Granule drying - Import export

Origin Brazil ICUMSA 45 ICUMSA Attenuation index units Method # 10-1978 Ash content 0.04% Maximum by Weight Moisture 0.04% Maximum by Weight Magnetic Particles 4 mg/kg Solubility 100% DRY & Free Flowing Granulation Fine Standard Polarization 99.80° Minimum Max AS 1 P.P.M. Max OS 2 P.P.M. Max CU 3 P.P.M. Colour Sparkling White Sediments NONE Radiation Normal w/o presence of cesium or iodine SO2: Certified SO2 70 MG/KG MAXIMUM Substance Solid, Crystal Smell Free of any Smell Crop Recent Crop

Instant yeast is a dry yeast that comes in smaller granules than active dry yeast, absorbs liquid rapidly, and does not need to be rehydrated or proofed before being mixed into flour.

M06-3 is a loss-in-weight controller for high precision continuous dosing application. It can be applied to the liquid/powder/granule/flake dry bulk materials, providing the function of accurate and stable feeding, reducing material waste, and improving the consistency of the complex material. M06-3 is mainly used in the chemical industry, plastics, rare earth smelting, and other industries.

Injection moulders for making very small parts are faced with the unique challenge of being able to dry just the right amount of material for their process. Operating in extremely critical production conditions, these smaller throughputs can present considerable problems. It is important to scale the drying to the size of the moulding machine. The LUXOR CA S 0.75 to 5 range of compressed air micro dryers is specifically designed for small material throughputs. The range comprises of a modular line of correctly sized drying equipment to help moulders meet the small tolerances without waste or contamination. These small dryers take factory supplied compressed air which is expanded to atmospheric pressure. This produces dry process air with a very low dew-point which is then heated to the required drying temperature. No desiccant is required.

LUXOR A series dryers with ETA-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications. They have either two or three fully insulated stationary desiccant beds with separate process and regeneration blowers which provide consistently low dew-point air to the process, while reducing energy consumption. The advanced LUXOR A series consists of ten models with drying capacities from 80 to 2400 m3/h. Each advanced system dryer can be flexibly combined with all LUXORBIN A drying bins from 15 to 2400 litres. In addition, motan offers a range of extra-large drying bins with volumes from 3,000 to 13,000 litres. These are also available with gas heating. All motan system drying bins are made of stainless steel, are completely insulated, and have individual heating as well as temperature control.

LUXOR S dryers operate at maximum efficiency and with minimum operating maintenance. The opportunity to have multiple material bins connected to one dry air generator provides our customers with maximum flexibility and no interruption to production. Drying can continue while material is changed in any one bin, minimising loss of valuable production time during material changes. The compact LUXOR S series consists of five models with drying capacities from 40 to 160 m3/h. Each dry air generator can be flexibly combined with a combination of drying bins ranging in size from 15 to 600 litres.

The COMPACT swift dryers are designed with flexibility in mind. They offer an integrated solution, combining the drying and conveying of the raw material in one unit. The dryers are available in two versions and are each equipped with one drying bin of the size 80 or 150 litres and up to 2 hopper loaders with a capacity of 4 litres each. The COMPACT swift A dryer is provided with advanced functions such as dew point control and dry air conveying function with line purging. Thanks to a modern 7-inch colour display with touch screen, all conveying and drying functions can be shown and monitored in a user-friendly way. 16 user languages can easily be selected.

LUXOR HD hot air dryers offer the most effective way of conditioning moderately hygroscopic plastic granules for processing and removal of surface moisture. Pre-heating of raw materials stabilises the production parameters and reduces processing energy costs. motan‘s fully insulated LUXOR HD hot air dryers cover a performance range from 7 to 1100 kg per hour. The dryers can either be mounted directly on the throat of the processing machine (up to 150l) or on a support frame beside the machine.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. The fully-insulated LUXOR CA S compressed air dryers provide a cost-effective solution for highly efficient continuous drying of all types of plastic granulate with material throughputs up to 25 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.

