Used cases - Import export

THIESE ARE SOME EXAMPLES OF BOTTLES THAT CAN BE COMBINED WITH DISPENSER PUMPS. Please give us a call in case you need assistance in finding your perfect combination of a dispenser pump and a bottle: +49 821 56876-330

high blowing power at significantly reduced consumption of compressed air and lower noise development for every case of use the right passage ideal for blowing out punch parts Heat Resistance 90° C

Good formability and conductivity make our products useful for condenser case products produced via drawing processes. Manufacturers of these aluminum case applications rely on Novelis to provide high-quality aluminum coils or sheet in alloys such as 1050 and 3004. Novelis produces pre-painted aluminum for scales, dials and nameplates in laser engraving quality, in the form of a surface-treated coil or sheet. Specialized coatings are applied by rollers. Printing is possible via standard commercial inks and paints with no special materials required.

Circular brushes are defined as brushes with a body length of up to 100 mm. The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrate the versability of Kullen-Koti again and again. As a matter of course it is more economical to use our standard dimensions for the brush cores. You will get your brushes in shorter time and for a lower price. Special models, for example with special fill configurations, core forms, axial hole with feather key groove, feather key dowel hole and collet thread or ball bearing are no problem for us. In case of special brushes, we would like to ask you to send us a drawing or simply discuss your requirements with our technical consultant. The max. circumferential speed for this brush type is 15 m/sec. Fill material densities High fill densty EA1, normal fill density EA2, low fill density EA3. Fill configuration In addition to a full fill configuration in three densities, we also produce circular brushes...

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie outside material: 2.4610 inside material: PTFE (s=5mm) DP 10 bar DT 230° C ax. mov. +/-30 mm

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Thanks to their fabric design, Siegling Transilon curved belts are exceptionally flexible, both laterally and longitudinally, ensuring an optimal distribution of forces within the belt. Depending on the application, either conical or cylindrical drums are used, or in some cases even knife edges or rolling knife edges. Curved belts can be fabricated from one or more segments. Fabrication from several segments improves the distribution of forces within the belt. Curved belts can be equipped with perforations or eyelets along the edges so they can be attached to tracking systems later on.

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie chamber expansion joints DN50 / DN150 / DN200 DP inside 6 bar DP outside 4,5 bar DT 155° C ax. mov. +/-15 mm lat. mov. +/-10 mm

Short description: With double syringe This transparent adhesive retains elasticity after curing and is ideal for jobs in construction and assembly and in fact in all cases where the use of WEICON Easy-Mix Systems would not be efficient. Viscid, self-levelling, very short pot life (3 - 4 minutes), fast-curing, almost colourless, glass clear. WEICON Epoxy Minute Adhesive is especially suitable for occasionally necessary repair and maintenance works. It is applied by using the practical double syringe. This means that resin and hardener are delivered automatically in the right proportions. After this, the mixing is done manually.

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Construction and operation mode AViTEQ Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf sprin

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Bowl and drive selection The normal shape of the bowls is cylindrical, in certain cases also cone or step-shaped. Such a bowl is selected if parts tend to become jammed between spiral paths located over one another. The selection of the pot diameter depends of the size of the parts to be conveye

Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie exhaust expansion joint DN500 with a bend segment DP 0,5 bar DT 550° C ax. mov. +/-20 mm lat. mov. +/-20 mm

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie DP 1,2 bar DT 143° C ax. mov. +/-18 mm lat. mov. +/-23 mm

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie DP 2,75 bar DT 250° C ax. mov. -20 mm lat. mov. +/-8 mm

For customers who prefer an individual software solution, we offer various interfaces for the integration of HGL measuring devices. These range from low-level network APIs, Windows® DLLs, LabVIEW™ toolkits, and iDDS support to single-instrument applications (apps) for simple measurement tasks. This flexibility allows the user to choose the best solution for each specific use case. Contact us for more information.

The SAP10/3P is a high quality machine for attaching hinges with fastening prongs from the roll. The hinges are attached to your product (cases, caskets…) using this machine. Benefits / Characteristics can be used for various materials (thin walled wood types, cardboard…) precision attachment of angular spring hinges consistent high quality ease of operation meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical data Dimensions: Length 1,000 mm Width 570 mm Height 1,000 mm Weight: ca. 75 kg Noise emission: 65 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compression force: 2 x 4700 N Work space (0720-2977.20): Length (A) 40 – 360 mm Length (B) 10 –infinite Length (C) 25 – infinite Work space (0720-3034.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C) 40 – infinite Work space (0720-2981.20): Length (A) 50 – 360 mm Length (B) 16 –infinite Length (C)...

