Results for
WIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® DP-EU pressure blasting cabinets clean and process tools and parts in just a few seconds. Fine blasting granulates are shot onto the surface by means of compressed air and remove dirt and corrosion. The blasting nozzle is manually guided during the processing of individual parts. Process automation is also possible. For this purpose, the workpiece or the blasting nozzle is moved by motor. The pressure blasting process is suitable for the removal of all solid, exposed residues and layers, especially on metallic surfaces of production tools and high-quality machine parts. Deburring and finishing of surfaces is also possible. In extensive tests with your tools you can convince yourself of the economic efficiency of our system. We will provide you with a test facility for this purpose after consultation.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® DI-EU injector blasting cabinets are designed for use in production and maintenance. Ready for use equipped with integrated cartridge filter and abrasive recovery system. Economical operation with fine-grained abrasives with low air consumption of approx. 800 l/min. at 6 bar blasting pressure. The blasting media is continuously sucked out of the cabinet by a constant negative pressure and separated from dirt and dust in a downstream cyclone. A cyclone screen (possibly with ring magnet) collects coarse impurities. In this way, only clean abrasive remains in circulation. The used abrasive, dust and small impurities are led through the cartridge filter chamber to the dust collecting bucket.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® DP-BB blast cabinets with combined blasting and blow-off function (Blast´n´blow®) and ex-protection accord. to 1999/92/EC for paint stripping and surface decoating in seconds. Fine organic blasting media get shot onto the workpiece by compressed air, whereby even stubborn thick layers are loosened in shortest time by the effect of the soft, but sharp-edged granulates. Even sensitive tool surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
WIWOX GMBH SURFACE SYSTEMS
Germany
If the service is right, every production plant will work economically for many years. We offer you a qualified repair and maintenance service, even for older machines and third-party products. Our service technicians will look after you quickly and anywhere with fully equipped vehicles. We pay attention to the good training of our personnel. Experienced mechanics, locksmiths or electronics specialists offer you every support to ensure the perfect functioning of the delivered systems. Our plant service – also for older machines and other manufactures!
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
Fast delivery of spare and wear parts We have a modern shelf stock of all common wear and spare parts. The delivery guarantee from our own stock is a matter of course for us - as well as for older machines and third-party products. ▪ Blasting gloves/sandblasting gloves ▪ Blasting nozzles/sandblasting nozzles ▪ Clamps ▪ Vent valves ▪ Laminated glass panes ▪ Profile seals ▪ Illumination panes ▪ Filter cartridges ▪ Replacement diaphragms ▪ Sealing rings ▪ Nozzle holder ▪ Blasting hoses/sandblasting hoses ▪ Door seals ▪ Air nozzles ▪ Check valves ▪ Sinter filters ▪ Metering rings ▪ baffle discs and much more.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® CORUS HD ultrasonic systems have been specially designed for cleaning high-quality moulds and precision tools. In maintenance these replace the labour-intensive and often ineffective manual cleaning. The ultrasonic cleaning process can be used for all metal moulds, in particular tools for injection moulding, extrusion, rubber processing as well as aluminium and gravity die casting. A typical structure consists of three stages: 1. cleaning, 2. rinsing and 3. passivating. The usable dimensions are matched to common mould sizes. The workpieces to be washed are placed in the tank either with the aid of a washing basket or with a lifting beam. Our ErgoStation is recommended for manual rinsing, drying and post-treatment. The working area is completely enclosed, brightly illuminated and ventilated. Operation is safe and simple, as the moulded parts are loaded laterally through a sliding door and held by a lifting device during treatment.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
The WIWOX® VERSA GENIUS+ ultrasonic cleaning system enables individual, demand-oriented mould and parts cleaning. The modular design allows adaptation to almost all process requirements. Later expansion or automation is possible at any time. WIWOX® VERSA GENIUS+ ultrasonic cleaning systems consist of washing, jet, rinsing and drying modules as well as the corresponding accessories. The spectrum ranges from individually operated cleaning basins to fully automated, multi-stage cleaning lines. WIWOX® VERSA GENIUS+ sets new standards in modern plant design. Well thought-out details in the area of guiding the cleaning medium, agitation and process control ensure a flexible and energy-efficient process sequence that meets the requirements. You can convince yourself of the economic efficiency of the system by extensive cleaning tests in our test laboratory. The bath care accessories also play an important role in the cleaning result, the uniform process flow and the operating costs.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
The WIWOX® USm Ultrasonic cleaning tanks enable individual, demand-oriented surface treatment in a single or multi-stage process. The modular design allows adaptation to almost all requirements and subsequent expansion or automation is possible at any time. Aqueous cleaning at temperatures between 60° and 80° C ensures absolute degreasing and particle removal. Organic or inorganic residues such as polishing paste, paint, plastic, release agents, oil carbon or lime can be easily removed by using the right cleaner. The workpieces are cleaned within a few minutes. The cleaning result is always perfect and reproducible. The subsequent rinsing process is followed by stain-free post-cleaning or preservation. The WIWOX® ultrasonic cleaning process can be used for all steel moulds as well as brass and copper parts. Especially tools for injection moulding, extrusion, rubber processing, aluminium die casting and gravity die casting.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® PYRO paint stripping and decoating oven for particularly large and heavy batches. Particularly powerful furnace technology for the highest demands. With state-of-the-art IPC control and industrial burner technology. This furnace series enables clean, reproducible process parameters as well as state-of-the-art exhaust gas treatment.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
Thermal cleaning in the WIWOX® IGS thermal system at up to 500° C removes all organic residues, even from fine bores. Depending on the melting and decomposition point of the residues, they are either melted or pyrolysed. The resulting exhaust air during the carbonization phase is burned in the afterburner chamber at over 850° C. Cleaning in the pyrolysis process requires subsequent post-cleaning. Inorganic components, oxidation residues, corrosion, etc. remain on the tool surface and must be removed. The ultrasonic process with acidic or alkaline cleaning media or the blasting process with organic and mineral abrasives are suitable for this purpose.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.
Request for a quoteResults for
Sandblasting equipment - Import exportNumber of results
15 ProductsCompany type
Category