torsion resistance. (support or external force offcentered from the axis of the guide) Available on the Classic, Strengthened and Heavy series for cylinders Ø50 to Ø125. Front plate in steel on guide unit These guide units are equipped with a front plate a zinc steel for better resistance to torsion. Indeed, when the front plate exerts an offcentered pressure before the end stroke of the cylinder or if the guide undergoes an external force offcentered with respect to the axis of the guide, the generated twist can cause a matting of the housing of the rod in the plate if it is aluminum, especially if the penetration of the rod is low (as on the Classic series). This range is available on the Classic, Strengthened and Heavy series for Ø50 to Ø125 cylinders.

PEELING GUIDE PLATE

Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant.

The smart solution: Fully-automatic defatting machine ASD 460 enables removal of fat layers from loins and cutlets in predefined strengths. Advantages Fully-automatic recognition of the fat strength using Weber camera technology, with programmable controlled movementalong longitudinal profile Continuous work process Sensor-controlled electronic spring for perfect pressure application Uniform fat layers Considerable minimisation of reworking (trimming) Back bacon instead of small trimming cuts Clearly improved product image for cooking after slicing Product-specific blade holders Combinable with pre-installed derinder Options: Special Weber transport rollers Product-specific blade holders Product-specific pressure devices for products withand without bones Fixed or adjustable guide plates for supply and output belts

Not only great in the pan A very attractive characteristic of PTFE is its physiological safety. This makes PTFE particularly interesting for use in the area of drinking water and in contact with food. Thus, the famous Teflon®pan is only a small excerpt from an extremely far-reaching and extensive field of application in industry. Everything that has to run smoothly and where no product caking is desirable is a potential application for a PTFE coating. Practical examples - Scraping knife - Baking sheets - Containers - Mandrels - Colour mixers - Pastry form rollers - Tapered valve plugs - Cookie cutting rollers - Guide plates - Glue dispensers - Press plates - Pump pistons - Tyre moulds - Screw conveyors - Dough processing tooling - Funnels - Drying drums - Packaging equipment

Process: In feed bottle → pre-position →label cutting → gluing → labeling → label by press out → finish Hot melt OPP glue labeling machine is widely used for different material of container . The label cost is comparatively lower, it can meet the requirements of those users who have diverse kinds of the containers. It is the most economical models in cost to make mass production and intergrated operating. The equipment has massively used modularization design concept to make it easy and simple for users to change the bottles. Whether from the replacement of star wheel, guide plate or manual speed adjustment to automatic speed control, for example changing the label is only needed to change the program, the products concept of that the equipment is designed for users is embodied in everywhere.

With more than 44 years of experience, technological production and innovative approach in concrete machinery, ELKON has designed premium block making machine aiming at sustainable high quality and optimum performance in block production. ELKOBLOCK-36M which is specially designed by experts in their field to produce different types of blocks such as interlocks, curb stones, solid blocks, etc. has the capacity to produce concrete paving stone over 1.000 square meters in an 8 hours shift. Heavy duty design, robust machine structure and certified high grade steels used in production ensures highest durability and longest life time. Four columns system with chrome-plated guides for tamper head improves stability of machine and guarantees parallel movement of tamper head.

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.

MACK current collector trolleys are used in moving current consumers, such as cranes, suspended rail systems, or high rack vehicle systems. What are you considering? Where can we offer you support in system development? Our current collector trolleys, complete with carbon brushes and fittings, are guided by sliding plates or castors with bearings in contact-protected linear conductor lines. Our customers around the world include leading system suppliers who order customer-tailored current collector trolleys from MACK, ready to install from a single source. Of course, we can also produce any special type that you require, for example fast-running versions or double-current collector trolleys.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

High Speed Zipper Needle Loom designed by a logic design and lower gravity to manufacture the zippers with high speed and high productivity which attached the guiding plate leads to quality product without loss of efficiency, the universal shedding levers are shared, and low load, less noise and more steadiness coexist well. Convertible machine parts supported with various devices to provide wider range of fabrics multi-purpose for single machine as well. Application Nylon zipper, metal zi... A logic design to manufacture the zippers with high speed and high productivity. Precision weaving heads for easy adjustment to meet the demand of high quality control. Cam shaft and auto lubrication for 24-hour operation free of noise. Accurate discharge of woven tapes by belt transmission, without damaging the quality of the woven tapes. High precision of the elements in stream-lined design, for a high-speed running, durable life and low depreciation.

DM Panel-demagnetizing devices are quality, modern equipment with 100% duty cycle and a unique system that adjusts the intensity of the field size and the volume of the work, creating a low standby power consumption and high demagnetizing-quality be achieved. DM Demagnetizing devices can also be used as under- or tape devices. The workpieces are guided over the pole plates manually or by conveyor belt. Mass parts can be collected in a non-magnetic container and passed over the pole faces.

Technical data Dimensions (L/W/H) 120/90/145 cm Total weight 115 kg Equipment Mechanically bidirectional resistance system Autostabilization and positioning with saddle and integrated foot plate with positioning guide Easy-click seat height adjustment Options Balance pad 70 x 55 x 3 cm proxotrain software (in connection with Workoutpoint)

Technical data Dimensions (L/W/H) 120/80/135 cm Total weight 108 kg Equipment Mechanically bidirectional resistance system Autostabilization and positioning with saddle and integrated foot plate with positioning guide Easy-click seat height adjustment Options Balance pad 70 x 55 x 3 cm proxotrain software (in connection with Workoutpoint)

Technical data Dimensions (L/W/H) 125/80/100 cm Total weight 90 kg Equipment Mechanically bidirectional resistance system Autostabilization and positioning with saddle and integrated foot plate with positioning guide Easy-click seat height adjustment Options Balance pad 70 x 55 x 3 cm proxotrain software (in connection with Workoutpoint)

Technical data Dimensions (L/W/H) 120/100/145 cm Total weight 103 kg Equipment Mechanically bidirectional resistance system Autostabilization and positioning with saddle and integrated foot plate with positioning guide Easy-click seat height adjustment Options Balance pad 70 x 55 x 3 cm proxotrain software (in connection with Workoutpoint)

-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates

we are producing many parts ( Cabins , Motors , Buttons , Doors , Guide Rails , Wires , Flanshes , Fish plates , .... with many varieties and types