Stripping - Import export

An innovation for decorative applications is the stripe coating on our narrow Coil Coating line at First American. This is a complete coil coating process in which we are able to leave tightly toleranced, unpainted stripes on the carrier strip. These give the decorative effect to the finished article, while the coated areas are coated with an adhesive system (e.g. automotive trim material or white coating with a defined black stripe, etc.). As always, all metal strips available on the market can be used as metal carriers; all coatings can also be used. This leads to a smart product, allowing you a multitude of new, innovative applications.

Our special ability lies in the processing of metal strips pre-coated with adhesives. With this material it is particularly important not to damage the surface mechanically whilst at the same time not to impair the ability to bond. This skill enables us to supply stamped parts for bonding with rubber and/or thermoplastics, such as Vibration damping elements spring elements stabilizers functional parts components We guarantee a functional workability of the product for 6 months after delivery.

Our ACP Group offers over 400 different variants of stamped and lanced metal carriers. These carriers are used in a wide variety of sealing systems. Only high-quality raw materials such as steel, aluminium and stainless steel from certified suppliers are used for production. The Huehoco Group also offers a wide range of coating options. From functional to decorative coatings, our customers can choose from a wide range of products. We offer suitable bonding agents for almost all types of rubber and plastic compounds.

State-of-the-art technology and extensive knowledge in the processing of steel characterise our location in Bad Salzungen, Germany. For us, performance means a wide range of cold-rolled steels of the highest quality at competitive prices, flexibility and a high degree of readiness to deliver while adhering precisely to the specified chemical and mechanical values. Surface finishing by electrolytic galvanizing and/or subsequent customisation of your goods are possible for us. We offer all our customers spooled materials with volumes of over 200,000 metres of metal strip per spool. This further development means a considerable advantage for our customers. Personnel-intensive set-up times and machine downtimes are avoided.

maximum weight reduction high design flexibility predetermined breaking points can be defined

very flexible over three axes Stretch values up to >40%. high compression ratio

Stretching up to 100 % possible very light version large variety of designs

Single Spine / Einstegig extremely flexible over three axes predetermined breaking points can be defined Free choice of spine width and positioning Double Spine / Two-webbed reduced "hungry horse" effect predetermined breaking points can be defined Free choice of spine width and positioning

Our tasks also include joint process optimization with our customers in order to enable more efficient production and thus a reduction in set-up and downtimes. Our spooling systems are a good example of this type of cooperation and continuous further development. We connect the strips using state-of-the-art welding technology and rewind them oscillating on a variety of spools Strip widths from 1.5 mm up to 60 mm Extension of the strip length to more than 200,000 meters in one strip depending on the material Individual laying widths from 100 to 400 mm Special decoiling racks with decoiling widths of 800 mm and maximum decoiling weights of 2,500 kg

In the field of plastics we offer metal strips with PVC plastisol and/or organosol coatings, as well as polyamide plastics. PP (polypropylene), PE (polyethylene), PC (polycarbonate), PET (polyethylene terephthalate) and PLA (polyactide), TPE (thermoplastic elastomer), TPU (thermoplastic polyurethane) and others. These can be produced with a layer thickness of 5-200 μm Depending on the plastic, higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.

Our rubber-coated metal strips are used in numerous applications, such as engine and aggregate seals. In addition to NBR, we also coat metal strip with EPDM, NR, HNBR and FPM in thicknesses of 10 μm - 2 mm. The metal strips can also be coated with an anti-friction coating, which offers extremely high resistance to heat and special sliding ability. The resulting further processing quality enables them to be used wherever parts made of metal strip with sealing, sound-absorbing or vibration-damping properties are required. The very good bonding between elastomer and metal, combined with outstanding deep-drawing properties, shows the superiority of this coating. The metal strips can also be top-coated with decorative lacquers on both the metal and the rubber coated side (e.g. as a distinguishing feature in the company's own production for top and bottom sides).

Our tasks also include joint process optimization with our customers in order to enable more efficient production and thus a reduction in set-up and downtimes. Our spooling systems are a good example of this type of cooperation and continuous further development. We connect the strips using state-of-the-art welding technology and rewind them oscillating on a variety of spools Strip widths from 1.5 mm up to 60 mm Extension of the strip length to more than 200,000 meters in one strip depending on the material Individual laying widths from 100 to 400 mm Special decoiling racks with decoiling widths of 800 mm and maximum decoiling weights of 2,500 kg

In addition to the product range of classic cold rolling mills, we can also offer our customers electrolytically galvanized strip. The zinc coating offers excellent corrosion protection: In cooperation with our customers, we have developed a product that solves the problem of zinc abrasion in the processing of galvanized strips - ZPL (Zinc Plus Paint). An organic coating system is applied immediately after electrolytic galvanizing. This results in a colourless, uniform, highly lubricious layer with a dry film thickness of 0.50 - 3.00 µm, which can of course also be supplied in any desired colour. ZPL offers the following advantages: Further improvement of corrosion protection Excellent sliding properties, preventing zinc abrasion in the tool Reduced tool wear Longer tool life Oil-free processing is made possible Coating and printable layer with "Anti Finger Print" properties

Spring steel is a model of load-bearing capacity. Characteristic for this material group are homogeneous microstructures and optimal surfaces. It stands for above-average service life, dimensional stability and constant quality in every end product. Spring steel obtains its special properties through special treatment in the production process, whereby the even distribution of the carbon content is of particular importance. It undergoes several rolling processes and repeated heat treatments in numerous work steps - this is how we guarantee optimum quality for your products! C 67 S - C 100 S/➔ according to DIN EN 10132 - 4 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

This material group comprises C-steel with low carbon content, good formability and fineblanking quality. Due to case hardening, the components have low-wear surface layers with high hardness and sufficient toughness in the core. They thus combine numerous properties and application possibilities in a wide variety of industries. To increase the wear resistance, you can also carburize or carbonitrate partial areas. C 10 E, C 15 E /➔ according to DIN EN 10132 - 2 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

Cold rolled strip is used in a variety of applications. It meets high demands on forming behaviour, dimensional tolerances and surface finish, which offers our customers decisive advantages! HFP cold rolled strip is ideally suited for all stamping, bending, drawing and deep drawing purposes. From ball bearing housings to roll cutting and punching strips, hose clamps, headlight reflectors, electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

Cable Stripping Tools Sheat Peeling Tools