Grease nipples - Import export

Category Low pressure hoses and fittings / Central lubrication / Lubrication nipples / Taper lubrication nipples / Straight / Metric screw-in thread / Tapered thread / Stainless steel V4A Product number supplier 221011011v

Category Low pressure hoses and fittings / Central lubrication / Lubrication nipples / Taper lubrication nipples / Straight / Imperial screw-in thread / Stainless steel Product number supplier 221043200v

Lubrication of parts subject to high levels of stress such as plain, roller and rod-end bearings, spindles and guideways Advantages and benefits Highly suitable for high-stressed lubrication points Highly effective caused by optimal combination of components Saving of maintenance and lubrication costs by reducing downtimes and corrective maintenance Reduction of down times due to wearFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610 or OKS 2611 universal cleaner. Before filling for first time, remove anticorrosion agent. Fill bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50 000) and their housings should be filled completely. The bearing and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system.

The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.

The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

The SS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine.

Housing plastic. Ball bearing stainless steel 1.4112. Plain bearing insert POM. Bushes and grease nipple stainless steel 1.4301. Version Plain bearing insert white. Housing green. Stainless steel parts bright. Note The housings are very robust, hard wearing and shock proof. They are resistant to most alkaline solutions, weak acids (PH 49) and brines. In contrast to cast or steel housings the special plastic in these housings prevent the formation of microorganisms. Drawing reference 1) ball bearing 2) plain bearing

The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.

Blickle cast iron wheels are made from robust grey cast iron with a hardness of 180 to 220 HB. They are extremely wear-resistant and provide very little rolling and swivel resistance. Cast iron wheels are self-lubricating due to the graphite which they contain. However, they should always be sufficiently lubricated using the grease nipple, particularly when using the plain bore version. Due to the relatively high level of floor pressure, care must be taken when using this wheel series on sensitive surfaces. The silver coating on the wheels can change colour at high temperatures, but this does not affect the corrosion protection provided by the coating. Standard cast iron wheels are designed for use in temperatures of up to 120°C.

Housing, stainless steel 1.4301. Bearing, stainless steel 1.4125. Seal, rubber NBR. Note Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.

The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.

Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.

Front cardan shaft complete with joints and grease nipples for wheel loader FERRUM DM416 x4

Cardan shaft medium complete with joints and grease nipples for wheel loader FERRUM DM625 x4

Short cardan shaft complete with joints and grease nipples for wheel loader FERRUM DM625 x4

Long cardan shaft complete with joints and grease nipples for wheel loader FERRUM DM625 x4

with bronze bushing & grease nipple | galvanized | weight 4,8 kg A - 280 mm, B - 100 mm, C - 85 mm, D - 75 mm

with bronze bushing & grease nipple | galvanized | weight 2,5 kg A - 190 mm, B - 50 mm, C - 55 mm, D - 75 mm

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion. Hydraulic - 90° Angle Type

Case hardened, zinc plated and passivated for resistance to corrosion

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion.

Standard Slide-On Connector with Knuckle Joint, and M-M Connector to Snap-On Adaptor (Easy conversion from standard hydraulic grease nipples to hook-on type). Part No. 54 2094

For Concave Grease Nipples. Thread 1/8” Part No. BSP LC1

Hydraulic Grease Nipples. Case hardened, zinc plated and passivated for resistance to corrosion.

For Damaged Grease Nipples of all types. The pointed end of the connector is used to deflect the ball in the grease nipple thereby permitting the injection of grease. Thread 1/8” BSP Part No. CC1

For Old Style Bayonet Grease Nipples. Thread 1/8” BSP Part No. BC1

Precision Hydraulic Coupler with 90 Degree Elbow. To fit grease nipples in confined spaces. Part No. 54 2095

Accu-Greaser 18 V Premium-SP Battery operated grease-gun 18V Li-Ion, suitable for 400 g pull-off cartridges, according to DIN 1284, item features: - LCD battery level and LED overload indicator - Li-Ion battery 18V - 1500mAh - multi purpose wide range input charger (12 -240 V/ 50-60 Hz), - overload protected (charging time approx. 100% in 40 min. / - 80% in 20 min.) - max. delivery 115 ccm per min. - grease barrel for 400 g pull-off cartridges or 500 ccm bulk grease - filling-/ and air venting nipple - high pressure safety rubber-hose (1.650 bar b.p.), length 750 mm - incl. 4-jaw precision hydraulic connector - carry-along case with space for spare battery and spare cartridge - UK 3 pin plug supplied Part No. 34 278 32