Glass-fibre reinforced plastics - Import export

For factory automation we offer compact fieldbus I/O-modules for PROFIBUS-DP, DeviceNet™, CANopen, INTERBUS, AS-interface®, Modbus TCP, Ethernet/IP™ and PROFINET. The IP67-modules for use in harsh environments have glass-fiber reinforced plastic housings and metal-connectors, are fully potted, vibration and shock-proof. The IP20-modules for DIN rails can not only be installed in control cabinets, they can also be used to integrate small, decentralized control boxes with a few I/O-signals to a fieldbus network.

The perfect solution for the treatment of edges and corners - and this almost dust-free! Powerful, efficient and very user-friendly! The FLIP® is also extremely versatile. The different attachments - short, long, corner or milling attachment - can be changed on the job site easily and quickly. The FLIP® stands for ergonomics, simple adjustment and operation - ideal for efficient sanding of edges and corners. It was the first edge sanding machine in the world to be awarded the "Wood Dust Tested" certification. It works almost dust-free thanks to an exceptionally powerful extraction and a special emptying device for the dust bag. Motor housing, handle and attachments are made of abrasion-resistant, glass-fibre reinforced plastic. This converts the FLIP® into a very robust machine. The various attachments can be changed quickly and easily, in order to adapt the machine always directly to the individual job site conditions. It is available with the short, long or corner attachment.

Simply as a replacement for steel! Plastic does not corrode and is much less costly than steel when ordered in large batches. Glass fibre reinforcement makes the plastic tough and loadbearing. Upon request, we can check whether your steel or stainless steel parts can be replaced by glass fibre-reinforced polyamides or polyurethanes at lower cost. Threads and internal threads are also possible, also steel inlays. It just depends on the batch size.

We produce blanks from plastic in line with your specifications. Upon your request, we also process pellets specified and also provided by you in our injection molding department. We keep a wide range of common plastic grades in stock, which we process into test specimens of various sizes according to your specifications. On request we also procure special materials and process these in line with your specific requirements. We process every available type of pellets to form DIN A5 format sheets or smaller sheets lap shear test specimens 100 x 25 x 3 mm dumbbell test specimens We deliver various surface finishes structured high-gloss automotive graining used by a wide range of car manufacturers We deliver every SMC quality depending on the availability of prepregs with class-A finish also in automotive quality Types of plastics ABS, PC, PE, PMMA, POM, PP, PS, PVC, PET, PTFE, PA6, PA6.6, PU, Polymer-based glass fiber-reinforced plastics

1581 latch lock, mortise type, 8 mm hub, metal nickel plated, latch and hub of glass fibre reinforced plastic, 40 mm backset, incl. strike plate 2528

Robust and economic plastic handwheel. Various sizes. Hub made of zinc-coated steel for high stability and easy shaft mounting. Various hub versions. With thread for mounting a turning handle (see accessories).

Low-cost and compact turning handle made of glass-fiber reinforced plastic. Various sizes. Surface with rounded edges avoids accumulation of dirt. Hub made of plastic or metal. Various hub versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Combined analog-digital position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Counter with 5 decades. Special scales, also for small numbers of pieces. Dustproof or oil-filled versions.

We accompany you with our design and development from the idea to series production! We process all common thermoplastics for you. Besides polyurethane, these are mainly: PE (polyethylene), PA (polyamide), PP (polypropylene), POM, ASA, TPU, PP, TPE as well as glass fiber reinforced plastics. Advantages of the injection molding process are low unit costs with high batch sizes. Before an injection mold is ordered, we build view samples for you as laser-sintered elements or by means of 3D printing. In this way, the desired part can already be viewed without having to spend a lot of money. Our machines inject molded parts from 5 to 6000 grams.

The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.

The patented casting resin system ALWA MOULD D consists of two resin components and an aluminium filler. The fast curing of the material allows to produce your own technologically highest quality moulds in just a few hours. As our material is very good castable, compact moulds of any desired volume can be made from our product, such as acrylic baths, boats, etc. (<1 kg – 2500 kg). In comparison to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.

STRATE AWALIFTSCHACHT pre-fabricated shafts are used in private, industrial and municipal areas where the installation of sewage pumping stations within existing or planned buildings is not possible. The different design sizes of the pre-fabricated STRATE AWALIFT shafts allow the optimum size to be assigned to every individual AWALIFT pumping station. The possible installation of basement draining pumps in pump sumps is taken into consideration in the shaft dimensions. One-piece compound structure made of glass fibre reinforced plastic (GRP) from a shaft pipe diameter of 1000 mm to 2900 mm, cover and base plate made of reinforced concrete. Absolute water-tightness provides for excellent suitability for further purposes e.g. as an inspection, cleaning or valve shaft. Meets all the requirements of the ATV “Sewage” regulations, which means the pre-fabricated STRATE AWALIFTSCHACHT complies in production and scope of supply completely

The end-of-line X-ray inspection system offers maximum safety. By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...

