Results for
W. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteW. KÖPP GMBH & CO. KG
Germany
Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
SCOOP II is at home anywhere. Comprising high-impact polystyrene with a material thickness of 2.5 mm, SCOOP II offers a host of application options. And not just in the kitchen – but also in other areas of daily life where the organizing and sorting of cutlery and various small utensils is called for. Suitable for all currently available drawer box systems, SCOOP II is based on transverse cutlery compartments and multi-purpose sections. Particularly in pull-outs without soft close, the transverse compartments guarantee a virtually unlimited service life, since sharp objects – such as knives – are no longer thrust against the material each time the drawer is opened.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
SCOOP II is at home anywhere. Comprising high-impact polystyrene with a material thickness of 2.5 mm, SCOOP II offers a host of application options. And not just in the kitchen – but also in other areas of daily life where the organizing and sorting of cutlery and various small utensils is called for. Suitable for all currently available drawer box systems, SCOOP II is based on transverse cutlery compartments and multi-purpose sections. Particularly in pull-outs without soft close, the transverse compartments guarantee a virtually unlimited service life, since sharp objects – such as knives – are no longer thrust against the material each time the drawer is opened.
Request for a quoteBERATRONIC GMBH
Germany
Technical data •Max. Panel size up to 1500mm x 670mm •PCB thickness from 0.1-17.5mm •Smallest hole 0.075mm •Smallest trace/spacing 50µm •Copper layer up to 1000µm •Number of layers up to 58 •Aspect Ratio 20:1 •Rigid flex and flex •Viaplugging •Impedance control •Laser Microvias •Blind, Buried Vias Basic material •FR4, FR4 High TG, FR4 •halogen-free, CEM1/3, Rogers, •Ceramic (Al2O3), polyimide and others Surface •HAL lead-free, HAL Pb/Sn, chem. Ni/Au (ENIG), chem. Ni/Pd/Au (ENEPIG), chem. Sn, chem. Ag, OSP(Entek), galv. Ni/Au, Carbon, Ag/Pt (thick film technology) and others Solder resist and placement printing •Different paint systems (including halogen-free) and colors Standards •ISO 9001:2015 / IATF 16949 •UL listing •RoHS / REACH •Manufacturing according to IPC A600 class 2 and 3 Delivery times •Rush service from 1 AT •Series from 10 AT Data preparation •Legacy document preparation •Scan Service •Data conversion •CAM data preparation •CAD layout service
Request for a quoteALTMANN GRAPHISCHE MASCHINEN GMBH
Germany
width 52 cm age 1995 flexible fold knife unit digital version mobile Delivery time: immediately Ref: ST230358A Please ask for price. We ship and install worldwide!
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
With AGO-Wood, AGOFORM is providing a new combination of materials in solid wood and synthetic rubber. The new cutlery insert allows flexible organisation in any drawer and unites aesthetics and functionality. Flexibility The AGO-Wood set consists of a wooden insert and an anti-slip mat, which are delivered custom-fitted and in one individually packaged box. The wooden insert is available in beech, maple, walnut or oak and can be moved laterally as individually desired.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
With AGO-Wood, AGOFORM is providing a new combination of materials in solid wood and synthetic rubber. The new cutlery insert allows flexible organisation in any drawer and unites aesthetics and functionality. Flexibility The AGO-Wood set consists of a wooden insert and an anti-slip mat, which are delivered custom-fitted and in one individually packaged box. The wooden insert is available in beech, maple, walnut or oak and can be moved laterally as individually desired.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
With AGO-Wood, AGOFORM is providing a new combination of materials in solid wood and synthetic rubber. The new cutlery insert allows flexible organisation in any drawer and unites aesthetics and functionality. Flexibility The AGO-Wood set consists of a wooden insert and an anti-slip mat, which are delivered custom-fitted and in one individually packaged box. The wooden insert is available in beech, maple, walnut or oak and can be moved laterally as individually desired.
Request for a quoteLALK GMBH &CO. KG
Germany
This pipe laser is easier to use, fits into tighter spaces, and increases convenience and safety for workers.