Both the LUXOR E A and LUXOR EM A dryers with optional ETA plus® energy saving technology are specifically designed to supply consistently low dew-point air to one drying bin, while reducing energy consumption. The LUXOR E A dryer is designed for use with existing conveying systems or hopper loaders. Whereas the LUXOR EM A offers a machine dedicated solution with integrated dry air conveying for up to two processing machines and the drying bin. There are three sizes with drying bin capacities of 60, 100 and 150 litres. The LUXORnet controls utilise modern, flexible BUS-technology. As standard, the colour touch control manages the dry air generator, one drying bin and with the EM version, material conveying to one drying bin and two processing machines. The integration of dry-air conveying and material proportioning provides maximum flexibility and productivity.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. LUXOR CA A series compressed air dryers with ETA­-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications, with material throughputs up to 20 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.

The new LUXOR swift 250 dry air generator offers the ideal price-performance ratio for standard applications in the drying of granulate. The LUXOR swift 250 has a dry air capacity of 250 m³/h. The dry air generator can either be operated with a single drying bin or combined with multiple preconfigured drying bins in your plant. The drying bins are available from 100l to 900l sizes. This gives you the maximum possible flexibility and an uninterrupted production flow. For more energy efficient drying, additional functions such as dew point control or return air cooling can be added. Versatile use Different drying bin sizes for different applications Thanks to motan’s automatic air regulation the drying process can be optimized. Different sizes of drying bins with integrated heating allow a wide range of applications with proven motan drying technology.

Drying Drying systems for granulates and powder Whether surface moisture, capillary moisture or crystal humidity – each product has its own requirements of the drying. The following applies: With Ebbecke Verfahrenstechnik AG your contract drying is in the best of hands, because we dry granulates and powder carefully according to the specific requirements. On request we can even develop new and innovative drying processes for you. System diversity as a basis for a perfect result With the selected drying process, our process engineers take into account for example the temperature sensitivity, resistance to ultraviolet radiation (infrared radiation), the surface structure and the capillary structure of the product which is to be dried. Of course, the differences in the output moisture content and the desired residual moisture must be included in the procedural evaluation of an efficient drying. However, not every drying system is suitable for every material which is to be dried. To get

The METRO SG HES range of single-phase material loaders enable processors to automate a key area of the production process cost effectively, bringing significant benefits for process management. Plastic granulate is conveyed quickly and cleanly to a processing machine hopper, a drying bin or a day bin as needed. The material loader is equipped with its own control, so that it recognizes when material is needed and automatically starts conveying. This keeps machines running and avoids costly downtime while eliminating material wastage, keeping the workspace clean and safe. The METRO SG HES range can handle throughputs of 15 to 200 kg/h.

METRO SG HOS system material loaders can automate important areas of the production process cost-effectively and efficiently. Virgin and regrind material is conveyed quickly and cleanly to the hopper of a processing machine, a drying bin or a dosing and mixing unit. Material is delivered exactly when needed keeping machines running and avoiding costly downtime. Material wastage is eliminated and the work-space is kept clean and safe.

METRO G is the most comprehensive and flexible material loader range on the market. It combines the best of two established material loader ranges – colortronic and motan. Whether simple or highly complex, METRO G’s modular building block system will provide you with an individual solution tailored to your needs.

