Compacting - Import export

Filter+regulator+lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1bar: 280 Nl/min Pressure range up to 15 bar

Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

filter water separator Sizes: 1/8" and 1/4" Filter fineness: 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 450 Nl / min Pressure range up to 15 bar

The cylinders described here are pneumatic drive units mainly for linear movement. The piston rods or the magnetic traction transfer the movement of the piston to the components to be moved. We offer round, short-stroke, compact, profiled barrel cylinders and piston rod-free drives. In addition you will find here a whole range of sensors, fastening parts and accessories. Our piston rod cylinders are fabricated according to various ISO standards and are available in single-acting or double-acting design. They are suitable for filtered, unoiled or oiled compressed air.

The cylinders described here are pneumatic drive units mainly for linear movement. The piston rods or the magnetic traction transfer the movement of the piston to the components to be moved. We offer round, short-stroke, compact, profiled barrel cylinders and piston rod-free drives. In addition you will find here a whole range of sensors, fastening parts and accessories. Our piston rod cylinders are fabricated according to various ISO standards and are available in single-acting or double-acting design. They are suitable for filtered, unoiled or oiled compressed air.

Unit size approx. 380 x 380 x 1,250 mm (LxWxH) 5-stage filtration with coarse, pre and HEPA H-14 filter stage Available as basic unit and modular air purifier Scientifically tested and confirmed by Hygiene Institute Timer, automatic CO2 control, virus inactivation and much more possible. Suitable for room sizes of approx. 15 - 55 m²

Filter regulator + lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 260 Nl/min Pressure range up to 15 bar

Compact series lubricators with plastic housing Sizes: 1/8" and 1/4" Flow rate at 6 bar with ∆p 1 bar: 700 Nl/min Pressure range up to 15 bar

Filter regulator of the compact series with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 600 Nl/min Pressure range up to 15 bar

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

Compact series filters with plastic housing Sizes: 1/8" and 1/4" Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 Nl / min Pressure range up to 15 bar

The AT multi-turn actuators are characterized by their compact shape and clear design. Integrated grooves for sensor mounting. Angle of rotation from 0° to 180°.

Thanks to their compact but stable design, the CM compact cylinders are particularly suitable for use in small spaces. Diameter range between 20 and 63 mm. Also with anti-twist device.

Great thrust and small installation space. CP cylinder diameter 125 - 200 mm in a compact but robust design.

Compact rack with full pull-out For the reception of load carriers like plastic boxes Optimal storage of small parts Sample shipment for test purposes possible

Compact rack with full pull-out For the reception of load carriers like plastic boxes Optimal storage of small parts Sample shipment for test purposes possible

Compact rack with full pull-out For the reception of load carriers like plastic boxes Optimal storage of small parts Sample shipment for test purposes possible

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

Pressure regulator of the compact series, quick exhaust Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

LG 164 is a compact, lightweight yet powerful reversible plate compactor developed for smaller jobs such as driveways and pathways, private house projects and narrow trenches. It is the ideal machine to use when macadam beds are thinner and you need nimble, responsive handling. The Hatz 1B20 diesel engine reduces fuel consumption and emissions, while quality components reduce vibrations.

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

Features: — High rigidity and compactness: With excellent rigidity and compactness, this module offers possibility for size optimization at given thrust requirements. — Lightweight, high velocity and high acceleration: The ironless linear motor combined with an aluminum slider gives low self load, which is ideal for high acceleration and high velocity applications. — Smooth motion: Using ironless linear motor as the actuator, CLS run smoothly even at low speeds without cogging force. — High precision: High-precision positioning is achieved using closed-loop control with optical encoder based feedback. Available precision grades include Normal (N), High (H), and customized Precision (P) for even more demanding applications. — Multiple sliders: CLS can accommodate multiple sliders on the same axis, each controlled separately.

Features: — Moving magnets. — Fixed cable. — Short stroke & high duty cycle. — Angled or straight connector.

Features: — Exceptional dustproof design: CLMS has special structural design to make the whole module dustproof. In adverse working environments, the module will perform well while there will not be any structural issue caused by bellows. — Exceptional compact design: CLMS has optimized the allocated space for linear motor, linear guide, and optical (magnetic) encoder to minimize the size under thrust. — High reliability: CLMS’s encoder is installed horizontally, thus prevents its position to be affected by external impact and retains system precision. — Customization: Standard CLMS comes with magnetic encoder for position feedback. We can also install optical encoder based on customer’s need for precision while retaining the same dimensions. Other customized designs such as multi-slider, X-Y and gantry systems are available as well.

Plugs into open and unused CF ports to block the unused ports and secure them from unauthorised access.

With the FPM (once F&G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Compact Drives Have you ever been faced with the situation where the drive speed cannot be changed, because an explosion-proof motor is used and installation of a frequency inverter in the electrical control room is too complex? The solution is a motor with an integral frequency inverter! Compact motor type CD 112 M-4I. With this design, the motor can be directly installed and the drive speed can be controlled Voltage: 380 to 500 V Performance range 0,55 - 11 kW Variable speed drive system for use in Zone1 with explosive atmospheres Spatial integration of flameproof enclosed motors (CD series) in a standard version with specially adapted frequency inverters derived from mass produced standard models Resonance effects in the drive incomers are avoided by spatial integration, as only one sinusoidal supply connection is available. This means that filtering which is required for installation of an external inverter is not required This drive fulfills the highest demands in the area of control engineering, with overload, smooth running, etc., as a result of the vector control technology applied The integrated PID controller simplifies the closed-loop process control The Bus technology which is available allows optimum adaption to suit the work process. The frequency inverter module can be retrofitted for all PTC thermistor motors of the CD series, from frame size 80 - 112 The fixing dimensions are standardized. It is therefore possible to exchange the motors (for example Ex e) with this compact drive in many applications The payback on investment is achieved by the savings in energy costs Mechanical control with throttle valve controls or bypasses can be easily replaced. The efficieny of your installation improves significantly

Aero Cell VXL, the high efficiency MiniPleat compact filters made up of synthetic media are available in a wide range of efficiencies from M6 F9 (65% 95%+). Aero Cell VXL is designed to use in HVAC installations where highest degree of air cleanliness is required. Extended surface are to 400 and 430mm are its specialty.

Aero Cell V, the high efficiency MiniPleat compact filters made up of synthetic media are available in a wide range of efficiencies from M6 F9 (65% 95%+). Aero Cell V is designed to use in HVAC installations where highest degree of air cleanliness is required. The compact design, larger surface area and low initial resistance made it an Ideal alternative to ordinary Bag filters & Box type filters of the similar efficiencies.

Aero Cell SV , the high efficiency MiniPleat compact filters made up of synthetic media are available in a wide range of efficiencies from M6 F9 (65% 95%+ ). Aero Cell SV are designed to use in HVAC installations where highest degree of air cleanliness is required. The compact design, larger surface area and low initialresistance made it an Ideal alternative to ordinary Bag filters & Box type filters of the similar efficiencies.