Sound protection - Import export

Door seals, Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive, save energy, draft excluder ideal as sound insulation, cold protection door seals Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive (save energy - quick and easy to install) door draft excluder ideal also as Sound insulation, information about this article IDEAL PROTECTION FROM DRAFT - Our door seals are perfect as draft stoppers. The Vellure door draft excluder / door strip is self-adhesive. The problem with drafts is now history forever. SAVE ENERGY - Our draft excluders and door seals are perfect as cold stoppers and effectively eliminate thermal bridges, saving you money. The draft excluder for doors is also ideal as sound insulation! INSTALLED IN UNDER 1 MINUTE - Simply clean the surface of the door, peel off the adhesive strip and stick the door seal at the bottom. If necessary, simply

Seals, Vellure® door seal draft excluder for doors - NEW premium door seal self-adhesive (energy saving door draft excluder ideal as sound insulation, cold protection (white) seals, IDEAL PROTECTION FROM DRAFTS - Our door seals are perfect as draft excluders. The door draft excluder / door strip from Vellure is self-adhesive. The problem with drafts is now history forever. SAVE ENERGY - Our draft excluders and door seals are perfect as cold stoppers and effectively eliminate thermal bridges, so you save money. The draft excluder for doors is also ideal as sound insulation! IN UNDER 1 . MINUTE ATTACHED - Simply clean the surface of the door, peel off the adhesive strip and stick the door seal on the bottom. Simply cut off the protruding door seal if necessary. Quick & easy! PERFECT FOR ANY SURFACE - Our special adhesive is suitable for any surface. The advantages are the bombproof hold & easy to remove again as needed. In addition, the draft stopper for doors is very gentle

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

germanLine® Beige 35 with CN Layer Applications: germanLine® Beige 35 with CN layer protects surfaces against wet wear and round grain as well as fine-grained, sharp or hard conveyor goods or slurries, such as wet grit. Our product is used in granulation drums, bunkers, skids or slides, pumps, skirts, chutes, silos etc. and serves as wear protection, shock absorber, sound insulation, protection against corrosion and caking. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: beige Density: 1.0 ± 0.03 g/cm³ Hardness: 35 ± 5 ° Shore A Tensile strength: ≥ 19 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 95 mm³ at 5 N Breaking force: ≥ 50 N/mm Downloads: Technical Data Sheet germanLine® Beige 35 with CN Layer - Englisch [PDF]