Wet processing - Import export

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

Proven special release agents for the production of concrete products by wet-cast process using either PE, PU or silicone moulds. Fast and easy release of concrete products from the mould, results in clean, uniform and almost flawless surfaces.

In the WTH 200.2, the following materials can be reliably brazed with active materials in a high vacuum. PCD (polycrystalline diamond) MKD (monocrystalline diamond) CVD diamond (chemical vapour deposition) PCBN (cubic boron nitride) and Hard metals as well Ceramics In the high-vacuum furnace WTH 200.2, our customers manufacture indexable inserts, dressing wheels, rotating tools and turning tools with blades made of natural diamond or MKD for polish turning. The vacuum brazing is flux-free. In the so-called active brazing process, titanium allows wetting of the surfaces. While cemented hard metals can also be inductively brazed, diamonds, CVD and ceramics must be actively brazed in a vacuum. When brazing PCD and PCBN, not only the hard metal substrate but also the PCD or PCBN layers are wetted.

Wet adhesive tape for stationary processing with a strip dispenser. With glass fibre reinforcement also suitable for heavy cartons.

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting

CMC TEXPAN's roller separators are very suitable for processing fresh and recycled wood; they oer high performance when processing wet or semi-wet wood materials. Their principle of operation is based on the rotation of a group of rollers provided with a specic prole or disc pattern; they are adequately spaced apart, whereby such spacing denes the particle size selected. The material is bouncing on the rollers to separate the fractions. Particles of a size smaller than the gap between the rollers pass through the roller spacing. Larger particles are conveyed by the rollers and discharged. The size of the desired fractions can be simply adjusted by changing the gaps between the rollers and/or by using rollers with dierent patterns. "SRD" type - for pre-crushed material "SRU" type - for all typical applications and numbers of fractions "SRO" type - for wet or dry strands

The knives of knife-ring akers have to be sharpened and re-set at regular intervals. This can be a very timeconsuming and personnel-intensive job. The quality and precision of these tasks depend strongly on the accuracy and dedication of the individual worker. With the sharpening and setting robot PZSE the knives can be sharpened and set automatically. Features, Function safety housing fully automatic process ow transport to and clamping of the knife ring to the carrier disc determining the wear of all parts automatic readjustment of all wear shoes and knives sharpening of all knives in a wet grinding process cleaning torque control of clamping bolts detection of possible damage to the threads Advantages automatic sharpening and setting process setting of the knives with high accuracy electronic control of tightening torque of the knife xing bolts automatic monitoring of the thread quality of the xing bolts preventative maintenance program thanks to PLC-controlled integrated

3DMicromac’s microMIRA™ LLO system provides highly uniform, force free lift off of different layers on wafers at high processing speed. The unique line beam system is built on a highly customizable platform that can incorporate different laser sources, wavelengths and beam paths to meet each customer’s unique requirements. The laser system can be used for a variety of applications, such as GaN lift off from glass and sapphire substrates in microLED display manufacturing as well as in semiconductor manufacturing. Additional applications include laser annealing and crystallization for surface modification. Force free and extremely fast line beam laser processing No damage due to thermo-mechanical effects Low production costs Elimination of costly and polluting wet chemical processes Integration of adjacent manufacturing steps for higher fab productivity

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

The knives of knife-ring flakers have to be sharpened and re-set at regular intervals. This can be a very time-consuming and personnel-intensive job. The quality and precision of these tasks depend strongly on the accuracy and dedication of the individual worker. With the sharpening and setting robot PZSE the knives can be sharpened and set automatically. Features, Function Safety housing Fully automatic process flow Transport to and clamping of the knife ring to the carrier disc Determining the wear of all parts Automatic readjustment of all wear shoes and knives Sharpening of all knives in a wet grinding process Cleaning Torque control of clamping bolts Detection of possible damage to the threads Advantages Automatic sharpening and setting process Setting of the knives with high accuracy Electronic control of tightening torque of the knife fixing bolts Automatic monitoring of the thread quality of the fixing bolts Preventative maintenance program thanks to...

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

Pressure transmitter PASCAL CV4 threaded connection, type series CV4100 Features Compact case of stainless steel in hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0.25 bar to 400 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Table function with up to 32 support points (in preparation) Wetted parts stainless steel Process connection: screw-in thread with internal diaphragm Options Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate per EN 10204 Calibration certificate per EN 102044

Multiventuri scrubbers are suitable for the separation of adhesive aerosols and for fine dust in humid waste air as these filtrating separations lead to adhesion, clogging and thus to irreversibel high filter resistance. In a wet separating process, the particles are washed out and thus cannot adhere. Reliable and automatic operation Automatic elutriation Automatic washing of separated elements Automatic discharge of the Ausschleusung der nicht absetzbaren ölhaltigen Stäube Level switch in pump sump Dry run protection Control of the nozzle inlet pressure Frost protection for outside installation Advantages Suitable for hot waste air Easy to maintain user interface Big flexibility with unsteady raw gas load Compact execution Durable construction Plant components made of corrosion and chemical resistant FRP 30 years of experience Active references of each size Worldwide delivery, installation and service