Results for
CIC - KLAUS CZERWONKA
Germany
Turned spindles, axles, shafts. Pistons for pneumatics, hydraulics, pumps. Ground, hardened, polished, chrome-plated.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.
Request for a quoteIGUS® GMBH
Germany
When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Before: with piston rings: Why complicate things when it can be done differently? Replace elaborately stamped PTFE tapes with a single clip-on guide ring, such as in lifting elements, control valves and fittings. We offer iglidur® piston rings made of freely selectable materials for a wide range of applications. Special properties Easy to assemble Low-priced More wear-resistant than PTFE-bonds Higher load capacity Defined dimensions different materials per ex. iglidur® J, J350… iglidur® piston rings - application examples When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Installation recommendations pistons installation recommendations for housings Installation recommendations for housings Dimensions [mm] dS (h-tolerant) [mm] dG (h-tolerant) [mm] bg [mm] Nominal diameters dS = d1 dG = d2 bG = b1 +0,2 Installation recommendations for pistons Dimensions [mm] dG (h-tolerant) [mm] dH (h-tolerant) [mm] bg [mm] Nominal diameters dG = d1 dH = d2 bG = b1 +0,2 b1: Desired length Inner and outer Ø (d1 and d2) made using standard plain bearings* M for metric PRfor piston ring iglidur® desired material
Request for a quoteC+R HYDRAULICS GMBH
Germany
DIN 2391, EN 10305-1, E355+N(SR), hard chrome-plated outside 25 +/-5 µm, fit f7 Dimensional range: Outer diameter 12,0 - 140 mm
Request for a quoteC+R HYDRAULICS GMBH
Germany
Chrome coating at least 2 x 20 µm, 20MnV6, fit f7, Corrosion resistance at least 500 hours ISO 9227-NSS, Rating 9 - ISO 10298 Material Dimension range 20MnV6 20,0 - 100 mm
Request for a quoteC+R HYDRAULICS GMBH
Germany
Material Dimension range CK45 4,0 - 250 mm 20MnV6 8,0 - 200 mm 42CrMo4V 18,0 - 140 mm 1.4057 20,0 - 140 mm
Request for a quoteC+R HYDRAULICS GMBH
Germany
Material Dimension range CK45 10,0 - 140 mm 42CrMo4V 16,0 - 180 mm
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Assembly immediately upon receipt of order - generally in stock Category Hydraulic systems, valves and components / Hydraulic systems for commercial vehicles / Hydraulic sets / Piston pump sets Product number supplier 456001
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatic special cylinder in tandem design with two separately controllable chambers and different strokes. Piston rods with anti-twist protection. Complete with connection elements for free suspension according to customer specifications.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The CZ series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with weight-optimized lightweight profile tube including practical slot for position sensors.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The CY series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with robust and aesthetic profile tube.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
C+R HYDRAULICS GMBH
Germany
Of base material 280X equal 20MNV6, fit f7, with 30 µm Nickel + 20 µm chrome coating Material Dimension range NIKROM 350 20 - 140 mm
Request for a quoteC+R HYDRAULICS GMBH
Germany
Chrome coating at least 20 µm, fit f7, Hardness of chrome coating (HV 0,1 / HV 850-1100) 500 hours in NSS test, rating 10 Material Dimension range INFINITY 20,0 - 120 mm
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: MLM 1 Manufacturer: Lewa Description: Membrane Piston Pumps
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: RM25 PEE Manufacturer: Reko-Flux Description: Membrane Piston Pumps
Request for a quoteCENTRIMAX - WINKELHORST TRENNTECHNIK GMBH
Germany
Type: RM15 PVV Manufacturer: Reko-Flux Description: Membrane Piston Pumps
Request for a quoteResults for
Pistons - Import exportNumber of results
26 ProductsCountries
Company type