Electric motors - dc - Import export

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

With interuptor limit, clamping length 54mm and drive shaft guide 10 mm toothed cone and M8 Security for threads, 55mm center distance of axes Wiper motor without switch, with parking position Wiping angle: 90 ° Mounting arm wiper: cone M8 Engine mounting: M14x1mm Support: 57mm cone M8 Shaft length: 94mm Clamping length: 54mm max. Wiper arm / wiper blade: 650 mm

Rated voltage: 24 V DC Idling speed: 78 rpm Rated torque: 8 Nm Gearing: left side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm Shaft length: 43 mm Shaft round with groove (W278) Type: SWMV

SWF gear motor 404.319 Rated voltage: 24 V DC Idling speed: 70 rpm Rated torque: 3.3 Nm Gearing: right side, bolt hole circle 50.8 mm, hole centre distance 43.5 mm Shaft diameter: 10 mm Shaft length: 24 mm Round slotted shaft (W199) Type: SWMP

SWF gear motor 404.312 Operating voltage: 24 V DC Idle speed: 228 U / min Rated torque: 2 Nm Starting torque 35 Nm Gearing: right side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm, shaft attachment piece 12 mm Shaft length: 31 mm Round grooved shaft with interior thread M4 (W128) Type: SW2K

SWF gear motor 403.280 Rated voltage: 24 V DC Idling speed: 52 rpm Rated torque: 2 Nm Gearing: right side, bolt hole circle 84 mm Shaft diameter: 8 mm Shaft length: 22.5 mm Round shaft flattened on one side (W45) Type: SWMP No interference suppression, SWF403.280 with terminals for connector

Gear motor for Einhell Garage door drives 24 V DC is the same motor as 210251006 GT 52 GTA 150 GTA 360 TA 50 TAF 311 TAF 321 TAF 351 TAF 362 TAF 2000 VL 500 VTA 702 K VTA 702 Z

Original SWF 404854 gear motor for Hörmann SupraMatic E, SupraMatic P, SupraMatic, ProMatic, ProMaticP, EcoMatic, EcoStar and RotaMatic. Does not fit SupraMatic H ! 2 - wire (green and brown) connecting cable is added, with 3 holes tapped PN = 54 W, IN = 6,0A, 24 V DC, rpm = 65 without load 1-channel Hall sensor type: DCK31 (W277)

Gear motor NIDEC 404.682 for Sommer hinged gate operator TWIST 200, SWF 404682 Rated voltage: 22 - 24 V DC Idling speed: 40 rpm Rated torque: 4 Nm Gearing:hollow shaft KRC profile (W224) type: GMPD

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.