Ventilation - Import export

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 10 mm (push-in silencer) Ø mm: 15.5 +- 0.5 mm Length of sintered body with collar: 31 +-1.5 mm Total length including thread: 57.5 +3 mm

68% cotton, 20% polyamide, 10% polyester, 2% elasthane. Specifically developed for athlets (particulary for runners and bikers). Great ventilation by special net-knitting-technique at the back of the feed - allows them to breath! Anatomical rib-knit for perfect fit. With high-quality, traditionally hand linked seams - protects the sensitive toe area. Antibacterially equipped to help avoid athlet's feed and unpleasant smells. 3-pack (one color).  Great price performance ratio! Sizes: 35-38, 39-42, 43-46, 47-50  Colors: black, white (1 color/3-pack) 

Water Separator WA Connect. G1/2 ... G11/2 application with wet or moist surfaces

Ventilation Filter BF Connect. G1/2 ... G11/2 ventilation filter for installation on vacuum valves on the ventilation side

Vacuum Filter VFI Connect. Schlauch-Ø 4 .. 6 inline vacuum filter for direct installation on hose lines

Vacuum Filter VFT Connect. G1/8 ... G1/2 Vacuum filter made of plastic with clear glass lid for ejctors and small vacuum pumps

Vacuum Filter SFS Connect. Hose-Ø 50 ... 60 Vacuum filter with plastic housing for vacuum blower with high flow rate

Vacuum Filter VF Connect. G3/8 ... G21/2 Vacuum filter with sheet metal housing for vacuum pumps and smaller blowers

Ventilation Filter BFS Connect. G1/8 ... G1 ventilation filter for installation on vacuum valves on the ventilation side

Ventilation fans made of plastic and die-cast aluminium are available with keyway or with clamping device .

Unidirectional ventilation fans with a diameter of 250 mm to 2745 mm. Pinhole to be made according to customer´s requirements. Ventilation fans available in either glass-fibre reinforced plastic or aluminium; application temperature – 40 °C to 110 °C and up to 150 °C with aluminium (245°C *).

The main characteristics of the forced ventilation unit are short assembling measures. The ventilations are static and dynamically balanced, thus, of a high balance quality. The diameter, the length as well as the side punchings can be made to customer´s requirements.

This forced ventilation series offers a wide voltage range of 400 to 575 Volt three-phase in IP 66 Made in Europe. Forced vent. - Motor optionally available in three versions. Mb 1F for standard forced ventilation with drive motor in aluminium, in IP66, insul. Class F. Mb 1G for all special versions, drive motor in cast iron, IP66. Special versions further available in insul. Class H, IP67, special voltage etc. Mb 1H with UL/CSA certified drive motor in aluminium, IP66, insul. Class F.

Forced Ventilation Units Forced Ventilation Units type MW in IP 66 with axial ventilation fan to ensure a low run at a simultaneously higher output. These units can be operated at a higher ambient temperature of max. 60 °C.

This forced ventilation series offers a wide voltage range of 220 to 275 (+-5%) Volt single-phase respectively 380 to 480 (+-5%)Volt three-phase in protection class IP 66 The very high stiffness and stability in connection with our flexible assembly possibilities for the extensions and the wide electric field of application offers you a cost-effective, technically high-quality solution for your motors .

With a size of 400 x 200 x 600 mm is the AP07A the smallest module from our company. It draws air on both sides and blows it out on top of the device to the room. The 7-stage filtration passes through a pre-filter, catalyst filter, formaldehyde filter, activated carbon filter, HEPA filter, sterilizing UV light and an anion purifier. It can clean the air from virus, bacteria, pollen, and all other harmful particles in air, and also can reduce the odor in air at the same time. The AP07A is designed for a room size of approximate 45 m². Description Product NameAP07A Air purifier Voltage220 V- 240 V, 50 Hz Power30 W – 85 W CADR (Clean Air Delivered Rate)350 m3 / h Weight9,8 kg Product Size400 x 200 x 600 mm Filter1. Vorfilter 2. Katalysatorfilter 3. HEPA Filter Main FunctionAir filtering, Sterilization with UV Light, Anion release The CADR value of AP07A reaches 355 m3 / h, and has a Formaldehyde CADR 81.5 m3 / h. AP07A has a light senser function build-in the device.

With its modern design and effective filter function, the Air Protector One is designed specifically for large rooms. It features a touchscreen, and a companion app, which can be used for controlling and pre-programming. Description Product NameAir Protector One Voltage220 V – 240 V, 50 Hz Power30 W – 85 W CADR (Clean Air Delivered Rate)800 m3 / h Weight14 kg Product Size400 x 400 x 669 mm Filter1. Pre-filter 2. HEPA 14 filter 3. (activated)Carbon filter Main FunctionAir filtering, Anion release The Air Protector One air purifier filters the air by drawing air into the unit from two sides via an integrated fan. Then the filtered air flows back into the room from above to achieve optimal circulation. Air Protector One uses 4-stage filtration including HEPA 14 double filter on two sides and captures all particles larger than 3 nm from the air with an efficiency of 99.995%.