Heads - Import export

Hydraulic Crimping Heads

P-131-C26 - hydraulic crimping head, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) opening jaw: 26 mm Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

P-60-CK - hydraulic crimping head, 60 kN, CU300mm² for exchangeable dies series "60-CK", "22" for connecting with an hydraulic pump working pressure: 700 bar (10.000 PSI) Characteristics Single acting hydraulic head for connecting at a hydraulic pump Quick coupler system CEJN series 115 with dust protection cap for changeable compression dies NEW! The P-131 series with mechanical stop. Mo demage by using without dies!

With SaveCost C, the parameterized hardness limit value is monitored in the range from 1 ppm to 18 ppm and the regeneration of the columns is triggered on the CLACK® control head if necessary. In addition to more operational safety, the softener generates up to 160% more soft water with less flushing water and salt. This also reduces operating costs by up to 60%. Monitoring and control is carried out on CLACK® control heads with the TWIN models; WS 1.0; WS 1.5; WS 2.0 and WS 3.0. With the integrated hardness sensor, the amount of soft water produced is monitored and forced regeneration is triggered when capacity is exhausted. The additional yield of soft water and the number of regenerations are displayed. In addition to the automatic self-monitoring, a chronological storage of operating data is integrated in the electronic operating diary (USB stick). A LAN data interface (Modbus) is available as an option.

Description spindle extension SV-560/X P=30 kW, n=5,000 RPM, M=850 Nm Construction principle: - intention spindle stationary - Eccentricity: 160 mm - SK 50 with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Transmission gear: 1 : 1 - Manufactured length (up to spindle centre): 560 mm - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - right angularity : 0.020 mm

Description Two-axis NC positioning milling head KFU-NC3/45/X P=30 kW, n=5,000 RPM, M=850 Nm C-Axis / Axis 1 (upper NC-swivelling axis -90°) - working range: ± 185º Load data: - safe clamping torque: 6,500 Nm - max. speed: 6.25 RPM - dividing accuracy: ± 5" A-Axis / Axis 2 (NC clevis swivelling axis -45°) - working range: ± 185° Load data: - safe clamping torque: 3,000 Nm - max. speed: 6.25 RPM - dividing accuracy: ± 5"

Description manual single-axis milling head KF-2/90 P=15 kW, n=1,500 RPM, M=500 Nm Construction principle: - Positioning and clamping: manual - SK 50 without automatic tool clamping - with external coolant supply - Lubrication: grease lubrication - Transmission gear: 1.68 : 1 - Manufactured length (up to spindle centre): 750 mm - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description manual single-axis milling head KF-1/90 P=7 kW, n=3,500 RPM, M=150 Nm Construction principle: - Positioning and clamping: manual - SK 40 without automatic tool clamping - with external coolant supply - Lubrication: grease lubrication - Transmission gear: 1 : 1 - Manufactured length (up to spindle centre): 495 mm / 645 mm - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D2/90 P=13 kW, n=1,500 RPM, M=400 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 with automatic tool clamping - with external coolant supply - Lubrication: grease lubrication A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=315 mm : 0.030 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D8/90/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D8/45/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D8/90/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D5/90/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D5/45/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D5/90/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D4/90/X P=40 kW, n=5,000 RPM, M=1,200 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D4/45/X P=40 kW, n=5,000 RPM, M=1,200 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D3/45/X P=30 kW, n=5,000 RPM, M=800 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D4/90/X P=30 kW, n=5,000 RPM, M=1,000 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 9,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description Two-axis NC clevis milling head prepared for motor spindle KFU/M3/90-NC4 P=50 kW, n=10,000 RPM, M=290 Nm C-Axis / Axis 1 (upper NC-swivelling axis) - working range: ± 185º Load data: - max. torque: 2,800 Nm - safe clamping torque: 6,000 Nm - max. speed: 6.25 RPM A-Axis / Axis 2 (NC clevis swivelling axis) - working range: ± 95° Load data: - max. torque: 1,250 Nm - safe clamping torque: 6,000 Nm - max. speed: 6.25 RPM

Description Two-axis NC clevis milling head prepared for motor spindle KFU/M2/90-NC3 P=30 kW, n=15,000 RPM, M=100 Nm C-Axis / Axis 1 (upper NC-swivelling axis) - working range: ± 180º Load data: - max. torque: 3,000 Nm - safe clamping torque: 7,000 Nm - max. speed: 16.6 RPM A-Axis / Axis 2 (NC clevis swivelling axis) - working range: ± 95° Load data: - max. torque: 650 Nm - safe clamping torque: 4,800 Nm - max. speed: 13.8 RPM

Description Two-axis NC clevis milling head prepared for motor spindle KFU/M1/90-NC1 P=12.5 kW, n=12,000 RPM, M=50 Nm C-Axis / Axis 1 (upper NC-swivelling axis) - working range: ± 180º Load data: - max. torque: 1,250 Nm - safe clamping torque: 3,000 Nm - max. speed: 12.5 RPM A-Axis / Axis 2 (NC clevis swivelling axis) - working range: -90° up to +120° Load data: - max. torque: 240 Nm - safe clamping torque: 700 Nm - max. speed: 27.7 RPM

