Industrial vehicles - Import export

Vacuum suction systems with special plates for rough surfaces such as stone slabs, plastic panels, wooden panels, wood based boards and much more up to 6000 kg.

Our mini cranes MRK can be used on any surface, fit into any van when folded and can be easily loaded and unloaded. Thanks to the crawler chassis, the assembly cranes can easily travel over uneven surfaces and even master extreme inclines. Thanks to the emission-free electric drive and the non-staining chains, they are also suitable for indoor use. They are operated directly or by radio remote control. Heavydrive offers you a wide range of these flexible all-rounders up to a maximum load of 10,000 kg for rent or purchase.

Due to its construction and suction plate form this panel suction system can be employed for both wall and roof panels It can be adjusted to fit the individual panel forms and profiles. By the deployment of extension arms even very long panels can also be safely and stabily transported.

Vacuum lifting devices for curved panes, concave and convex, inner and outer radius from 450 mm of up to 6000 kg for sale or hire. Also for wavy panes available.

Heavydrive®'s special rubber compound keeps the suction pads soft and flexible at temperatures below zero, just like snow tyres. This way, they can be used at temperatures as low as -20°C.

These extremely long and thin panes require special suction systems. Heavydrive® offers these suction systems in a wide range of sizes and loading capacities.

These devices are suitabele for transportigng heavy loads of up to 1300 kg, overcoming obstacles such stairs, ramps and tailboards. Also for loads containing liquids such as fridges & co. Heavy loads (such as switch an server abinets, safes, boilers, parts of mchinery and systems, etc.) can therefore be delivered down or up stairs, even by a single person.

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

You are planning a facade assembly with our overhead rail transport system and you would like guidance or you have any questions?

Our assembly lifts are ingenious - with a max. lift height of 7.9 m, it helps to safely manoeuvre loads of up to 500 kg. One of the decisive advantages of this assembly lift is that, during glass pane assembly, the vacuum suction cups can be driven to the facade without problems, as Heavydrive uses counter weights. With conventional lifts, for exhibition stand construction or sound engineering, the lifting carriage is underneath the lifted object. With our models, this would be disruptive. Last but not least, this practical all-rounder is folded by hand and, if needed, even fits into a car. It is hand driven and therefore requires hardly any servicing. Movable under a load of 500 kg.

Suction systems for flat glass with up to 14000 kg capacity. For the most part variable to fit pane size.

Our original Heavydrive glass transport wagons are easily collapsible and can be assembled again using only a few grips. Our special heavy load models with a lifting capacity of up to 1,000kg are secure due to a low centre of gravity, they guarantee optimal anti-slip security and can be adapted to different pane sizes. The new “AIR” product line uses pneumatic tyres for highly shock-absorbing transportation and is suitable for all terrain, including moving over paved surfaces. We have developed and manufactured these wagons and can manufacture custom requests to meet your demands!

The glass lifting device is an innovative solution for unloading, loading, transport, and fitting glass. One person can transport a glass panel weighing 80 kg. The device can be easily assembled and disassembled – it only weighs 35 kg. It has large 13 inch wheels which allow it to move on uneven surfaces. The wheelbase can be adjusted, which enables it to pass through doors and move on narrow pavements.

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

Our glass assembly equipment lifts and fits windows and panes of up to 1300 kg to the millimetre, even overhead, and are built narrowly so that they can fit through doors and move down corridors. Using the battery-operated pane setter is a foolproof way to avoid awkward and heavy manual lifting. Remote control allows you to ensure the self-driver is always under control.

