Granular materials - Import export

It is designed to measure continuously material throughput rate and weight for monitoring of granular materials. The accurate information is obtained regarding mill yield by installing a group of scales on different product lines

It is used for cooling lumpy and granular materials in the food and feed industry. It provides effective cooling with the reverse air flow vertical cooling principle. It is easy to install and energy saving is high.

Metal parts inside the powdered or granular materials transported between the machines in the process are captured by magnets Decoupled. The magnet is placed on the lid that opens outwards. When the lid is opened, the magnet is taken out and provides ease of cleaning. Since it is produced with natural magnets, there is no energy consumption. Applications Fields ◾ At food industry ◾ Flour & semolina mills ◾ Feed mills ◾ All grain cleaning plants ◾ Corn processing plants ◾ Oil factories ◾ At plywood factories

The body of a tubular jumbo bag is designed with a tubular fabric, which is usually sewn on a square bottom panel. As a result, there are no seams on the body part, this creates a more aesthetically pleasing packaging. Moreover, with only a top and bottom piece sewn into the body, fibc tubular bags are great for fine and granular materials.

Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) methods, atomic emission spectrometry with excitation by an inductively coupled plasma (ICP-AES). DIN EN 993-18:2002-11 - Test methods for dense shaped refractory products - Part 18: Determination of apparent density of granular materials by the water displacement method under vacuum.

Our machine is used in bagel, roll, sandwich and hamburger breads. Machine settings can be made on PLC and digital display. These settings are saved in the recipe and do not want to be re-adjusted in product change. Machine chassis is made of 304 Cr-Ni sheet metal. It has the feature of spraying the desired amount of water, eggs, slurry and molasses on top of the products in the flat tray or molded tray. At the same time, it can sprinkle the desired amount of granular materials such as sesame, bran, kernel, rye on the products on the flat tray or molded tray. It is simple to use and clean.

The GBOX-802CD is a weighing module developed for linear feeder packing systems with vibrators. The new algorithm makes the weighing control faster and more accurate. Various communication ports make the equipment easier to interconnect with the system. It is suitable for weighing powdery or small granular materials in sizes from 10.0 to 5000.0 g, such as sugar, salt, seeds, rice, sesame, spice, milk powder, coffee, washing powder, etc.

LF-5K is a linear feeder for granular materials and some powder materials. The vibratory feeding mechanism achieves multi-stage feeding. The pneumatic cylinder drives fast discharging. LF-5K linear feeder has a wide weighing range with high speed and high precision, which can be widely used in quantitative packaging machinery of grain, feed, chemical, rubber, and plastic industries.

Bulk bag dischargers ensure the smooth discharge of materials. They are divided into the particle type and the powder type dischargers. The bulk bag powder discharger is equipped with a vibrating bridge destroyer and a sealed connection tube to guarantee a dust-free process. Crane or stacker feed are both optional. Bulk bag dischargers are suitable for all kinds of granular or powdery materials such as food or chemicals.

Ribbon mixer is most suitable for uniformly mixing granular and powdery materials. The spiral twin screw design inside the mixer increases the mixing speed as well as the uniformity of the resulting mixture. The advantages of the ribbon mixer are its economical price and easy maintenance. High consistency uniformity can be achieved in approximately 7-15 minutes per mixing batch. Suitable materials, such as sugar, cream, instant coffee powder or frying powder, etc. can also be fed into the machine via nozzles or via liquid pumps for liquid mixing. Options for combined equipment are pumping systems, weighbridge or powder feeding stations.

SFSP Series Hammer Mill is mainly used for crushing granular materials such as corn, cereals, chaff, sunflower skin, etc.The machine has the characteristics of high output, stable work, safety and reliability, convenient loading and unloading, and easy operation. And it has strong adaptability to materials, and is currently the ideal high-efficiency crushing equipment, which is widely used in processing industries such as grain, feed, oil, food and chemical industry. The grinder applies direct-connect drive. The raw materials in the grinding room are broken into peaces by hammerhead striking and cutting. In addition, the attrition-of among materials and between material and sieve plate makes materials smashed more. Finely ground particles will pass through the sieve but the residues further are ground until them change enough to pass the sieve mesh. So, all the materials will be ground completely.

