Results for
ZEMO VERTRIEBS GMBH
Germany
Workbench mounted Torque Transducer. Crane’s stationary transducers are the quality choice for the testing of all continuous drive, impulse and hand torque tools in the workshop and production line-side environment. For best results with impulse tools we recommend the use of a Crane CheckStar rotary torque transducer with a suitable joint kit rather than a stationary transducer. Stationary transducers are used off the production line in workshop or line-side test stations. Combined with joint kits that represent the production joint condition, the stationary transducers form an effective off line test for verification of assembly tool performance. Key Features: - Static accuracy ± 0.25% FSD (bi-directional) - Plug and Play with Crane display systems (UTA) - Combine with joint kits for workshop simulation of hard to soft joints - Built-in workbench mounting flange - Rugged and durable construction, aluminium housing, stainless steel shaft - Ingress protection rating IP40.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Rotary Transducer with Angle Measurement Option CheckStar sets the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. CheckStar transducers fit in-line between the assembly tool and the fastener, measuring the actual torques applied under production conditions. Whatever the vibration and shock loads experienced, CheckStar's patented contact system ensures contact is always maintained between the readout and the strain gauges. Inferior systems suffer from "brush bounce" that leads to unreliable torque readings. The low inertia design of CheckStar ensures accurate and repeatable measurement of high speed transients, such as the point of shut-off on continuous drive tools and the pulsing of impulse tools.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The CheckStar Multi is the latest generation of Crane Electronics market leading CheckStar in line rotary torque transducer. It raises the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. If angle is specified, the CheckStar Multi rotary torque transducer will include an angle encoder giving 0.125° resolution (720 PPR). It also incorporates a light ring, giving the user visual feedback of the status of a tightening, when used with a Crane readout or data collector. The CheckStar Multi fits in line between the assembly tool and the fastener, measuring the actual torques applied and angular rotation of the fastener, under production conditions. Whatever the vibration and shock loads experienced, CheckStar Multi’s patented contact system ensures a connection is always maintained between the readout and the strain gauges. [...]
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-QC series torque transducers are designed to work with System 8 Digital Torque Tester when used with ML 1000 and ML 2000 Mechanical Loaders. These transducers use Quick Connect baseplates that are a feature of the loader system. Features and Benefits: - Hex mounting flange style. - Can be mounted to ML 250 and ML 600 mechanical loaders. - All up to 250 lbf·ft capacity can be mounted to Quad Plate for multi-transducer mounting on the ML 250. - Smaller sizes (up to 300 lbf·in capacity) can be mounted to STMB or UMB brackets for use with a bench or table. - Larger sizes can be mounted on UMB L-bracket. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - Mechanical Loader ML - DTT System 8
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-L Series Torque Transducers are designed to work with both System 4 / System 5 and System 8 Digital Torque Testers. These transducers incorporate an integral “L” bracket to facilitate horizontal or vertical mounting, such as for a bench or mobile (cart) application. Features and Benefits: - L-bracket has two (2) holes, 5/16” diameter, 3.25” on center on each leg of bracket. - Designed to be mounted to a bench or cart - very quickly. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - DTT System 8
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The gateway to the finest in torque measurement tools! TT-Series Torque Transducers are designed to work with Sturtevant Richmont Digital Torque Testers or the like. Features: - Integrated SR mounting flange - Can be mounted to ML 250 Mechanical Loader. - Can be Mounted to Quad Plate for multiple mounting on ML 250. - Smaller sizes (up to 400 in.oz.) can be mounted to SSMB, STMB, or UMB brackets. - Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket. Related Products: - Mechanical Loader ML - DTT System 8 Optional Components: - 10293 = Detachable Signal Cable ca. 1,20 m * - 10153 = Single Mounting L-Bracket UMB (500 ft.lb and above) - 10154 = Triple Mounting L-Bracket STMB (up tp 400 in.oz) - 10601 = Switchbox 4-Way - 870776 = Square Adapter 1/4"f x 3/8"m - 870777 = Square Adapter 3/8"f x 1/2"m - 870778 = Square Adapter 1/2"f x 3/4"m - 870779 = Square Adapter 3/4"f x 1/1"m
Request for a quoteETH MESSTECHNIK GMBH
Germany
Particularly suitable for small screwing tools 4 torque range from ± 0 - 0,5 Nm to ± 0 - 5 Nm digital output Square drive or hexagon drive No service needed because of contactless data acquisition High accuracy due to frequency modulation and strain gage technology reduced power consumption High noise immunity due to digital signal very compact design Automotive industry Test benches Assembly applications Pulsed tools
Request for a quoteETH MESSTECHNIK GMBH
Germany
Series DRDL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V per torque range. Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% overload protection 16 measurement range from ± 0 - 0,5 Nm up to ± 0 - 5000 Nm 2 torque ranges (1/10 - 1/2 of the 1st measuring range) Integral signal amplifier Low moment of inertia Single supply voltage Wide range of applications Multipurpose use Contactless output signals Compact Speed measurement (option) Angular measurement (option)
Request for a quoteTEST GMBH
Germany