Description Single-axis NC milling head prepared for motor spindle KF/M2/90-NC5 P=68 kW, n=10,000 RPM C-axis (NC-clevis-swivel axis): - working range: ± 90° Accuracy: - dividing accuracy: in angular seconds ± 6 - repeatability: in angular seconds ± 1 Load data: - safe mass moment of inertia issuing from transportation load: 40 kgm² - safe tangential stress (at 63 bar lock pressure): 4,200 Nm - safe tilting moment: 6,300 Nm - safe torque to be transmitted by worm gear: 2,500 Nm

Description Single-axis NC clevis milling head prepared for motor spindle KF/M2/90-NC3 P=37 kW, n=12,000 RPM A-axis (NC-clevis-swivel axis): - working range: ± 110° Accuracy: - dividing accuracy: in angular seconds ± 5 - repeatability: in angular seconds ± 1 Load data: - safe mass moment of inertia issuing from transportation load: 20 kgm² - safe tangential stress (at 63 bar lock pressure): 2,400 Nm - safe tilting moment: 2,000 Nm - safe torque to be transmitted by worm gear: 650 Nm

Description Two-axis NC clevis milling head KFU-NC6/90 P=60 kW, n=2,000 RPM, M=2,000 Nm C-Axis / Axis 1 (upper NC-swivelling axis -90°) - working range: ± 185º Load data: - max. torque: 4,000 Nm - safe clamping torque: 10,000 Nm - max. speed: 3.57 RPM - dividing accuracy: ± 5" A-Axis / Axis 2 (NC clevis swivelling axis -90°) - working range: ± 95° Load data: - max. torque: 3,000 Nm - safe clamping torque: 5,500 Nm - max. speed: 4.29 RPM - dividing accuracy: ± 7"

Description Two-axis NC clevis milling head KFU-NC4/90 P=37 kW, n=3,000 RPM, M=800 Nm C-Axis / Axis 1 (upper NC-swivelling axis -90°) - working range: ± 185º Load data: - max. torque: 6,000 Nm - safe clamping torque: 3,400 Nm - max. speed: 3.57 RPM - dividing accuracy: ± 5" A-Axis / Axis 2 (NC clevis swivelling axis -90°) - working range: ± 95° Load data: - max. torque: 2,050 Nm - safe clamping torque: 5,000 Nm - max. speed: 3.33 RPM - dividing accuracy: ± 5"

Description Two-axis universal milling head/manual KFU-4/45 P=37 kW, n=3,000 RPM, M=1,000 Nm, SK 50 Construction principle: Two-axis milling head with automatic tool clamping Swivle axis: - Position to the bolting surface: 45º - Swivel range: 360º - Reading accuracy: 2 angular minutes Load data: - max. speed: 3,000 RPM (constant) - max torque: 1,000 Nm (constant) up to n=294 RPM - max power capable of being transmitted: 37 kW (constant) at 294 RPM Accuracy: - True running of the inner taper of he milling spindle in plane A and plane B as per DIN 8601 measuring point 1 l=15 mm 0.010 mm measuring point 2 l=300 mm 0.020 mm - Parallelism of the milling spindle rotation axis to the milling head's screw-down surface during swivelling through axis (A-A) as per DIN 8601 0.020/300 mm/mm - Rectangularity of milling spindle axis to scew-down surface (45º planes) 0.020/300 mm/mm

Description Two-axis universal milling head/manual KFU-2/45 P=15 kW, n=3,150 RPM, M=600 Nm, SK 50 Construction principle: Two-axis milling head with automatic tool clamping Swivle axis: - Position to the bolting surface: 45º - Swivel range: 360º - Reading accuracy: 2 angular minutes Load data: - max. speed: 3,000 RPM (constant) - max torque: 1,000 Nm (constant) up to n=294 RPM - max power capable of being transmitted: 37 kW (constant) at 294 RPM Accuracy: - True running of the inner taper of he milling spindle in plane A and plane B as per DIN 8601 measuring point 1 l=15 mm 0.010 mm measuring point 2 l=300 mm 0.020 mm - Parallelism of the milling spindle rotation axis to the milling head's screw-down surface during swivelling through axis (A-A) as per DIN 8601 0.020/300 mm/mm - Rectangularity of milling spindle axis to scew-down surface (45º planes) 0.020/300 mm/mm

Description Two-axis NC clevis milling head prepared for motor spindle KFU/M10/90-NC5 P=100 kW, n=8,000 RPM, M=395 Nm C-Axis / Axis 1 (upper NC-swivelling axis) - working range: ± 180º Load data: - max. torque: 4,200 Nm - safe clamping torque: 12,000 Nm - max. speed: 6.25 RPM A-Axis / Axis 2 (NC clevis swivelling axis) - working range: ± 95° Load data: - max. torque: 2,500 Nm - safe clamping torque: 8,400 Nm - max. speed: 6.6 RPM