Wood screws - Import export

Mobile workbench 1x hinged door, 2x screwed wooden shelves, grip handle 2x wheels and 2x castor wheels with locking device Ø 200 mm WxDxH 1200 x 600 x 820 mm

Coating of threads with galvanized surfaces, e.g. screws for flakeboards to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral Forms a colorless, adhesive and tack-free sliding film after drying. With an inhibitor, which prevents from corrosion during the drying

polybag-set no. 3 hex head wood screws

For installation of pipe clamps with excellent optical characteristics Suitable for installation on walls, carports, winter gardens and dormers of roofs Can be used on concrete, wood, plastic and sheet metal surfaces Can be fixed with wood screws, screws for sheet metal or blind rivets Available surface: Zinc plated We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering

This anchorage point (Ø 16 mm) has been awarded national technical approval ("abZ"). It is equipped with a base plate (200 x 200 mm) and is screwed straight onto the wooden panelling. Our standard package includes 16 high-quality screws which - like the whole system - are manufactured from weather-resistant stainless steel material. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 National technical approval (“abZ”): OSB ≥ 22 mm, or similar, e.g. tongue and groove boards or glulam planks EN 795: Wood ≥ 24 mm, OSB ≥ 18 mm Optionally, the device can be installed using an additional 12 mm OSB board: Wood ≥ 20 mm, OSB ≥ 12 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

The round base plate (Ø 400 mm) of this stainless steel anchorage point (Ø 16 mm) guarantees that any force exerted on it is optimally distributed across a thin installation surface. Our standard package includes 24 stainless screws which are used to attach the device to an OSB / wooden surface. EN 795:2012, A + CEN/TS 16415:2013 OSB min. 12 mm Wood min. 18 mm Can also be installed on a vapour barrier or waterproofing (max. 15 mm) Optimal force distribution through the round base plate design Incl. installation set

The two sides of this stainless steel anchorage point (Ø 16 mm) - specially designed for the roof apex - can be adjusted to the individual pitch of your roof using its adjustable base plate. Our standard package includes 8 stainless steel screws for attaching the device to the rafters. EN 795:2012, A + CEN/TS 16415:2017 Simply screwed onto the roof apex Suitable for usage on both sides of your roof Min. roof rafter dimensions: 80 mm x 120 mm Add a supporting tube for usage as an end or corner post in a lifeline system Incl. installation set

Once attached to a beam using the 2 long screws provided - with the 14 smaller ones screwed straight into the wooden panelling - this stainless steel anchorage point (Ø 16 mm) and its base plate (200 x 200 mm) reliably protect roof workers & Co. from falling. This device was awarded national technical approval by the German Institute for Construction Technology (DIBt). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 abZ: Wood min. 24mm EN 795: Wood min. 24mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

This anchorage point (Ø 16 mm) and its base plate (100 x 100 mm) are manufactured completely from stainless steel. The device is simply screwed permanently onto a wooden beam. It is available in different lengths and comes with the 4 stainless steel screws required for installation. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Min. beam dimensions: 100 mm x 120 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

The thread of this no-nonsense stainless steel anchorage point (Ø 16 mm) is screwed straight through the wooden panelling into the beam. Simply drill a hole through the panelling (at least 18 mm) and into a load-bearing wooden beam (min. 80 mm x 120 mm). EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 80 mm x 120 mm Depth of wooden panelling: ≥ 18mm

This stainless steel anchorage point is equipped with a wavy aluminium base plate which fits snugly to the waves of a fibre cement roof (wave distance 177 mm). The anchor device is simply screwed onto a wooden beam using the screws provided. EN 795:2012, A + CEN/TS 16415:2013 Special wave design, e.g. for Eternit and similar roof systems Developed for load-bearing wooden structures Simply screw it onto one single wooden beam Min. beam dimensions: 100 x 120 mm

Simply install this stainless steel anchorage point - which includes a welded-on supporting tube (Ø 42 mm) - on a pitched roof surface. The flexible crossbar, which is screwed onto a wooden beam, allows you to adjust it according to the roof pitch. It is installed using the 4 stainless steel screws supplied and then sealed up using a standard antenna tile. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 60 mm x 120 mm Adjustable angle and crossbar position Installation materials included

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

Thanks to its elongated aluminium base plate, this stainless steel anchorage device can be installed on a fibre cement roof (wave distance 177 mm), if the roof beams measure at least 60 x 120 mm. The device is attached to 2 beams. The base plate, which is 125 cm long when delivered, can be shortened onsite, if required. EN 795:2012, A + CEN/TS 16415:2013 Special wave design, e.g. for Eternit and similar roof systems Designed for load-bearing wooden structures Simply screwed onto two adjacent beams Min. beam dimensions: 60 x 120 mm

This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)

Characteristics, Function The newly developed “EcoDrain Unit” allows the dewatering degree of wood chips in the plug screw to be increased. A newly designed dewatering zone allows for easy exchange of the wear parts. Advantages Payback after approx. 6 months All plug screw assemblies retrofittable Increased dewatering of the wood chips Energy savings in downstream processes Simple wear part exchange Low maintenance costs due to exchangeable wear parts

Screw conveyors primarily comprise a U-shaped trough and the worm shaft with blades. They are primarily used for internal transportation of bulk goods (filter cake, pellets, wood). Our standard screw conveyors are manufactured with pedestal bearings and gland seals. The construction forms for material transport can be selected with a pitch of between 0° and 90°. The construction length can be varied depending on requirements. The materials for the screw conveyors can be supplied in normal steel and wear-resistant steel; plastic panels are also possible.