Is widely used in Pharmaceutical, Cosmetics, Food and Chemical industries etc. It is suitable for mixing dry powder or granular materials with perfect flowing properties. Servo conveyor system Base holds the mixing vessel which made of stainless steel (304) Cylindrical vessel with two conical bases. The vessel rotates on horizontal axis. And the Inner edges wrapped to prevent accumulation of the material. Circular cover, sealed with silicone gasket Discharge hole fitted with manual butterfly valve Guardrail (Profile) connected to a safety sensor to prevent the vessel from rotation while opening the rail Sensor system stops the mixer in the desired position (The discharge hole to the bottom) Available certification up on your request: UL, CE, GMP, FDA, ASME. Available documents up on your request: I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION The 3D blender is widely used in pharmacy, chemical industry, food industry, scientific research, ect… It is suitable for blending drypowder or granular materials with good flowing properties. Powder can be loaded into the 3D blender through a wider opening manhole Multidirectional motion mechanism for a better blending process Final product can be discharged through a butterfly or slide valve Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Is widely used in Pharmaceutical, Cosmetics, Food and Chemical industries etc. It is suitable for mixing dry powder or granular materials with perfect flowing properties. Servo conveyor system Base holds the mixing vessel which made of stainless steel (304) Cylindrical vessel with two conical bases. The vessel rotates on horizontal axis. And the Inner edges wrapped to prevent accumulation of the material. Circular cover, sealed with silicone gasket Discharge hole fitted with manual butterfly valve Guardrail (Profile) connected to a safety sensor to prevent the vessel from rotation while opening the rail Sensor system stops the mixer in the desired position (The discharge hole to the bottom) Available certification up on your request UL, CE, GMP, FDA, ASME.

With the volumetric dosing and mixing station SPECTROCOLOR V, motan offers a simple solution for the economic production of plastics parts: precise dosing and homogeneous mixing with highest repeatability. Our unique gravity-mixing principle offers you a high consistency of mix for all the components before they reach the extruder. This plays a key role in guaranteeing you perfect plasticization and homogenization of the materials. SPECTROCOLOR V doses and mixes all easy to normal flowing granular materials. Up to six dosing modules, supports both flood-fed and starve-fed extrusion.

Butterfly Valves are used in all types of powder and granular material processing plants where interception of gravity-fed or pneumatically conveyed dry materials is required. They are fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts. Due to their special design and engineering materials used, they represent a particularly cost-effective yet most efficient solution.

Loading Bellow, dry powder and granular the bulk raw materials in the structure reach the silo quickly, ensures dust-free and safe filling. Silo bass loading bellows during raw material loading It prevents the Körük dust from spreading to the environment.

Characteristics : The packaged material is granular (grain, rice, salt, sand, etc.). Weighing range: 1 - 25 Kg / bag. Two weighing tanks (double the weighing speed). Tolerance: 0.2%. Weighing / packing speed: 360 - 900 bags / hour. Supply voltage: 380V (50Hz). Price at request. Benefits : - two weighing tanks that will increase packing capacity and intake Optionally the line can be equipped with the following devices: - conveyor belt with variable length between 2m and 4m. - Bundle printing of the date of validity, packing, lot number, etc. - vertical loader for feeding the silo in which the weighing and filling material of the bags is stored Depending on the specifics of the user, closing of the bags can be done by thermal bonding instead of sewing (specific for packing in transparent polyethylene bags)

Butterfly flaps (Butterfly Valves) are valves controlled by equipment such as pneumatic actuators and manual levers that allow product passage in storage units such as bunkers and silos. Butterfly Valves are used in all kinds of powder and granular material processing plants and offer an economical solution.

RFM101S fully automatic stick pack machine for filling and sealing. It is applicable for packing powder and granular materials such as sugar, salt, silica jel, etc, in the industries of pharmacy, food, and agricultural chemicals.