Request for a quoteAAAGILER GMBH
Germany
Collapsible emergency sumps / pans / spill containment are the ideal solution for the immediate collection of non-critical and critical liquids. These innovative drip pans reliably prevent the contamination of groundwater and the environment if fuels, lubricants, hydraulic or gear oils and acids leak unexpectedly.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Spray nozzle SD 30: flexibly controlled spray width The SD 30 is also made of high-quality stainless steel. Thanks to its rugged design it is particularly suitable for spray tasks that demand high performance in continuous operations. As a special characteristic it is possible to adjust the width of the spray jet - either manually or via remote control.
Request for a quoteFRIMO GROUP GMBH
Germany
Ideal for trimming and scoring hidden airbag compartments on thermoformed skin. After the fabrication of IP skins through thermoforming, two separate fabrication steps are still needed before foaming. In the first step, the thermoformed skin will be trimmed in the external zone through punching or a blade cutting process. Depending on the requirements, this is where FRIMO's blade cutting equipment comes into operation. In the second step, the skin will be weakened in the airbag area by a blade. By using the new FRIMO FlexTrim Combi Trim Scoring machine, both steps can be realised at once. The skin is positioned in a common component fixture and finished with two different cutting tools. The new system concept, with its flexible design and layout possibilities, offers a variety of options for combinable process and operation groupings. As an example : one 2-station system with two robots, which are equipped with automatically exchangeable cutter heads, and where two different products
Request for a quoteFRIMO GROUP GMBH
Germany
Ideal for trimming or scoring foils and skins FRIMO's scoring process technology was developed for producing hidden airbags in instrument panels. In contrast to composite component weakening in which the substrate, foam and skin are all weakened in one step, FRIMO prefers material specific single steps. The foil or skin is weakened by blade before foaming. The substrate and foam are separately weakened at the end, which can easily be integrated into the necessary component cutting process. Depending on the customer-specific requirements, this is where FRIMO punching machines or milling machines come into play. Compared to weakening entire composite components (for example, with a laser), a lower investment is required. For the weakening of leather parts for hidden airbags, FRIMO offers a patented process in which the skin is weakened by a rotating circular knife. This process guarantees high precision and odorless results with the shortest possible cycle times.
Request for a quoteFRIMO GROUP GMBH
Germany
Ideal for trimming or scoring foils and skins Blade cutting is a very fast, precise and clean process. In the automotive industry, it is particularly well suited for kiss cutting, edge cutting and for cutting notches in foils and leather skins to prepare for edge folding processes. A special form of blade cutting is scoring, i.e. the intentional weakening of leather, plastic foils and form skins to create specific tear lines, such as to allow the release of airbags. Ultrasonic cutting technology allows for even more possibilities in die and kiss cutting for foamed components with appropriate material combinations. This technology allows parts to be cut dust and chip free with a very low noise level.
Request for a quoteFRIMO GROUP GMBH
Germany
Good ergonomics and optimal component accessibility Milling can be used to not only create highly complex component geometries, but also to achieve precise cutting depths. It is often used in combination with punching operations to produce component variations or small quantities, such as of instrument panels, center consoles or door panels. FRIMO FlexTrim milling machines have been specially developed to process complex 3-D plastic components. The newest generation of FlexTrim milling machines offers an attractive price/performance ratio. The new rotary table and product fixture concept ensures excellent ergonomic conditions for the operator and optimal component access for the milling robots. The use of multiple product fixtures per station reduces the number of necessary changes, thereby increasing productivity. Through the use of new milling technology with optimized chips, an effectiveness ratio of up to 95 % is possible with appropriate material combinations.
Request for a quoteSTI GROUP / STI - GUSTAV STABERNACK GMBH
Germany
Flexible Shelf is a modular system made of corrugated board for the flexible creation of different shelf displays in 1/4 and 1/2 pallet sizes. Attachments, posters, side panels and base claddings turn the merchandising unit into a creative themed display at a low cost.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Flexibility - Import exportNumber of results
18 ProductsCountries
Company type
Category