The VAP5/4-G is a high quality machine for attaching handles with fastening prongs. The handles are attached to your product (cases, caskets…) using this machine. Benefits / Characteristics can be used for various materials (all types of wood, certain tinplates and plastic) precision attachment of handles consistent high quality ease of operation works with all Schmale handle models with fastening prongs meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical data Dimensions: Length 550 mm Width 570 mm Height 1,100 mm Weight: ca. 50 kg Noise emission: 60 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compression force: 7.300 N Handles: All Schmale handles with fastening prongs Work space outside dimensions: Length (A) unlimited Width (B1) unlimited Width (B2) unlimited Depth (C) unlimited Work space inside dimensions: Length (Ai) 50 mm to unlimited Width (B1i) 30...

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

This is where you can store your small part inventory well-arranged and completely dust-free! You just need to pivot forward the case made of special transparent plastic to open in inclination. Perfect inclining function is provided even with heavy charge. The Clear-View cabinets are available in solid frames made of shock-resistant plastic (PS) of 601 mm standard width and in 6 different sizes. The Clear-View cabinets offer you a combined storage system: with order, a clear overview, dust protection, quick access and helpful transparency to identify the parts promptly. Large label areas above the handles are useful for the cases labelling and designation. The Clear-View cabinets are made of top- quality plastic and characterize through their high durability; they are nearly unbreakable and largely oil and acid-resistant. In addition, they have two utility spaces and can be employed in every workplace – i.e. without frame, too.

Protherm controllers are universal configurable programmers that monitor, control and record processes running in a single furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • Up to 32 PID control-loops to regulate parameters such as temperature, furnace pressure, atmosphere parameters (e.g.: carbon potential, nitriding potential and oxygen potential) • Real-time monitoring of jobs at all stages • Process parameters configured with alarm limits • Online diffusion calculation to control the process using required target values (e.g.: case depth, surface carbon content) • Up to 999 treatments/templates can be created and modified • Integration with SCADA systems • For all types of processes: nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • For compliance with CQI-9, AMS 2750 &..

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 9 is the powerful entry-level model of the product series. It allows the measurement of surface and interfacial tensions as well as the determination of the density of solids and liquids. Possible measurements: - surface and interfacial tension - density of solids and liquids

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

The tensiometers of the DCAT series are measuring instruments for force-based characterisation of surfaces and interfaces. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25 is the multifunctional all-round model of the series. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 300 °C. In addition it is possible to investigate the viscoelasticity of monolayers in combination with the Langmuir trough module LTMr. As the only tensiometer in the DCAT series, this model can analyse the adhesive force extensively thanks to an additional camera module. Measurements: - surface and interfacial tension - liquid density and solid density - dynamic contact angles - surface energy of solids - critical micelle concentration (CMC) - sedimentation and penetration - analysis of adhesive force - surface pressure - viscoelasticity of monolayers

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 15 is the standard model of the DCAT series and offers more measurement methods and modular extensions compared to the entry-level models. In addition to measuring surface and interfacial tension as well as density, the DCAT 15 can be used to determine dynamic contact angles, the surface energy of solids and to investigate sedimentation and penetration properties. Together with the LDU 25 liquid dosing unit, automatic concentration series can be generated to determine the critical micelle formation concentration. Measurements: - surface and interfacial tension - liquid and solid density - dynamic contact angles - surface energy of solids - determination of the critical micelle concentration (CMC)

The stationary clinching unit DFG 400/50 PH is our cheapest model with which you can enter into a stationary and reliable production. A compressed air connection with a maximum inlet pressure of 16 bar is necessary and the operating pressure is adjustable. Designed for use cases in ventilation and ducting industry, sound proofing, steel and metal working industry, sign manufacturing, roof building, plumbing, computers, electronics and lighting industry. • Favourable stationary solution • Processing of bulky or hollow components • Large horizontal and vertical throat • High-value joining result due to adjustable path restriction • Reproducible results • Suitable for use under permanent load • Low-noise Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

The Gronemeyer overhead conveyor is used for discharging or transferring products. Distribution occurs in cycle operation and across the direction of transport. Depending on the use case, it is attached to existing machines to save space, or is set up in a free-standing housing. Even large distances can be overcome with the machine. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 3000 mm —Complete machine cover made of Makrolon with maintenance doors Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts