Voltage converters - Import export

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

Displacement and all mechanical values which can be converted to displacements (e.g. compressive and tensile force, strain, torque and vibration) may be measured by this DC/DC displacement sensor. Typical application areas are the measurement of displacement and strain on machines, servo systems, vehicles, on test plants, in civil engineering and tunnel construction. An integrated maintenance-free electronic and a high-level DC output signal provide an easy handling without any problems. Displacement sensors of series 87240 convert a displacement into an analog electrical signal. They consist of a differential transformer with moveable core, an oscillator and a demodulator. These components are integrated and encapsulated in a cylindrical housing made of stainless steel. The sensors are energized by DC voltage, which is converted to AC by the oscillator and brought to the primary coil of differential transformer.

The sensor element consists of a double bending beam with applied strain gages. Changes in the ohmic resistance of the strain gage fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol. The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads). Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation.

The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material. The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop. FEATURES Measuring ranges from 0 … 20 N to 0 … 880 N Relative non-linearity: ±0.25 % F.S. Many load cycles Protection class IP54 Excellent price-performance ratio burster TEDS optionally available

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

Ultrasonic converters, also called transducers or oscillators, convert highfrequency electrical voltage generated by ultrasonic generators into a mechanical vibration of the same frequency. The piezoelectric effect is used here. The ultrasonic converter forms the starting point of the oscillation system and transmits the vibration to the booster and sonotrode. Our soniKKs converters captivate with their compact design, reliability and durability. As all our products, they are also "Made in Germany". The resonant body is made of titanium or steel. We are also happy to manufacture special converters and housings according to your needs. Your Advantages “Made in Germany” Compact design High reliability, durability, and costeffectiveness Production of special converters/housings on request Resonance base body made of titanium or steel Also suitable for the food and pharmaceutical industry

Mercedes-Benz Auxiliary Battery “Voltage Converter” Genuine Part Number: A 205 905 34 14 Offer Price 75€ The Goods are O.E and Packed in O.E Packages.