Other information IF -Design Award for Triflex®-Design Torsional movements possible Other information Installation instructions Joining, separating and filling of the Triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® 332.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 352.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open 333.16 Inner height hi: 16 mm Inner width Bi: 16 mm Bending radii R: 38 - 100 mm Pitch: 13.3 mm E-Chain®. 333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm E-Chain®. 333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm E-Chain®. 333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm E-Chain®. 353.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 10 - 250 mm Pitch: 30 mm E-Chain®, snap-open This modular, rugged joint system is suitable for: Three-axis movements for machines of any type For dirt-filled environments High tensile strength Where rectangular shapes are requested Completely closed - reliable protection against dirt and chips Combination of different bending radii and axes Connection and separation possible at any chain Flanged mounting brackets or brackets, galvanized steel Snap-open Series 352 and 353 Combination of Series 353/333 possible Typical industrial sectors and applications Machine tools Robotics Material handling system Plastics industry Construction machinery Vehicle manufacturing Medical equipment IF -Design Award for Triflex®-Design Torsional movements possible

Other information iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible Other information Installation instructions Join, separate and fill the easy triflex®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Triflex® E332.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E332.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E332.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E332.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® E333.25 Inner height hi: 25 mm Inner width Bi: 25 mm Bending radii R: 48 - 200 mm Pitch: 14.5 mm e-chain® E333.32 Inner height hi: 32 mm Inner width Bi: 32 mm Bending radii R: 75 - 250 mm Pitch: 25 mm e-chain® E333.50 Inner height hi: 50 mm Inner width Bi: 50 mm Bending radii R: 100 - 250 mm Pitch: 30 mm e-chain®. E333.75 Inner height hi: 75 mm Inner width Bi: 75 mm Bending radii R: 140 - 300 mm Pitch: 36 mm e-chain® This modular joint system is especially suited for: Three-axis movements of machines For simple robotic applications Quick installation of cables with "easy" system Simple filling from both sides Where rectangular shapes are required Combination of different bending radii and moving directions Shortening or lengthening possible at "any point" KMA mounting brackets with integrated strain relief Typical industrial sectors and applications Machine tools Robotics Handling equipment Material handling system Plastics industry Construction machinery Vehicle manufacturing General mechanical engineering Medical Equipment Office furniture iF-Design Award for easy triflex® Design UL94-V2 classification Torsional movements possible

Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Small pitch for silent operation Protection for cables and tubes against chips (even hot chips) Rugged and tight Space-saving with good ratio of inner to outer dimensions Modular interior separation options Small pitch for low-noise, silent operation Very small radii possible through small pitch Smooth, chip-repellant exterior contour Removable lid for shortening the installation time Double stop dog system for longer unsupported lengths KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Materials handling Construction machinery Machine tools Timber Processing Machines Long travels in many industrial sectors Semiconductor ESD versions Theater and entertaining industry Vehicles General mechanical engineering etc. In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request

Surface protection for ship renovations Our specialised surface protection solutions for the marine industry (but also for the renovation of hotels, hospitals, offices, etc.) offer you maximum protection for sensitive surfaces during demanding construction and renovation projects. Developed for use on cruise ships, yachts, military and industrial vehicles and offshore platforms, these flame-retardant protective films offer first-class protection against soiling, damage and liquids. The self-adhesive, films are easy to install and leave no residue when removed.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical stress. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical loads. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

Leading the market Leather laminating is found mainly in the automotive industry. High quality vehicle interiors are characterized by a sophisticated design made of perfectly processed and adapted materials. Leather surfaces are no longer exclusively reserved for premium vehicles; they are also becoming increasingly used in high volume and mid-priced vehicle interiors. As a natural material, leather presents tough processing challenges. Variations, quality/quantity requirements and numerous project-specific parameters demand smart manufacturing solutions that can only be produced with extensive experience and in-depth technology and process expertise. FRIMO's tooling and equipment technology in leather processing leads the market. Along with leather laminating come leather back-foaming and leather scoring for hidden airbags.

BIEGLO offers injection molded or machined PEEK screws that can perfectly replace metal screws. Our PEEK screws are applied to imrove the chemical resistance without loosing too much of the mechanical strength. Besides stock made screws, BIEGLO offers custom made screws based on our customers requirements.