Wall plates - Import export

Wall plates for 2-liter-cartridges, for lotion pumps wall plate, black wall plate, white

for foam, lotion or spray pumps Measurements in mm (W x H x D): 85 x 230 x 105 Wall plate for foam pump, black Wall plate for foam pump, white Wall plate for foam pump, silver

premounted wall plate | plate is expandable Only plate: dispensers are not included in delivery!

ABS | lockable | detachable wall plate | brake function Measurements in mm (W x H x D): 155 x 325 x 175

ABS | detachable wall plate | for 1.000 ml foam soap cartridges Measurements in mm (W x H x D): 105 x 240 x 120

ABS | detachable wall plate | Sensor | for 1.000 ml foam soap cartridges Measurements in mm (W x H x D): 105 x 250 x 120

ABS | lockable | detachable wall plate | Autocut | push lever Measurements in mm (W x H x D): 320 x 430 x 210 Auch in diesen Farben erhältlich:

ABS | lockable | detachable wall plate | Sensor | for 4 x D 1,5 V Batteries Measurements in mm (W x H x D): 320 x 430 x 210 4 x Duracell D 1.5 V batteries are included in the scope of delivery Datasheeet

Hygienic dosage of liquid soaps, lotions, disinfection agents, etc | easy filling from canisters or with 500 ml bottles | for cleaning remove it from the wall plate with only one turn of the hand | very robust and lockable Measurements in mm (W x H x D): 95 x 260 x 185 Contents: 500 ml Cover: white-transparent Dosage dispenser, stainless steel Dosage dispenser, aluminium Dosage dispenser, ABS

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, silver, with drip tray Universal Arm Lever Dispenser, ABS, silver 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, white, with drip tray Universal Arm Lever Dispenser, ABS, white 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

Individually manufactured for you - special designs without length limitation This sealing type is mostly used in tank construction, where they seal the gap between the tank wall and the longitudinal separator plate. Correct use of the baffle seal can significantly reduce power losses in heat exchangers. The sealing effect is achieved by 4 spring lamellas each, which are mounted fan-like in the support profile.

Wall bracket, width 210 mm, heavy-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 90 mm Width: 210 mm Load capacity: 5.5 kN Make: OBO Bettermann Type: AW 55 21 FT

Wall bracket, width 210 mm, light-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimension: 210 x 60 mm Width: 210 mm Load capacity: 1.5 kN Make: OBO Bettermann Type: AW 15 21 FT Item no. : 6420680 Make: OBO Bettermann Type: MWA 12 21S FS Item no. : 6424732

Wall bracket, width 210 mm, medium-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 70 mm Width: 210 mm Load capacity: 3 kN Make: OBO Bettermann Type: AW 30 21 FT Item no. : 6419720

You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard Intelligent Gas Sensors for AsH 3, Cl 2, ClO 2, CO, COCl 2, H 2, H 2S, HCl, HCN, HF, N 2H 4, NH 3, NO 2, O 2, O 3, PH 3 and SO 2 The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the Art components (hardware and software), smart sensor technology, “heartbeat” sensor control and complete system diagnostics on board. What makes the Statox 505 so reliable? In process monitoring, the status of plant components in case of a failure is becoming more and more a critical issue. The standards DIN EN 61508 as well as the product standard DIN EN 50402 are powerful tools to calculate the probability of a failure on demand. The Statox 505 complies with all of the requirements of these standards. It obtained the safety integrity level SIL 2. This provides a reliable database for the user to calculate the safety standard of his plant. If the Statox 505 is operated as a SIL 2 component, a so called “proof test” in certain time intervals is mandatory. All OK All important parameters such as sensor „heartbeat“, signal output, calibration, zero, sensitivity, temperature, sensor memory, amplifier, CPU, power supply etc. are continuously monitored for proper function. In case of a failure, an alarm will be triggered. Thus the system cannot fail without the error being noticed. A green LED signalizes the system status. The display and the controls are located at the inside of the housing - well protected from the elements. Minimum time and work in the field The sensors of the Statox 505 are plug and play technology. Each sensor has a F-RAM on board which communicates all relevant parameters to the sensor head: Gas, measuring range, last calibration, ex works calibration, response time etc. The sensors can easily be calibrated in the shop. For the user this means that he never ever will have to do calibration work in the harsh elements (wind, rain, cold, heat). No more lugging heavy test equipment and gas cylinders into the field. All the user has to do in the field, is plug the sensor back in. To do that, you don`t even need a tool! While the sensor is getting calibrated in the shop, the sensor cartridge stays in place and protects the sensor head from dust and rain. Trouble- free wall - or pipe mounting The Statox 505 comes with a mounting plate for either wall - or pipe mounting. No need to open the sensor head for plant installation Storage temperature

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

Hinged support rail in stainless steel (AISI 304), outer diameter of tubes 32 mm, surface satin finished. Full metal hinge with individually adjustable brake. Wall mountings with 6point mounting plate, 90 x 250 x 4 mm, and with 2Kwall sealingdisc; supports weight up to 125 kg. Fastening concealed by selflocking wall cover. TÜVcertified in accordance with DIN EN 12182, CEmarked in accordance with 93/42 EEC. Length ...... mm

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.