Screw it - Import export

Ground anchors, ground screws or screw anchors are used in various applications, such as: Stable earth screw foundation: Perfect solution for garden sheds, gazebos, greenhouses, patios and carports, for permanent or temporary applications (reusable, as long as not damaged), can be loaded immediately even in winter Bracing of poles: Ground anchors are used to securely anchor masts to the ground and to absorb tensile forces. This is particularly important in situations where where high stability and safety are required, for example installation of antenna masts or for temporary constructions constructions such as event stages. Recovery of vehicles: Ground anchors can be used as anchor points to secure vehicles during recovery or rescue operations. rescue operations. They provide a reliable anchorage in the ground to absorb tractive forces and allow safe towing or towing or moving vehicles off-road.

round bolts are a reliable and easy-to-install ground anchoring solution is indispensable in many situations, be it for the secure fastening of tents, scaffolding, posts, pavilions or for construction fences in the ground. Just pre-drill, screw in, done!

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and duplicate acceptances (eg works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

During re-machining, a cutting tool is used to remove material from a workpiece in order to shape or surface it as required. We offer re-machining (turning, twisting) as wage work. The following machining operations we offer: Turn thin stem, pins and tips Screw punctures, approaches and undercuts Heads of screws / cold shaped parts machining process (turning) further machining operations are possible on request. Our curve-controlled automatic Audrema lathes offer you further possibilities of finishing cold-moulded parts. These automatic lathes are designed to achieve maximum precision and reproducibility at high throughputs. Short loading and unloading times permit economical production of medium-sized and large series.

With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

Throttle valves, check valves, quick exhaust valves, manual slide valves

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

Hose connectors and pipe connectors are used where permanent and fixed connections are required. They are used for extending, diverting or repairing lines and guarantee a tight connection. Here you will find quick-connect fittings, quick screw fittings, hose screwed fittings, hose connection parts and cutting ring fittings. All mentioned hose and pipe connectors are available in various sizes, materials, and pressure and temperature ranges.

drylin® SAW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, Trapezoidal lead screw TR10x2, machined lead screw end 69x15mm, guide carriage, aluminium shaft end support. Stroke length: 500mm, carriage length: 69mm, NEMA23 stepper motor with JST connector. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SLW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, ball bearing Trapezoidal lead screw TR10x2 made of stainless steel, lead screw end machined 6h9x17mm, guide carriage in 100mm length, shaft end support made of anodised aluminium. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

News 2014 Lubrication-free drylin® screw drives: larger and high resilience, new sizes and many more… All News and line extensions Application examples Be inspired by our lead screw unit application examples. drylin® lead screw units - application examples 3D-CAD Faster and simpler designing with file formats for various systems. 3D-CAD Online-Shop Inform, select and order online. Information about drylin® screw drives, quick selection and order. Delivery in 24 h or today* DryLin® screw drives Find them quick with selection aids The product finder and the service life calculation offer you the possibility to find the suitable drylin® screw drives quickly. Product finder and lifetime calculation for screw drives Special dimensions Configurator for leadscrew nuts and -spindles for special dimensions. Screw drives special dimensions Classic format adjustments and lifting applications can be implemented with the self-locking trapezoidal thread. Quick adjustments or handling utilize the high ratio of the steep thread. In addition to steel, all spindles are available in stainless steel and thus provide a corrosion-resistant solution in combination with drylin® threaded nuts made of iglidur® plastics. Advantages: Maintenance-free, dry operation Low noise Insensitive to dirt and dust XYZKorrosionsfrei Trapezoidal thread and high helix thread High efficiency Anti-backlash function available FDA certification available Screw drives are machine elements that convert a rotary motion into a translational motion. drylin® screw drives are always based on self- lubricating plastic nuts and thus enable a life-long operation without external lubrication. The spindle (trapezoidal thread or steep thread) remains in dry operation, providing many technical advantages. For example, dirt does not stick to lubricants. The screw drive can thus be used on the one hand in applications with extreme dirt accumulation and on the other in the hygiene sector. Different thread types cover a wide range of applications. drylin® - Trapezoidal leadscrew nut - Technical data Classic format adjustments and lifting applications can be implemented with the self-locking trapezoidal thread. Quick adjustments or handling utilize the high ratio of the steep thread. In addition to steel, all spindles are available in stainless steel and thus provide a corrosion-resistant solution in combination with drylin® threaded nuts made of iglidur® plastics. Advantages: Maintenance-free, dry operation Low noise Insensitive to dirt and dust XYZKorrosionsfrei Trapezoidal thread and high helix thread High efficiency Anti-backlash function available FDA certification available drylin® screw drives: Efficiency measurement News 2014 Lubrication-free drylin® screw drives: larger and high resilience, new sizes and many more… All News and line extensions Application examples Be inspired by our lead screw unit application examples. drylin® lead screw units - application examples 3D-CAD Faster and simpler designing with file formats for various systems. 3D-CAD Online-Shop Inform, select and order online. Information about drylin® screw drives, quick selection and order. Delivery in 24 h or today* DryLin® screw drives Find them quick with selection aids The product finder and the service life calculation offer you the possibility to find the suitable drylin® screw drives quickly. Product finder and lifetime calculation for screw drives Special dimensions Configurator for leadscrew nuts and -spindles for special dimensions. Screw drives special dimensions

EBS-plug 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Plug / EBS with screw-contacts Product number supplier 777558

EBS-plug 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Plug / EBS with screw-contacts Product number supplier 777558

EBS-socket 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Sockets / EBS with screw-contacts Product number supplier 777559

EBS-socket 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Sockets / EBS with screw-contacts Product number supplier 777559

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Turned connecting elements, reducers, nipples, sleeves, grommets, plugs, plugs made of steel, aluminium, brass, stainless steel Blank, anodised, nickel-plated, chrome-plated, galvanized.

Self-adhesive round hole covers made of self-adhesive plastic foil according to individual PANTONE, RAL or CMYK colour code with a diameter of 10 mm, 15 mm, 20 mm, 25 mm, 50 mm or custom sizes. 500 pieces minium order.

Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.

Countersunk screws - metal ~DIN 963 (~DIN EN ISO 2009) Material: machining steel 4.8 zinc-plated

Countersunk screws - metal ~DIN 963 (~DIN EN ISO 2009) Material: stainless steel A2

Hexagon head screws - metal ~DIN 933 (~DIN EN ISO 4017, threaded to head) Material: machining steel 4.8 zinc-plated