Results for
AAAGILER GMBH
Germany
Rent our mobile gate: up to 8 m wide, with 24 hrs automatic access control and can be shipped globally Our sliding gates are versatile and can be used in a wide range of applications. Here are just a few examples: 1) Construction sites: Our sliding gates are ideal for construction sites, where they can be used to secure access points, prevent unauthorized entry, and protect valuable equipment and materials. 2) Events: Our sliding gates can be used at events such as festivals, concerts, and sporting events to control access, ensure safety, and maintain order. 3) Commercial / industrial properties: Our sliding gates are perfect for securing the perimeters of commercial properties, including warehouses, factories, and distribution centers 4) Parking lots: Our sliding gates can be used to control access to parking lots, ensuring that only authorized personnel or vehicles can enter 5) Security sensitive areas like airports, embassies, prisons, data centres etc.
Request for a quoteIDENTBASE GMBH
Germany
Our Key fobs fits conveniently on a keyring or lanyard and can be printed on with your custom artwork. The Key Fobs commonly are used for: Access Control, Cashless vending, Time and Attendance, Network log-on Security, Vehicle IDentification, etc. The Wristbands commonly are used for: Events, Music Festivals, Theme Parks. Our Key Fobs and Wristbands are available in different sizes, shapes and colours
Request for a quoteIDENTBASE GMBH
Germany
When you partner with Identbase and you access all leading card printer brands (Evolis, Fargo, HiTi, Magicard, Dascom, Authentys, Datacard, Zebra, Nisca), the best after sales support services and leading terms on all consumables, plastic cards, software, badge holders/lanyards, readers, intelligent cards, access control, time attendance.
Request for a quoteIDENTBASE GMBH
Germany
The Barcode Readers/Scanners is an electronic device designed to capture and decode or ''read'' barcodes, while Card Readers are used to add information to cards or to read/scan information stored on them These devices are commonly used for identification authentication, access control, attendance tracking, inventory tracking, point-of-sale transactions, employee’s attendance, monitoring inventory and much more.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Drive carriage complete with release lever and emergency release A and B for BGT 63, GTA 160, GTA163, TA-G 63, TA 160, TCA 500/2, BM 60; EX; II
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
You'll receive a replica made of steel (second image) the original one is no longer available
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This spring is turning left Wire diameter 4,7 mm Inner diameter 50 mm convolutions 98 L= 420 mm Manufacture Series 40 years between 99-2011 suitable for left view from the inside. Manufacture Series 20-30 years between 86-99 suitable for right view inside The spring identification is labelled on the aluminium banneret of your old spring.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Hörmann Roller holder hinge, LTF 3006956 left and right side version. Here you are buying just the hinge. Former article numbers are: 3007952 3004333 3003078 3006956 You'll receive a replica as the original one is no longer available.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This torsion spring is turning to the left Wire diameter: 4.25 mm Inner diameter: 50 mm convolutions: 82 approx. 340 mm long
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
The original yellow roller with eccentric disc is no longer available, it will come as a replica with a precisely laser-cut eccentric disk and a white polyamide roller ( screwless )
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This spring is turning left Length without eyelets approx 390mm Wire diameter 4.5 mm Inner diameter 50 mm convolutions 87 The spring identification is labelled on the aluminium banneret of your old spring. In case the aluminium banneret is gone, in order to identify the correct torsion spring we need the following data which you please find on the type plate on the inner face of the door section.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
applicable on the right and on the left You'll receive a replica, the original one is no longer available. Note: 60 mm approx. length
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
ACK42 special offer in silver colour only, while stocks last – suits top-hung and pivot-hung windows, domes, skylights and roof lights. Adjustable chain actuator ACK42 – 230 V double insulated with stainless steel double link chain , in a special protective housing made epoxy dust glazed aluminium pressure die casting , complete with holder and accessories, to open top-hung and pivot-hung windows, with PVC cable, silver colour standard fastener and black top-hung window casement console (10 mm adjustable). Scope of delivery: - Casement console for top-hung window art. 3A1001 - Casement console for pivot-hung window art. 3A1355 Specifications: Mains voltage: 230 V ~ 50 Hz Power consumption : 0,32 A Power consumed with load: 75 W Thrust and traction : 300 N Idling speed: 28 mm/s Idle stroke duration: 14 s Minimum window height: H = 800 mm Adjustable limit switch: 10-15-20-25-30-35-40 cm Electronics with an acoustic warning device to alarm for user in case of false...
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Digital control system with obstacle detection for 1- or 2-gate hinged door or sliding door operators 230V. Various possibilities for programming, slowdown in end position as well as soft start. Automatic closure after having left the photocell or after a certain time. Administration of end switches, if existent. Count of cycles etc. Force regulation for each gate separately possible. With this control system you can learn to your old electromechanical operators with 230V the obstacle detection. That means, in case of obstacles the gate is immediately stopping and in shortly moving in opposite direction (in case of hydraulic operators is this function not possible). A plug-in position for the radio receiver art. n° 11B025 with 433 MHz integrated. For sure, you can also connect already existing radio receiver. Dimensions of the box: 300 x 230 x 100 mm
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Einhell mini remote control HS 434/6, 434 MHz 6-channels Coding: 16.7 million possibilities, for garage door operators BGT 63, BM 60, TA 160, TA-G 63, TA-G 83, TA-G 103, GTA 160, GTA 163, side hinged gate operator AFA 2601,EFA 1200, FA-G 2601, FAG 1601 Dimensions: 38 x 50 x 15 mm, battery: 23 A, 12 V Programming the transmitters: Hold the learning key located in the operator down for 4 seconds until the red control LED goes on. Then release the button and press the chosen control button on the manual transmitter. The red LED now off. The control code has now been stored. Note: You can store a max. 3 manual transmitters in the operator. If a fourth transmitter is stored, the code set for the first transmitter is lost. The control code is not lost in case of power failure. With malfunction pull the mains plug and repeat operation. If you want to use more than 3 transmitters, an additional receiver must be installed in the receiver /operator, than you may order transmitter...
