Water proofing - Import export

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

Aqua-non AGOFORM's water-proof mats offer the ideal protection against leaks and liquids running out in the sink area. The special semi-spherical shape on the surface allows up to 6 litres of liquid per sq.m to be collected. Removing and cleaning the mat is quick and easy thanks to the special design. The product is available in standard cut sizes of 2000 x 580 mm as well as in special cut sizes for any required format (corner solutions, centre posts) for any carcase dimensions.

The water pressure-proof UVC-SE sensors serve as robust, long-term stable measuring heads for the precise measurement of UV-C irradiances of low-pressure mercury lamps and amalgam lamps in water disinfection and wastewater systems. The sensor can be exposed to pressure of up to 10 bar. A long-term, stable high-sensitivity photo diode with a large active area of 1 cm² is used. This provides low noise and improved sensitivity, below 260 nm, compared to SIC sensors. Superior corrosion resistance and long-term stability is also achieved through the use of appropriate materials. No aging is determined over a period of one year. The sensors are calibrated with traceability to the PTB, the German national test authority. The integrated electronics produce a signal voltage that is transmitted to the PLC or panel meter RM-32, so that inferences are minimized. Operating voltage and output signal can be selected to match the measurement task or PLC interfaces.

The water-proof sensor UVX-SE serves as robust, long-term stable measuring heads for the precise measurement of UV irradiances in production lines, that have to be wet cleaned. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority) and can be exposed to pressure of up to 10 bar. The sensors are available in eight spectral ranges and two measuring ranges. This allows the sensors to be optimally adapted for the application. The integrated electronics produce a signal that is transmitted to the PLC or panel meter, so that inferences are minimized. Operating voltage and output signal can be selected to match the measurement task or PLC interfaces. For small control tasks, the sensor UVX-SE can be connected to RM-32, which shows current irradiance on a 3.5-digit digital display and switches two relay contacts with adjustable warning and alarm signals.

The patented gwk solution includes cold water temperature controllers that can be operated without glycol in the temperature range between 0 °C and 25 °C. The user can select between two models that are differing in cooling capacity and flow rate. A precise microprocessor control with simultaneous indication of nominal and actual value, the simple one-touch operation, optional interfaces at the front panel and external sensor connection, splash-water proofed electrics and the cabling with CEE-socket ready for connection make the unit ready for immediate use. Leak stop operation, mould draining, acoustic alarm, automatic filling and top up, additional manual filling possibility for conditioned water, strainer in the cooling water connection and parts out of corrosion resistant materials that are in contact with the medium are part of the comprehensive standard equipment.

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

The ITT Cannon CA-COM and CA-COM-B series connectors are enhancements of the legendary CA series for specific market needs. They were developed particularly for industrial application and impress with their superior contact technology. These are water-proof connectors that are completely sealed and insensitive to condensation, vibration and contamination. The connectors of both CA- series can be replaced with the corresponding types according to MIL-C-5015 or VG95234, as mounting dimensions and layouts are the same. RoHS compliant

Simply usable without encapsulation In addition to the standard version, many actuators are also available as water-proof, splash-proof or dust-proof models. While pneumatic actuators are only safe enough after extensive encapsulation, IAI's IP-protected actuators can be used without any further construction measures. There is no risk of leakage here. The uncomplicated installation without additional units and the small space requirement significantly reduce the costs and time required for commissioning.

Suitable for full care of any water-proof floors and coats, i.e. sealed parquet, cork, PVC, linoleum, laminate, natural and artificial stone floors as well as tiles and rubber floors. Floor Shine is suitable for both polishing initial treatment as well as continued maintenance when added to mopping water.

A specialized product that was developed for installing ignition elements and insulating them from the environment. Expansion of the inner diameter is also possible with longer components. For embedding other components, special gas and water-proof adhesives are available, which also retain their properties at high temperatures.

