Brakes - Import export

Brake caliper complete including set of brake pads main brake (hydraulic foot brake) for wheel loader FERRUM DM620x4 - consisting of 1 piece of assembly as shown.

Drum brake complete with set of brake pads and hydraulic cylinder for wheel loader FERRUM DM416x4 & DM312 x4 - consisting of 1 piece of assembly as shown.

Set of brake pads parking brake for wheel loader FERRUM DM620x4 - consisting of 2 pieces as shown.

Master brake cylinder for wheel loader FERRUM. Will be delivered like shown.

Brake disc main brake (hydraulic foot brake) for wheel loader FERRUM DM620x4 - scope of delivery consisting of 1 piece as shown.

Set of brake pads main brake (hydraulic foot brake) for wheel loader FERRUM DM620x4 - consisting of 2 pieces as shown.

Set of brake pads drum brake for wheel loader FERRUM DM416x4 - consisting of 2 pieces as shown.

Set of brake pads parking brake for wheel loader FERRUM DM416x4 - consisting of 2 pieces as shown.

iglidur® rollers in application 14HMInews.wmv Material data of the iglidur® elastomeric bandage Density: 1,25 g/cm³ Flexural E-modulus (DIN 53457): 130 Shore D hardness (DIN 53505): 50 Maximum long-term service temperature: 80 °C Maximum short-term service temperature: 110 °C Lower application temperature: - 40 °C Specific volume resistance:: <10¹² Ωcm Surface resistance: <10¹¹ Ω

Pneumatic cylinder RI with a closed oil circuit system to regulate the travel speed when retracting and/or extending. Also with skip and stop function.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication

The use of high-quality brake fluid is just as important as high-quality brakes. High stresses such as high-speed driving, heavy-duty transportation or extreme loads on the brake system due to downhill driving demand a high level of performance from the brake fluid. Selecting the right brake fluid for the respective type of car or commercial vehicle and changing the brake fluid regularly are essential for safe driving. We offer brake fluids for all types of vehicles and for driving under difficult conditions, as well as products with an extended safety reserve. We will provide you with personal advice on the right product.

Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101100

Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101099

Alternator 28V for FERRUM wheel loader . 24-volt systems must be supplied with 28-volt charging voltage to remain intact. Version for 5-pin charge controller. We usually use this model in the brake-assisted models DM308 x4 (V1 & V2), DM312x 4 & DM416 x4 (only V2 and not V1!)

Brake booster with connection to vacuum system for wheel loader FERRUM. Will be delivered like shown.

Brake fluid

STAR high quality bending film / folding foil is a high quality product, which offers best protection for parts and press brake tools on nearly every press brake machine. It is tested and developed under most difficult conditions. Test our high quality bending film / folding foil / antiscratch film and see, how you can protect your press brake tools, your bended parts and save money by saving time and avoiding extra work! Avoid following problems : Scratches imprints marks other problems caused by the direct contact from press brake tool and part extra work to clean the part after having scratches, imprints or marks scratches on press brake tools

Disc diameter Ø 360 mm or Ø 600 mm other diametres on enquiry Bent for Unwinding (for drums): up to Ø 550 mm width max. 200 mm

General Characteristics of the brakes: 98/37/EEC Machine Instructions Regulation 73/23/EEC Low Voltage Regulation 93/68/EEC Electromagnetic Compatibility Regulation 60335-1-CEI Safety of electric devices for domestic use Regulation Regulation VDE 0580 Certificate UL/CSA File E210965 - EE219203 Certification ISO 9001:2010 95/16/CE: TÜV Institute Atex Ex Group II class 1 GD d T6 IIC in phase of certification nearby TUV SÜD 0123 New Machine Instructions 2006-42

Cemp offers custom-made solutions. The main customers are the chemicals industry, pharmaceutical industry, power plants and minings. Further fields of application are the on-shore- and off-shore plants as well as the shipbuilding industry. The name Cemp stands everywhere for guaranteed security against explosion of dangerous dusts and gasses . We supply from our existing stock Kalefeld cemp- flameproof motors / hazardous motors Exd(de) IIC T4 in frame size 63, 2-poles up to frame size 160, 2-poles (0,18 – 18,5 kW) and frame size 63, 4-poles up to frame size 180, 4-poles (0,12 – 22 kW). All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 2 -8 weeks after receipt of order . Cemp Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Flameproof - Explosionproof Brake Motors Series D, H, P cast iron Frame size 63 - 250 Ex-d, Ex-de Temperature class T3, T4, T5 Power 0,18 - 55 kW Protection IP55, IP66 ATEX IIB / IIC Series F-F aluminium Frame size 63 - 80 Ex-d, Ex-de Temperature class T3, T4, T5 Power 0,12 - 1,5 kW Protection IP55, IP66 ATEX IIB / IIC