Zinc - Import export

"The zinc-nickel process has developed in recent years into a process providing one of the most efficient coatings in surface refinement, and is primarily used where high corrosion resistance at a high temperature load is required. Zinc-nickel alloys with 12-16% nickel content are very temperature-resistant, the higher level of hardness compared to the normal zinc coatings is also a very important property, since the risk of damage is lower. The process is related to the conventional alkaline zinc method, but has excellent durability even without post-treatment. This process is suitable for both barrel and rack goods."

Pediabest Zinc plus Multi is a dietary supplement to support health, wellbeing and balanced diet Zinc is a nutritional ingredient, which is essential for the proper function of the immune system; a deficiency in zinc can cause problems in growth and development, diminished ability of self-recovery from bruises, diarrhea, and result in a malfunction of the immune system.

In addition to the product range of classic cold rolling mills, we can also offer our customers electrolytically galvanized strip. The zinc coating offers excellent corrosion protection: In cooperation with our customers, we have developed a product that solves the problem of zinc abrasion in the processing of galvanized strips - ZPL (Zinc Plus Paint). An organic coating system is applied immediately after electrolytic galvanizing. This results in a colourless, uniform, highly lubricious layer with a dry film thickness of 0.50 - 3.00 µm, which can of course also be supplied in any desired colour. ZPL offers the following advantages: Further improvement of corrosion protection Excellent sliding properties, preventing zinc abrasion in the tool Reduced tool wear Longer tool life Oil-free processing is made possible Coating and printable layer with "Anti Finger Print" properties

Dr. Paul Lohmann® offers Zinc Sulfate as powder, fine powder, micronized powder, crystalls, crystalline powder in food/pharma/chem. pure grade as well as for food supplements. For pharmaceutical applications, it is used to treat zinc deficiency. For food applications, it is used for zinc fortification. For industrial applications, it is used as a source of zinc in electroplating and electronics. CAS 7446-20-0 \ 7446-19-7 EINECS 231-793-3 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

"The alkaline zinc-iron alloy coating is very commonly applied to steel and ferrous materials. It has been used successfully for many years in the automotive and electrical industries, in equipment and mechanical engineering and also in sheet metal processing. It is characterised by a higher resistance to environmental influences. In addition to the classic galvanising process, the zinc-iron process provides a high degree of corrosion protection paired with an attractive surface design (black, silver), as well as uniform coating thickness distribution. This is a crucial advantage for workpieces with fit sizes. This process is suitable for both barrel and rack goods."

"The zinc-nickel process has developed in recent years into a process providing one of the most efficient coatings in surface refinement, and is primarily used where high corrosion resistance at a high temperature load is required. Zinc-nickel alloys with 12-16% nickel content are very temperature-resistant, the higher level of hardness compared to the normal zinc coatings is also a very important property, since the risk of damage is lower. The process is related to the conventional alkaline zinc method, but has excellent durability even without post-treatment. This process is suitable for both barrel and rack goods."

Dr. Paul Lohmann® offers Zinc Bisglycinates as powder in food grade and for food supplements. Bislgycinates are fully reacted chelates. For food applications, it is used for zinc fortification. CAS 14281-83-5 EINECS 238-173-1 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

This is the parts use in priter accessories, main suopprt bracket.

This is the parts used for printer accessories.

These parts used for mechanical .

Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...

Sturdy and practical linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The linear guides with shaped raceways and the linear guides with flat raceways are available in stainless steel or galvanised or nitrided metal sheeting. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces.

steel, zinc plated*Ø 12 mm*

steel, zinc plated*threaded M 10*Ø 12 mm

screws: nickel plates brass*zinc diecasting*for rods up to 16 mm Ø

screws: nickel plated steel*zinc diecasting*for rods up to 16 mm Ø

can no longer be sold, has expired for 6 years ; Dispose of according to Castrol Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam.

"In phosphating, a phosphorus-containing crystal coating is applied to steel parts and galvanised steel parts by a chemical surface process. There are various phosphate processes, e.g., zinc phosphate, zinc calcium phosphate, iron phosphate. The coating thickness is adjustable for special customer requirements. Beim Phosphatieren steht die Verformbarkeit und die Bildung eines Haftgrundes im Vordergrund. During phosphating processes, the formability and the formation of an adhesive primer is of primary importance. The coating weight is usually in the range of 1 to 15g/m². Phosphatisations are especially resistant to lubricants such as oils or greases, and therefore well-suited to many technical applications. . Phosphate coatings are usually further coated. This involves: Oiling, soaping, lubricant coating, vulcanising and painting."

In order to be able to benefit from the excellent strength values of carbon steels in a heavily corrosive environment – in comparison with expensive stainless steels – Zinc Lamella Coating can be used. Our Zinc Lamella Coating generates the so-called cathodic protection. The more ignoble zinc “sacrifices” itself to protect the base material. Steel can be protected in this way. The layer thickness is between 10 μm and 25 μm, for specific requirements thicker layers are possible. For metric threated parts it is necessary to meet the tolerances according to ISO 965, to avoid the screw thread‘s agglutination and to keep the friction coefficients accordingly adjustable. In contrast to paints, where the danger infiltration is given, this phenomenon is prevented through the „sacrificing“ impact of zinc. In salt spray tests zinc lamella coatings achieve better results than typical galvanic zinc plating, which often only reaches 96 h to 200 h in salt spraying tests (usually according...

We offer zinc oxide In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Dr. Paul Lohmann® offers Zinc Pyrophosphate as powder, fine powder in chem. pure. For industrial applications, it is used as a "white" solid lubricant. CAS 7446-26-6 (anh.) EINECS 231-203-4 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc Gluconate as powder, fine granules in pharma grade as well as for food supplements. For pharmaceutical applications, it is used to treat zinc deficiency. For food applications, it is used for zinc fortification. CAS 4468-02-4 (anh.) EINECS 224-736-9 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc Malate as fine powder for food supplements. For food applications, it is used for zinc fortification. CAS 2847-05-4 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc L-Ascorbate as powder in chem. pure as well as for food supplements. For food applications, it is used for zinc fortification. CAS 151728-40-4 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc Citrate 3-hydrate as powder, fine powder, micronized powder in food/chem. pure grade as well as for food supplements. For food applications it is used for zinc fortification. CAS 546-46-3 (anh.) EINECS 208-901-2 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Dr. Paul Lohmann® offers Zinc Peroxide as powder in chem. pure. For industrial applications, it is used as a source of peroxide for odor control or as a crosslinker for rubber. Advantage is to be a solid but active "hydrogen peroxide". CAS 1314-22-3 EINECS 215-226-7 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting

Key chain with hook and key ring