Glass lift - Import export

Comfortable Home Lifts Devas NovaLIFT is applied in buildings that are excluded from the lift shaft during the project phase, for families with small babies, elderly people with temporary chronic diseases and pregnant women who have difficulty in climbing stairs, in buildings without a shaft bottom operating at a speed of 15cm/sec. It is easily installed in new or old duplex, triplex houses and villas, office and business centres, shops and apartment spaces. With its oval structure, it is the smallest lift model especially suitable for stairwells where a home lift cannot be built.

for transporting, lifting and rotating glass panels with virtually no physical effort. Put into action in just a few seconds on site.

BD 400 is the universal portable electric lift for raising glass or windows Thanks to its unique construction, lifting loads as close as possible to a wall is also possible. It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use.

The glass lifting device is an innovative solution for unloading, loading, transport, and fitting glass. One person can transport a glass panel weighing 80 kg. The device can be easily assembled and disassembled – it only weighs 35 kg. It has large 13 inch wheels which allow it to move on uneven surfaces. The wheelbase can be adjusted, which enables it to pass through doors and move on narrow pavements.

Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.

• The leather mask is suitable for use in welding work, particulary in forced positions • The mask is made of soft cowhide • The welding glasses can be lifted up if needed • The glass holding frame is designed for removable lenses with 50mm diameter • A spring-loaded catch makes it easy to change the lenses • Also available as a version with additional neck protection

Glass Frame Transporters from 8.0 to 33.0 t HUBTEX Glass Frame Transporters are applied in the float glass industry for the transport of A- and L-stillages up to 33.0 tonnes. They are available as electrically, diesel or gas powered trucks and can be equipped with Vulkollan (PU) tires for indoor use and/or with solid rubber tires for the combined indoor and outdoor application. Glass stillages are picked up from floor level by synchronous vertical lifting of the chassis with carrying rails. The special vertical lifting movement guarantees a safe and precise lifting of glass stillages without displacement. Four hydraulic clamps hold the glass sheets in place during transport. Innovation and quality is our key to success. Since the company foundation HUBTEX has set standards with a number of developments and product improvements. The feedback of our worldwide customers is incorporated into the development and the design of new vehicles so that different market requirements can be met in the best possible manner. Model GTR 330 E/D/G, load bearing capacity 33.000 kg, electric, diesel or gas powered, equipped with Vulkollan or rubber tires, with driver's stand or closed sit down cabin for indoor and/or outdoor application

The model VQ can be used as a classic Electric Multidirectional Sideloader for placing complete packs in storage, and with vacuum suction device for picking single sheets upto 120Kg. . With the HUBTEX VQ, individual sheets are vacuum lifted of the rack location and placed onto the fork tines of the fork-lift truck until the order picking operation is finished. Afterwards the order-picked goods can be loaded directly by the fork-lift truck onto a lorry for onward shipment. Handling of glass, individual sheets up to 40 mm thick or whole glass packs up to 8000 mm long and up to 3600 mm high and with a pack thickness of up to 400 mm can be transported. Operation and use: One-man operation for warehousing and order picking of non-porous panels made of different materials and glass sheets which can be lifted using the vacuum cups Load capacity range: 3,000 to 20,000 kg Lifting height: up to 7500 mm Aisle width: Load depth or cantilever arm length plus 1600 mm (if guided: with 100 mm safety clearance per side) Order picking ratings: ca. 70 sheets/hour ca. 420 sheets/day ca. 2,100 sheets/week ca. 8,400 sheets/month On average 27 sheets are taken into consideration for one order-picking operation. Approximately 2 hours per day are taken into consideration for refilling the racks.

For lifting and manipulating up to 57 kg Simplifies lifting and carrying For lifting and moving glass or any object with flat surface. The ABS polymer used in the pump and handle makes this WPG vacuum cup lightweight, strong and rust-resistant. Inclusive carrying case.

Lift- / Lowering function Easy cleaning from inside

The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device

Glasslifter for field assembly at construction side for windows and glass Windows and glass are expensiv and damageable. AERO-LIFT has developed the CLAD-LIFT to handle glass with care and save. Four seperate vacuum circles with four vacuum pumps holds the load save even if one seal of a suction plate ist defectiv. Functionality and features Vacuum lift for glass panes weighing up to 1000 kg, with off-grid power supply. Safety is ensured during the work process by a so-called quadruple circuit system. The redundant valves, suction plates and vacuum tank are used for controlling four separate suction circuits. The four suction circuits are monitored separately by the warning system and thus ensure full load-bearing capacity even in the event of a power outage. The glass lift is able to pick up and put down the panes both vertically and horizontally. Glass panes can be turned unrestricted 360°. Thanks to the battery power supply, the vacuum lift can also be...

One person can lift windows and glass doors up to 350 with the CLAD-LIFT 350. Functionality and characteristics The CLAD-LIFT 350 is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven Clad-Lift 350 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem . The CLAD-LIFT 350 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources . Sophisticated...

The transport good can be fixed at the side and transported. For plates, glass panes, windows, doors and rear-end parts of camper. sample applications Pre-assembly of camper rear-end parts Vertical insertion of camper rear-end parts (100 kg lifting capacity). Glass lifter Typ AERO-Window Glass lifters for vertical transport of glass panes and window elements weighing up to 300kg. Glass panes can be turned +/- 90 in 45° intervals with the aid of a hand wheel.An electronic warning system with acoustic signal is used to monitor the vacuum and the power supplied to the vacuum lift.A manual sliding valve with safety interlock prevents supported window elements from being released inadvertently. to the Product page AERO window

ADVANTAGES: -fast transformation of an open summer playground into a warm winter one; -more efficient ventilation of the room while maintaining heat inside; -use of the system for effective protection against wind; - the zone of parking of shutters in the lower position forms a fence for zoning and safety; - parking of shutters in the top position frees up space for free movement; -possibility to use a choice of single tempered glass or energy-saving glass; - vertical movement of shutters by means of the electric drive; -control of systems by means of the panel, both all simultaneously, and separately.

3DMicromac’s microMIRA™ LLO system provides highly uniform, force free lift off of different layers on wafers at high processing speed. The unique line beam system is built on a highly customizable platform that can incorporate different laser sources, wavelengths and beam paths to meet each customer’s unique requirements. The laser system can be used for a variety of applications, such as GaN lift off from glass and sapphire substrates in microLED display manufacturing as well as in semiconductor manufacturing. Additional applications include laser annealing and crystallization for surface modification. Force free and extremely fast line beam laser processing No damage due to thermo-mechanical effects Low production costs Elimination of costly and polluting wet chemical processes Integration of adjacent manufacturing steps for higher fab productivity

Serie UP shower hinges by Technoglass. New design and technology. Several combinations of colors and finishes available. Flush-mounting concealed glass fixing for easier cleaning, lift system 4 mm at door opening and self closing. Adjustment of the desidered closing point system. In and outwards opening up to 90 °.