Wood design - Import export

With the modular set in a simple wooden design, every buffet appears attractively structured and tidy. Whether for breakfast, lunch or evening buffets, the cooling plate can be loaded with cold cuts, cheese, fish or fruit, for example, and can also be easily replaced or refilled.

In addition to the furniture industry, we also supply wood designer pieces to shopfitters, the commercial construction industry, shipbuilders and large interior finishers. We also make custom pieces such as premiumquality wooden lamps or vases to give you tailored solutions that match your specific requirements.

With the modular set in a simple wooden design, every buffet appears attractively structured and tidy. Whether for breakfast, lunch or evening buffets, the 6 glass bowls can be filled with yoghurt or quark dishes, salads or desserts, for example, and can also be easily exchanged or refilled.

Our product is a handcrafted table made of solid chestnut wood. The product dimensions are 270cm length, 62-80cm width and 77cm height. The design preserves the natural shape of the tree and consists of a one-piece chestnut trunk. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 230 cm long, 52-88 cm wide and 76 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 227 cm long, 51-90 cm wide and 75 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 235 cm long, 52-104 cm wide and 76 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 260 cm long, 51-92 cm wide and 78 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 261 cm long, 45-75 cm wide and 78 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 237 cm long, 62-101 cm wide and 75 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Our product is a handcrafted table made of solid walnut wood. The product dimensions are 191 cm long, 47-80 cm wide and 76 cm high. The design preserves the tree's natural shape and is made from a single piece of walnut trunk. Therefore every table is unique. The table legs are also made of the same wood and have a special design.

Suitable for any kind of wood used outdoors, even plastic furniture and some stone types. Garden Wood Cleaner is designed to remove atmospheric pollution, algae, graying, grease and oil even in fluting and hard to reach nooks and crannies.

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

This stainless steel anchorage point (Ø 16 mm) - specially designed for wooden surfaces - is attached to a load-bearing beam and accordingly countered. The anchor can be installed laterally using the angular plate supplied. Our standard package also includes 2 threaded bolts and matching nuts. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation 2-hole system for flexible installation For load-bearing wooden structures Minimum beam dimensions: 100 mm x 120 mm Incl. stainless steel installation set

The round base plate (Ø 400 mm) of this stainless steel anchorage point (Ø 16 mm) guarantees that any force exerted on it is optimally distributed across a thin installation surface. Our standard package includes 24 stainless screws which are used to attach the device to an OSB / wooden surface. EN 795:2012, A + CEN/TS 16415:2013 OSB min. 12 mm Wood min. 18 mm Can also be installed on a vapour barrier or waterproofing (max. 15 mm) Optimal force distribution through the round base plate design Incl. installation set

The two sides of this stainless steel anchorage point (Ø 16 mm) - specially designed for the roof apex - can be adjusted to the individual pitch of your roof using its adjustable base plate. Our standard package includes 8 stainless steel screws for attaching the device to the rafters. EN 795:2012, A + CEN/TS 16415:2017 Simply screwed onto the roof apex Suitable for usage on both sides of your roof Min. roof rafter dimensions: 80 mm x 120 mm Add a supporting tube for usage as an end or corner post in a lifeline system Incl. installation set

For a high load-bearing capacity in any direction, simply insert this stainless steel anchorage point (Ø 16 mm) through a pre-drilled hole in a wooden beam and counter it on the other side. This anchor is available with and without a protrusion and can be installed on the ground, laterally or overhead. EN 795:2012, A + EN CEN/TS 16415:2013 Protruding and non-protruding models available Designed for load-bearing wooden structures Minimum rafter dimensions: 100 mm x 120 mm Incl. installation set

Once attached to a beam using the 2 long screws provided - with the 14 smaller ones screwed straight into the wooden panelling - this stainless steel anchorage point (Ø 16 mm) and its base plate (200 x 200 mm) reliably protect roof workers & Co. from falling. This device was awarded national technical approval by the German Institute for Construction Technology (DIBt). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 abZ: Wood min. 24mm EN 795: Wood min. 24mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

The thread of this no-nonsense stainless steel anchorage point (Ø 16 mm) is screwed straight through the wooden panelling into the beam. Simply drill a hole through the panelling (at least 18 mm) and into a load-bearing wooden beam (min. 80 mm x 120 mm). EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 80 mm x 120 mm Depth of wooden panelling: ≥ 18mm

Simply clamp this stainless steel anchorage point (Ø 16 mm) onto a beam (max. 150 mm) using its base and counter plates. Do the dimensions of your beam differ? Upon request, we can also supply anchors with national technical approval in custom sizes. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a wooden beam using a base and counter plate (max. girder width: 150 mm) Add a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set Available for other beam sizes upon request

This anchorage point (Ø 16 mm) has been awarded national technical approval ("abZ"). It is equipped with a base plate (200 x 200 mm) and is screwed straight onto the wooden panelling. Our standard package includes 16 high-quality screws which - like the whole system - are manufactured from weather-resistant stainless steel material. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 National technical approval (“abZ”): OSB ≥ 22 mm, or similar, e.g. tongue and groove boards or glulam planks EN 795: Wood ≥ 24 mm, OSB ≥ 18 mm Optionally, the device can be installed using an additional 12 mm OSB board: Wood ≥ 20 mm, OSB ≥ 12 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

The rotor debarker is ideal for use wherever reliably and thoroughly debarked logs are required. The abrasive debarking tools make the rotor debarker the rst choice for logs that are especially hard to debark and for frozen wood. The narrow design ensures the parallel position of the logs in the machine. The modular design allows high exibility for a needs-based log feed. Key features Modular design Needs-based conguration according to throughput amount, type of wood, and degree of debarking Debarking by means of abrasive and wear-resistant debarking tools Advantages Adjustable degree of debarking Suitable for frozen logs (permafrost) Suitable for logs with dierent diameters Quiet operation Options 2 or 3 rotors per section

The rotor debarker is ideal for use wherever reliably and thoroughly debarked logs are required. The abrasive debarking tools make the rotor debarker the first choice for logs that are especially hard to debark and for frozen wood. The narrow design ensures the parallel position of the logs in the machine. The modular design allows high flexibility for a needs-based log feed. Features, Function Modular design Needs-based configuration according to throughput amount, type of wood, and degree of debarking Debarking by means of abrasive and wear-resistant debarking tools Advantages Adjustable degree of debarking Suitable for frozen logs (permafrost) Suitable for logs with different diameters Quiet operation Options 2 or 3 rotors per section

The rotor debarker is ideal for use wherever reliably and thoroughly debarked logs are required. The abrasive debarking tools make the rotor debarker the first choice for logs that are especially hard to debark and for frozen wood. The narrow design ensures the parallel position of the logs in the machine. The modular design allows high flexibility for a needs-based log feed. Features, Function Modular design Needs-based configuration according to throughput amount, type of wood, and degree of debarking Debarking by means of abrasive and wear-resistant debarking tools Advantages Adjustable degree of debarking Suitable for frozen logs (permafrost) Suitable for logs with different diameters Quiet operation Options 2 or 3 rotors per section

Müllers pallet transfer systems and units are available in several types for different applications. Among others we offer automatic feeders for conveying, transfer systems with gate for a process flow in both directions, transfer units with adjustable side walls or fixed side walls. with fixed side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets; fixed side walls with motorized adjustable side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets motorized side walls with manually adjustable side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets manually adjustable side walls with gate for flow in both directions Standard pallet transfer unit Type PW 1000 D2 Loads up to 1000 kg Design: for wooden one-way and aluminum pallets motorized side and end walls automatic sequence Automatic feeder for conveying...