Material fur - Import export

Graphene is a ground-breaking material that is revolutionising a wide range of industries thanks to its unique physical properties. Consisting of a single layer of carbon atoms, this material is characterised by its exceptional strength (200 times stronger than steel), lightness, chemical resistance, electrical conductivity and thermal conductivity. The graphene material is certified as completely safe, skin-friendly, non-toxic and non-cytotoxic.

iglidur® X6: nano material The lifetime is up to six times longer than iglidur® J Thanks to nano-technology, iglidur® X6 has a service life of up to six times longer than the heavy duty iglidur® X bearing - even beyond 100°C. iglidur® X6 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Long term service temperature up to +250°C Up to 50% better press fit as iglidur® X High compressive strength Very good chemical resistance PTFE free

iglidur® Z: The high-temperature material Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association with soft shafts, edge loads and impacts. The bearings are at the same time suitable for temperatures up to +250℃. iglidur® Z is available as cylindrical bearings and plain bearings with flange. Excellent wear resistance especially with high loads High thermic stability For extreme loads Also for high surface speeds Insensitive to edge loads

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE foams in variable densities, many colors and compression hardnesses. In addition, KOPP offers you electrically conductive, static-dissipative and flame-retardant PE qualities. This program is rounded off by high-quality EVA and a unique EPDM-PE blend. The material cellular polyethylene All of our cellular polyethylene qualities combine the positive properties of a plastic: high aging resistance, high chemical resistance, low emission values, exceptionally uniform density, they are odor-free and can be thermoformed.

We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE foams in variable densities, many colors and compression hardnesses. In addition, KOPP offers you electrically conductive, static-dissipative and flame-retardant PE qualities. This program is rounded off by high-quality EVA and a unique EPDM-PE blend. The material cellular polyethylene All of our cellular polyethylene qualities combine the positive properties of a plastic: high aging resistance, high chemical resistance, low emission values, exceptionally uniform density, they are odor-free and can be thermoformed.

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE foams in variable density, many colors and compression hardnesses. In addition, KOPP offers you electrically conductive, static-dissipative and flame-retardant PE qualities. This program is rounded off by high-quality EVA and a unique EPDM-PE blend. The material cellular polyethylene All of our cellular polyethylene qualities combine the positive properties of a plastic: high aging resistance, high chemical resistance, low emission values, exceptionally uniform density, they are odorless and can be thermoformed.

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

Product group: Dyes Storing temperature: -20°C

Product group: DyesCellular Assays/ Detection-Labeling- kits CAS-Nr.: [79955-27-4] Storing temperature: 2-8°C Shipping condition: ambient MW: 460.4g/mol Formula: C25H16O9

We are an international trading company with its main activities in import and export of raw materials (ores and minerals) as well as substitute materials thereof.

Polyetherimide has recently joined the BIEGLO portfolio. Our sales portfolio for PEI contains rods and sheets from 8mm to 100mm diameter. As well as, PEI thin films below 1mm thickness. The maximum width is 1200mm for sheets and film. Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. PEI is naturally flame retardant and has a fire rating of UL94 V-0. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

Polyamide-imide (PAI), also known as the brand Torlon® comes in different grades and different shapes. PAI is known to be the highest performing meltable thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. BIEGLO offers PAI semi finished products, such as rods, tubes and sheets from different PAI types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Its mechanical strength at 205°C outperforms many engineering plastics at room temperature. The unique performance of Polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have. It is suitable for many applications, such as gears, rollers, plasma chamber hardware and wafer contact fixtures.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

The Dexnyl PEEK filaments of BIEGLO is a high performance product made by melt spinning. Semicrystalline PEEK has high tensile strength, it is exceptionally resistant to chemicals and can withstand extreme temperatures. These features ensure a longer product life, lower maintenance costs, less machine downtime and wider material design options compared to steel or aluminum parts. PEEK filaments can be used very well for 3D printing. Printing with PEEK requires 360 ° C to 380 ° C. So far, only specially modified 3D printers are able to achieve this heat. Sliced ​​woven and/or unidirectional fibers significantly reinforce matrix material and are a popular additive for composites. PEEK filaments are also used on musical instruments, rackets and wide or narrow woven straps, filtration mesh fabrics and sewing threads. Due to their low weight and high temperature resistance, PEEK filaments are popular in many other industies, such as automotive and aerospace industries.

The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. Our range of PEEK tubes starts with 25mm up to 1.480mm (external diameter); 20mm up 1.300mm (internal diameter). Our PEEK tubes are also available made of compounded PEEK.

PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. The Dexnyl PEEK rods of BIEGLO offer resistance to elevated temperatures, radiation and chemicals. Their dimensional stability and mechanical strength are second to none. Our PEEK has an excellent hydrolysis and electrical insulation. BIEGLO offers natural, colored and tribological modified PEEK with superior sliding properties and abrasion resistance. We offer a wide range of PEEK rods diameter starting at 6mm to 100mm. Our PEEK rods are also available made of compounded PEEK.

Technical plastic : Polyethylene (Short : PE) Product name Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 1000 and many more) Delivery form Sheets, cuts, milled products, base profiles Specification Polyethylene - technical plastic Polyethylene ( Short: PE ) is a technical plastic that can be processed easil. It has a density of about 0,95g/cm³ and with that it's the second least weighing plastic of all technical plastics and just because of that it offers a very interesting price. The moisture absorbtion of PE is about 0,0 %. The material is really good against lyes and acids , has a self-lubricating effect and is easy to mill ( cut, milling, lathe, water jet cutting and welding ). Furthermore it is a great material for abrasive fraught parts in e.g. machine engineering ( PE UHMW ), as inlay for bulk containers or as a cutting boards in the food industry or households. We would like to advise you which kind of PE RG ist the...