Variable speed drives - Import export

ideally suited for large coil widths and thicknesses dual arbors for minimal deflection hydraulic wedge type expansion systems highestquality Reel Arbor with maintenancefree bearing and minimal deflection integrated hydraulically powered coil loading system for narrower coils even onesided use possible coil reels as seperate movable components proven support of large rollforming applications especially for the manufacture of welded tubes SHZR Series with variable speed drives via threephase motors and frequency inverter

PROFI 6 TI Subsea JDN Subsea Hoists The ultimate tool for every professional diver PROFI subsea hoists are a versatile and indispensable tool for professional divers and are suitable for horizontal work as well as for oblique pulling. Advantages Air or hydraulic drive Infinitely variable speeds can be regulated sensitively With overload protection Very versatile, also suitable for horizontal and oblique pulling thanks to hook suspension

The GRV series can be used in versatile manner. It is equipped with a mechanically variable speed variation drive with drive ratings of up to 11.0 kW. Furthermore it can be supplied with geared drives that have a standard output speed of between 1 and 1,750 rpm. The speed is adjustable with a hand wheel. The agitator shaft of the GRV series geared agitator is directly mounted on the shaft of the mechanical speed variator or with additional speed reduction (all before mentioned solutions possible). The agitator shafts are balanced for concentric run after assembly of the mixer. According to the specific mixing task, the GRV series can be supplied with matching mixing elements and various seals.

The LRD series top-entry sealed agitator can be used for mixing in closed containers with a mechanical seal. It is designed with a coupling housing. The agitator shaft is borne in the bearing housing and the mechanical seal (single- or double-acting). The seal can be exchanged without dismantling the mixer from the tank (also in case of a side entry). Drives with shaft journals for LRD series: Three-phase motor Helical geared drive unit Parallel shaft geared drive unit Variable speed geared drive unit Helical bevel geared drive unit According to the tank size, the LRD series agitator is available in four different frame sizes. Shaft diameters of 30 mm to 90 mm and shaft lengths of up to 10,500 mm are feasible. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3). Pharmaceutical version with FDA and GMP feasible.

GRV - Geared agitator with variable speed gear unit The GRV series can be used in versatile manner. It is equipped with a mechanically variable speed variation drive with drive ratings of up to 11.0 kW. Furthermore it can be supplied with geared drives that have a standard output speed of between 1 and 1,750 rpm. The speed is adjustable with a hand wheel. The agitator shaft of the GRV series geared agitator is directly mounted on the shaft of the mechanical speed variator or with additional speed reduction (all before mentioned solutions possible). The agitator shafts are balanced for concentric run after assembly of the mixer. According to the specific mixing task, the GRV series can be supplied with matching mixing elements and various seals.

A consumer whose load includes a high proportion of variable speed motor drives and/or other harmonic generating loads may require a detuned capacitor system. This would perform the function of power factor improvement whilst preventing any amplification of harmonic currents and voltages caused by resonance between capacitors and inductances in the mains. Our low-loss reactors are designed for such systems. They are available with adjusted (Dla) and fixed ratings (D): The adjusted reactor is designed to create exactly the required output of reactive power, allowing for the internal voltage rise inside the resonating circuit formed together with the capacitor connected in the circuit. Note that exact sizing of the capacitor is necessary.

With the FPM (once F&G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Compact Drives Have you ever been faced with the situation where the drive speed cannot be changed, because an explosion-proof motor is used and installation of a frequency inverter in the electrical control room is too complex? The solution is a motor with an integral frequency inverter! Compact motor type CD 112 M-4I. With this design, the motor can be directly installed and the drive speed can be controlled Voltage: 380 to 500 V Performance range 0,55 - 11 kW Variable speed drive system for use in Zone1 with explosive atmospheres Spatial integration of flameproof enclosed motors (CD series) in a standard version with specially adapted frequency inverters derived from mass produced standard models Resonance effects in the drive incomers are avoided by spatial integration, as only one sinusoidal supply connection is available. This means that filtering which is required for installation of an external inverter is not required This drive fulfills the highest demands in the area of control engineering, with overload, smooth running, etc., as a result of the vector control technology applied The integrated PID controller simplifies the closed-loop process control The Bus technology which is available allows optimum adaption to suit the work process. The frequency inverter module can be retrofitted for all PTC thermistor motors of the CD series, from frame size 80 - 112 The fixing dimensions are standardized. It is therefore possible to exchange the motors (for example Ex e) with this compact drive in many applications The payback on investment is achieved by the savings in energy costs Mechanical control with throttle valve controls or bypasses can be easily replaced. The efficieny of your installation improves significantly