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
You'll receive a replica with a precisely laser-cut eccentric disc and a white, lathed polyamide roller and screw. The original with the yellow roller is no longer available.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
The torsion spring is turning right Wire diameter: 5 mm Inner diameter: 50 mm Turns: 98 L= ca. 480 mm The spring identification is labelled on the aluminium banneret of your old spring. In case the aluminium banneret is gone, in order to identify the correct torsion spring we need the following data which you please find on the type plate on the inner face of the door section.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
ACK42 – suits top-hung and pivot-hung windows, domes, skylights and roof lights.Adjustable chain actuator ACK42 – 230 V double insulated with stainless steel double link chain , in a special protective housing made epoxy dust glazed aluminium pressure die casting , complete with holder and accessories, to open top-hung and pivot-hung windows, with PVC cable, white colour RAL 9010, with standard fastener and black top-hung window casement console (10 mm adjustable).Scope of delivery: - Casement console for top-hung window art. 3A1001 - Casement console for pivot-hung window art. 3A1355 Specifications: Mains voltage: 230 V ~ 50 Hz Power consumption : 0,32 A Power consumed with load: 75 W Thrust and traction : 300 N Idling speed: 28 mm/s Idle stroke duration: 14 s Minimum window height: H = 800 mm Adjustable limit switch: 10-15-20-25-30-35-40 cm Electronics with an acoustic warning device to alarm for user in case of false assembly Service type S: 2 min Operating temperature
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Topp C20 – slim, beautifully shaped chain actuator, with double link chain , in a special housing, complete with holder and accessories for opening top-hung and pivot-hung windows (standard use), quick coupling at the window frame, white colour, with 1.3 m PVC connection cable, external switch to adjust stroke with locking device at 24 and 36 cm. C20 – suits top-hung and pivot-hung windows (standard use) as well as for dome lights and roof lights (use for vertical mounting) Specifications: Mains voltage: 230 V ~ 50 Hz Power consumption : 0,12 A Power consumed with load: 15 W Thrust and traction : 200 N Idling speed: 10 mm/s Idle stroke duration (360 mm): 36 s Length of working stroke: 240 / 360 mm Minimum window height (distance between actuator to window opening band): - with top-hung assembly 250 / 360 mm - with pivot-hung assembly 500 / 900 mm - with dome 300 / 400 mm Limit switch: electronic When opening service S 2: 4 min Operating temperature: -5°C/23°F +...
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
You did not find the item you were looking for? At Smolka-berlin.de you will get all Einhell spare parts which are available for delivery. If you have an order number, please type it into the search box on the left side of this web page using no blank spaces and no punctuation marks. If you know the type of operator, you can also type this into the above mentionned search box using again no blank spaces and no hyphens, e.g. taf351 or gta360 etc. (not together with spare part number). If this approach is not successful, please send us the operator's/spare part's order number and describe the spare part you are looking for (pictures are also very helpful). We will do our best to help you out!
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
DUCATI HC812-300 HC-300/CB, 300 mm stroke, self-locking, - only the drive unit. Stroke 300 mm
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
DUCATI HC812-300 electromechanical hinged door operator 12 V for light-weight 2-leaves gates up to 2.3 m leaf length. Effective working stroke 280 mm. Protection against accidents by cut-off in case of over-current. Scope of delivery: 2 drive units, 1 control with receiver, 2 manual transmitters and also a mounting bracket.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This torsion spring is turning right Wire diameter: 6 mm Inner diameter: 50 mm Convolutions: 119 The spring identification is labelled on the aluminium banneret of your old spring. In case the aluminium banneret is gone, in order to identify the correct torsion spring we need the following data which you please find on the type plate on the inner face of the door section.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This spring is turning left. Wire diameter: 5.5 mm Inner diameter: 50 mm convolutions : 112 Spring length approx 610 mm, measured in the relaxed state. The spring identification is labelled on the aluminium banneret of your old spring. In case the aluminium banneret is gone, in order to identify the correct torsion spring we need the following data which you please find on the type plate on the inner face of the door section.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
This spring is turning right, Wire diameter 5.5 mm Inner diameter 50 mm convolutions 112 The spring identification is labelled on the aluminium banneret of your old spring. In case the aluminium banneret is gone, in order to identify the correct torsion spring we need the following data which you please find on the type plate on the inner face of the door section.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Hörmann 3017818 top roller holder with a roller, LPU right side (interior view) You'll receive a replica made of steel, the original one is no longer available,
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Roller holder without wheel - other search number: 3012719
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Drive carriage, pilot carriage 150117 for Hörmann Marantec garage door drives GTS 30, GTS 35, GTS 40, GTS 100, GTD 55, GTD 50, GTD 60 , Comfort 130, Comfort 140, Comfort 150, Comfort 160 garage door drives
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Hörmann Roller bracket hinge 3017087 / 28156102 finally steel made, hot-dip galvanized, without eccentric and without wheel, LPU version right side (interior view). Now unbreakable.
Request for a quoteResults for
Access control - Import exportNumber of results
34 ProductsCountries
Company type