The Wrights MD-110 is a complete compact granulation and separation system to retrieve 99.9% of clean copper from your house hold and waste cables. This granulation system is a fantastic piece of equipment that comes with a lot of extras included in the price i.e. 3 different sized granulation screens for doing large cables or fine data cables, also an extra full set of granulation blades which not many granulation plants will give you and depending on the type of system, screens & new blades can be quite costly. - Length: 1650mm - Width: 1115mm - Height: 1810mm - Machine weight: 785kg Approximately - 4 x Fixed blades, 6 x rotating blades - 6.7kW Motor - Production rate: 110Kg per hour

ICUMSA: 45 RBU ICUMSA Attenuation index units Method # 10-1978 ASH CONTENT: 0.04% Maximum by Weight MOISTURE: 0.04% Maximum by Weight MAGNETIC PARTICLES: mg/kg 4 SOLUBILITY: 100% DRY & Free Flowing GRANULATION: Fine Standard POLARIZATION: 99.80º Minimum Max AS: 1 P.P.M. Max OS: 2 P.P.M. Max CU: 3 P.P.M. COLOUR: Sparkling White SEDIMENTS: NONE SO: mg/kg 20 REDUCING SUGAR: 0.010% Maximum in Dry Mass RADIATION: Normal w/o presence of cesium or iodine SO2: Certified SUBSTANCE: Solid, Crystal SMELL: Free of any Smell

USAGE AREAS * In marble machines * In the supply of combustion air for gas, diesel burners * In the transfer of residues such as dust, clippings, etc. * In the storage of granules and particles * In blow-drying machines * In textile machines-placket spreading machines * At exhaust metering stations * In extruder machines * Can be used safely in industry for wide purpose

Granulated alfalfa grass Protein: 12-21%; fiber: 32% max ; ash: max 9% The diameter of the pellet is 8-10 mm; Type of packaging (at the request of the buyer): big-bag-1000 kg, bags - 15-25 kg. The price is negotiated separately depending on the conditions and volume of the order; You can also buy pellets of any other type you need from us: 1. alfalfa granulated 2. wheat bran granulated 3. dry spent grains Ready to work under long-term contracts, our mail: semena-pol@ukr.net Delivery on terms of FCA, CFR

The Granulation Line integrates into a single frame and control panel all options for solid forms production process: ■ Mixing and Granulation: High Shear Granulator. ■ Drying: Fluidized Bed Dryer. ■ Calibration: Conical and Cylindrical Calibrators. It minimizes the space requested in clean-room, reduces the risks of cross-contamination, and gives maximum versatility to process development and scalability studies.

Fluidized Bed Dryer designed for 3 different processes: ■ Drying of wet granulate (dryer). ■ Top drive granulation (granulator). ■ Bottom spray coating (coater). Innovative high-quality equipment certified by accredited entities. Fully designed and built in Europe following regulatory requirements and GMP´s normative. STE TECPHARM offers all range of services: installation “turnkey concept” in the client facilities, start-up, qualification, training, and production support. MAIN FEATURES ■ From 30 L to 1.540 L. [Other dimensions on request]. ■ In-wall design concept. ■ Built-in AISI 316L, mirror polished Ra < 0,5. ■ PCL + HMI in manual and automatic mode, with recipe editing. ■ 12 bar pressure-shock resistance.

The TransiTec pneumatic conveyor S-WS is used when, for example, local conditions do not allow the use of a spiral conveyor, for example when the minimum radius of a flexible conveyor can not be met or to overcome larger conveyor lines. Here are some features of the pneumatic conveyor: - Suitable for conveying granules and dry powders - Large filter surface - Filter cleaning by means of compressed air - adjustable interval filter cleaning - High throughput - Ideal for long conveyor lines - Fields of application: plastics and food industry    as well as chemical and environmental sector. - Different filter sizes up to 10 m2

The circular dryers are used for stainless drying of all types of workpieces. By using the hot-air blower or the indirect heating through heating rods below the tub, a uniform drying of the workpieces and the drying granulate is ensured. The additional advantage is that it brightens, repolishes and degreases workpieces. Both versions can be configured as individual systems in combination with a new vibratory finishing machine or as a module for an existing vibratory finishing machine. The drying medium and the workpieces are brought into a rotational movement through a generated vibration. The desired drying or post-treatment process are created through the contact of the drying medium and workpieces. The workpieces are automatically screened out of the dryer and transported from the device through the optional manual or pneumatic separation equipment.