Riga Deck Product Birch plywood (Riga Ply) overlaid with a black glass fiber on one face. The reverse face usually is smooth (F).The wear face has a special surface pattern (WT). Application Flight cases, steps of stairs, floor covering, loading platforms, exhibition stands, vehicle floors, children playgrounds. In general - surface where high wear-impact resistance and pleasant visual appearance are required. Advantages Decorative surface with high wear resistance, weather- and water-proof, resists commonly used chemicals and easy-to-clean. Durable and easily workable . In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 9, 12, 15, 18, 21, 24, 27, 30, 35

Riga Mel Birch plywood ( Riga Ply) overlaid with a white melamine film on both faces (grade M/M); reverse face can be overlaid with a phenol film. Advantages The surface is hygienic, odour free, weather- and water-proof, resists commonly used chemicals and UV rays. The surface is easy-to-clean with water and steam. Applications Transport industry: finishing of walls and ceilings; furniture components and table tops, shop fitting and exhibition stands and booths, advertisement and information boards. Surface overlay The surface is smooth, glossy and hard. Nevertheless, it may easily crack in case of hard impacts. Sizes 1220 mm x 2440 mm (thickness: 6.5 - 35 mm) 1250 mm x 2500 mm (thickness: 6.5 - 35 mm) 1220 mm x 3050 mm 1250 mm x 3000 mm 1500 mm x 2500 / 3000 mm 1525 mm x 2440 / 3050 mm Cut-to-size panels and machined panels available in accordance with the customers’ requirements. Thicknesses 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, 45, 50 mm.

The robust, water-proof and impact-resistant construction in combination with easy readable display of Detective+ of Crowcon is a ideal device for portable gas detector For monitoring of a bigger area, up to 12 Detective+ can be connected, whereby in case of alarm of one device all devices will be activated! Easy detection of several gases (up to 4) and due to installation of infrared-sensors (optionally available) sampling of potential high-flammable gases and carbon dioxide is possible! Infrared-sensors are not affected in cases of poisoning of other sensors! Detective+ is based on the successful, worldwide over 55.000 devices sold “Triple Plus”- gas detector! Features of Detective+ Integrated pump (optional) offers rapid response and additional sensor protection Easy readable display Up to 60 hrs. battery operation Very bright red LED-groups provide optival alarm display Extremely loud acoustically alarm tone by emitting siren in all directions (104 dBA @ 1 meter) Sensors...

The MED-approved (wheel) SOLAS person marking light (PML) is a special emergency lighting for life vests. PML is a special emergency lighting for sailors, surfer, and divers (depth up to 100m) with a duration of 8 hours. It is used by French marine and American cost guards, as well. SOLAS PML is particularly suitable for hard-shell jackets and can be easily fixed with the help of clamping device. The Cyalume developed emergency lighting offers special features. It consists of two independent light sources. The white flashing light starts automatically by contact with water; as well it can be activated manually. The burning time amounts to approx. 8 hours. Afterwards, chemical lighting source can be activated through breaking the black protective cover. The chemical light source (green light) has also a burning time of 8 hours, water-proof and durable for 4 years. All chemical light sources are non-toxic and do no pollute the environment! Datenblatt

General QJ/QJR Submersible Borehole Pump (Deep Well Pump) designed for pumping clean water from deep wells, rivers, reservoirs and mines etc., as well as applications in industrial water supply , agricultural irrigation projects. Fire fighting and so on. QJR is specially designed for geothermal applications featured by heat-resisting, anti-corrosion and anti-aging properties, water temperature up to 90℃ Construction & Features Compact vertical centrifugal multi-stage design with perfect standardization and generalization, easy operation and convenient maintenance. A complete electric submersible pump includes a water pump set, electric motor, a discharge piping, water-proof cable and a control panel. Submersible motor filled with clean water for cooling and lubrication. And the pressure regulation switch, located at the bottom of motor, shall automatically operate to balance the pressure fluctuation caused by temperature variations.