Results for
AAAGILER GMBH
Germany
Below is an overview of the main categories and products that can be found in the catalogue: Beacons and Mobile Barrier Systems: products for temporary traffic control and safety. Installation devices: Solutions for the safe installation of traffic signs and markings. Shaft tubes and sign posts: Elements for mounting traffic signs. Signal and batten stands: Stands for traffic signs and markings. Road markings and thresholds: Products for marking roads and paths. Traffic cones and collision protection: Traffic cones and protection systems for road workers. Line posts and accessories: Accessories for traffic safety measures. Barrier line holders and crowbars: Tools and holders for barrier lines. Ground pegs: Ground anchors for fastening traffic safety elements. Support tree system: Systems for stabilising trees in the construction area. Channel struts and trench spikes: Products for underground and trench construction.
Request for a quoteLALK GMBH &CO. KG
Germany
With its 3x360° laser lines, a total of 6 laser crosses are created. Due to its good visibility and high accuracy this device is a powerful tool on the construction site. By using a suitable receiver, the range can even be doubled by using a suitable receiver. The multi-line laser is compact and has rubberized edges. In addition, It can be powered in 3 ways, making it almost impossible for you to run out of power.
Request for a quoteBAUSHOP EXPRESS GMBH
Germany
Bomag BT 65 rammer for frequent use Fields of application: - Earthwork and asphalt construction. Pipe and conduit construction - Trench and canal construction, backfilling, foundations and repair work on asphalt. For frequent use with the highest demands on compaction results and efficiency. - Most powerful rammer in its class - Proven Honda 4 -stroke engine - Optimized full engine protection - Double air filter system - Hour meter and tachometer - On/Off safety switch for simultaneous switching on and off of engine and fuel supply in one hand movement Incl. 3-2-1 original Bomag warranty!
Request for a quoteBAUSHOP EXPRESS GMBH
Germany
The Husqvara K 770 is a powerful all-round cut-off machine with features that make it one of the best cut-off machines on the market.The semi-automatic SmartTension ™ system enables optimal power transmission, minimal wear and maximum belt life. The light weight, outstanding power-to-weight ratio, reliable starting mechanism and exceptionally low vibration mean less stress and maximum productivity. SPECIFICATIONS: ENGINE: Output power: 3.7 kW Max. recommended speed: 9,300 rpm Speed at max. output: 9,000 rpm Cylinders: 1 Number of strokes: 2-stroke engine Exhaust emissions (CO2 EU V): 711 g/kWh Power source: Petrol CUTTING EQUIPMENT: Max. Cutting depth: 125 mm Max. Cutting disc diameter: 350 mm Pick up diameter: 20/25,4 mm Max. Cutting disc thickness: 5 mm Max. speed: 90 m/s Coolant: Wet
Request for a quoteBAUSHOP EXPRESS GMBH
Germany
The F-Line - the perfect compulsory mixer for every application, meeting your requirements optimally and economically. Advanced technology, for performance and environmentally friendly operation. The standard gearbox runs at 32U/m, with the Vario gearbox the revolutions can be varied between 9 - 55 U/m. The highlights at a glance: - Powerful and very robust motor/gearbox. - Optimal performance and easy handling - Easy cleaning and maintenance - Fast, effective mixing with large capacity - Optimal mixing functions BARON F-120: - Safety circuit when lid is opened - Position bolt for lid safety during use - Motor protection prevents contamination - Simple and efficient operation - Adjustable mixing blades - Optional rubber blades Attention!!! In order to be able to connect the unit to a normal Schuko socket, the CEE to Schuko adapter must also be ordered under the Optional accessories tab.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
IGUS® GMBH
Germany
Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification
Request for a quoteResults for
Construction - machines & equipment - Import exportNumber of results
7 ProductsCountries
Company type