Based on multiple years of solid experience in rail vehicle construction and now also in ship construction, we offer comprehensive, engineering planning services for a variety of interior assemblies, taking into consideration various materials such as: Plastics, e.g. thermoformable materials Glass and carbon fiber reinforced plastics Solid wood and wood composite materials Glass, stone, synthetic stone (Corian) Hybrid construction of all materials in combination, as well as with stainless steel, steel, and aluminum. Our competencies in this area are governed by high customer-specific requirements and international standards. We support our customers comprehensively with preparation of the necessary documentation according to their individual requirements in the following areas: FEM verifications Weld documentation and inspection Gluing documentation Risk assessment Project documentation. Out portfolio encompasses: Partition walls

Pre-insulated Glass Fibre Reinforced (Composite) PPR Pipes

Nozzle tips for hot runner nozzles made of titanium-zirconium-molybdenum offer particularly high thermal conductivity of 140 W/mK coupled with excellent temperature and corrosion resistance. Glass fiber-reinforced plastics are exceptionally strong during processing but also highly abrasive. An optimum combination of thermal conductivity and material hardness is required. The TZM nozzle tips of Plansee are exceptionally resistant to aggression: the SHN surface hardening process. Using SHN surface hardening, we can strengthen peripheral areas and entire TZM components through the addition of a permanent, adherent diffusion layer. As a result, our customers benefit from the use of a tough, heat-resistant material with a wear-resistant surface. Surface hardening takes place during the gas phase. Coatings that we produce using the SHN process adhere better than conventional PVD or CVD layers. They perfectly replicate the surface contour of the TZM product.

Glass fiber-reinforced plastics (GRP) are among the most popular materials in the industry. Glass fibers are characterized by high mechanical strength, low weight, and resistance to external influences such as UV radiation or water and moisture. Adding glass fibers to chemically cured resins enables the production of materials with even greater strength and stiffness. Products made from glass fiber-reinforced plastics are used in various industries and can be used to manufacture both small components and large structures Offer STOLAM, a company with 40 years of experience, specializes in the production of high-quality plastic components using hand lay-up processes. Our team consists of skilled professionals who can tackle even the most challenging manufacturing demands. By partnering with us, customers can rely on professional advice and technical support at every phase of their projects. We offer a range of products to our customers, including body parts and interior

The position switches IN73 are the successful answer to an increased demand of the market. The contacts of these new series are specially designed for switching low currents. The IN73 is a hybrid because of the sophisticated fusion of metal and plastic components: All mechanically stressed components are almost completely made of metal. The lower part of the enclosure is made of glass-fibre reinforced plastic, which also makes the IN73 economically attractive. • High reliability at low currents (1 mA / 24 VDC) • Up to 4 contacts • Actuator and installation collar with mounting holes made of metal • Easy turning (8 x 45° ) and changing of the actuators without a tool • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529

Handles in various designs and dimensions: — ergonomic design and finger protection — electrostatically discharging — with/without bore and cover caps Front handle, handle, bridge handle, machine handle, comfort handle Material selection: — Plastic PA glass fibre reinforced, black — Plastic PA glass-ball reinforced, black System handle Material selection end piedes: — Plastic PA glass-ball reinforced, black Material selection tubes: — Carbon fibre, glossy finish — Aluminium, anodised — stainless steel — Steel plastik covered Strip handle Material selection handle strip: — Aluminium Material selection cover caps: — PA glass-fibre reinforced plastic Other sizes, other colors on request

Cable fixation, to secure cables to aluminum profiles different versions: Cable Binding Block univeral or with customized hammer Clip Cable Binder - 1 or 2 chambers, to fix cables without the need for cable ties, can be opened and closed again Cross Cable Binder Block, with / without Velcro (bracket), to secure cables to aluminum profilesin two directions Cross Cable Binder Block D28 for Tubular Frame Profiles, to fasten cables and tubes parallel to the slot Snap-Cable-Binding, to attach of cables securely and quick and without cable ties, with strain relief different assembly: — using a hammer head nut, screw, slot nut, etc. — with Hammer, can be mounted into the slot by a quarter turn — click-in assembly — clampable Material: PA plastic / glass fiber reinforced; Plastic PE; FPM 70; electrostatical discharging Color: black other sizes, other colors on request

System hinge for panel elements and aluminium profiles 3o and 40, with cover caps Positioning Function: to hold a door open at an angle at 85° or 175° or to keep it securely closed Adjustable friction: to hold a door open at an angle at any angle; infinitely variable from 0 - 5 Nm hinge moment; also supports lightweight doors Material: PA plastic, glass-fibre reinforced Bolt: depending on version, partly stainless steel Colour: black Fastening: From the front using M6 screws, from the back using hexagon nuts and bolts Extras: electrostatically discharging (ESD conductive), other sizes, different blades, other colours on request

To fit leveling feet to round, non-threaded tubes or to fit levelling feet to profiles at right angles Threaded plug/threaded bush: To accommodate adjustable feet on the end face of square tubes or round tubes. Threaded sleeve: To accommodate adjustable feet at right angles to the profile; a hole must be drilled with Ø 17 mm through the profile to allow application Threaded plug/sleeve: Material: : PA plastic, glass-fibre reinforced / threaded insert: nickel-plated brass Colour: black, silver Extras: conductive, other sizes, other colours on request Threaded sleeve: Material: steel Colour: silver Extras: further sizes and surfaces on request

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.