TesT electrical torque transducers are available as static reaction sensors and with rotary axle for dynamic applications. The requirements of our customers to precise, durable devices for industrial applications are fulfilled. They are easy to handle, from high quality and long life span. Other dimensions, measuring ranges and executions are available on request. TesT delivers all electric force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data, and automatically calibrate them. Thus, these electronic units operate with dozens of different sensors, so that a complex recalibration is not required.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The TCI Multi allows the user to connect up to five Wrenches to be used in assembly production, allowing for complete control of your torque tools and peace of mind for safe recording and logging of vital data. The WrenchStar Multi can be connected to the TCI Multi at the push of a button. The TCI Multi allows easy management, set up and diagnostics of itself via Web Browsers. The TCI Multi can be used stand alone and jobs can be selected and results sent to a PC or Web Page. The TCI Multi accepts Open Protocol commands via Ethernet to select a Job to use with the WrenchStar Multi. The TCI Multi has Web Status Page that allows Ethernet properties, RF properties, logging of messages, and Wrench status to be monitored. Web Page mirrors last Torque and Angle reading from Wrench plus its Torque status (LO, OK and HI). LED lights show real time status of the Wrench connection on the unit. Connection to Crane rotary torque transducers is also possible using the RFm wireless device.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Hybrid Technology – Smart Assembly Solutions The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Electric Impulse Tool with Torque Control and Angle Monitoring. The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. The angle sensor is an extremely compact (PAT) rotary encoder that detects both angle as well as direction by 1 degree, signal transmission contactless. Due to the newly developed outer rotor servo motor and the composite body, the Yokota system e-wrench has the lightest weight in its class. For cooling of the motor it is equipped with a fan that reduces motor size (and weight at the same time). For cooling of the impulse unit it is equipped with a separate fan. [...
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
Torsionally rigid HighSpeed-couplings for test benches FlexDur FD-HS •Torsionally rigid and backlash-free torque transmission •Directly adaptable to HBM torque transducers •Suited for very high rotational speeds •Compensates for axial, radial and angular misalignments •Low reaction forces in case of shaft misalignment •Low mass moments of inertia through high power density •For use at ambient temperatures from 35 °C up to +110 °C •No maintenance or lubrication required •Almost unlimited lifetime and wear-free with proper shaft alignment
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Yokota system e-wrenches have a built-in torque transducer and angle-encoder on the main shaft and is wireless connected to a controller. The Yokota battery system e-wrench is the perfect solution for applications where cables or hoses are disruptive, but you still need to have all data checked, controlled and documented. Wireless communication with the control unit WU-1 for up to 10 meters. Each controller can be paired with up to 4 independently operating battery system e-wrenches. For data-collection, the controller is equipped with a RJ-45 connector for LAN Ethernet TCP/IP. Optional Display DC-2 shows tightening result (OK / NG and torque level reached) and either the free running angle, the tightening angle or the number of bolts and number of impulses. Connection to the WU-1 controller by means of cable with 5 meter length (included in delivery). [...]
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Torque Readout with built-in Transducer. The basic, easy-to-use readouts include a built-in torque transducer and has a variety of measurement modes including track, peak, pulse and click. The ReadStar TT can be used as a portable device or fixed permanently using the mounting bars. The new and improved torque tester incorporates a bigger and clearer OLED screen display to view readings and results and the redesigned, easy to use keypad offers a familiar feel with simple function keys to effortlessly switch between modes and settings. The new internal memory now allows for a massive 999 readings to be stored and the addition of a new micro USB port allows for a wider range of connections for printing and exporting data. The new port also allows for additional power options. The ReadStar TT is supplied with a built-in transducer and a standard rundown adapter, and is available in 0.5Nm, 1Nm, 4Nm, 12Nm and 30Nm ranges. A premium joint kit is also available, sold seperately.
Request for a quoteETH MESSTECHNIK GMBH
Germany
Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.
Request for a quoteETH MESSTECHNIK GMBH
Germany
3 measurement range from ± 0 - 0,5 Nm to± 0 - 50 Nm DRDML | DRDMS | DRDMN for mechanical connection to Maxon gearboxes with contactless data acquisition as a complete drive and torque measuring unit Test bench construction Screwing technology
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ETH MESSTECHNIK GMBH
Germany
Customized Solution Hand-held device with integrated torque transducer. Direct channel selection of filed test programs. Drive of the transmission is achieved to the predetermined moment of friction during the assembly. Subsequent break-in period and subsequent Reibwertprüfung with threshold monitoring, visual evaluation and documentation. Direct channel selection of filed test programs Safety circuit by two-hand operation Constant load independent test speed either vertically or horizontally about Balancer
Request for a quoteETH MESSTECHNIK GMBH
Germany
Series DRVL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 10 - 28,8 V DC and outputs an electrically isolated analog signals of 0 ± 10 V and 10 kHz ± 5 kHz. The standard version has smooth shaft ends, several types are available with optional keyways
Request for a quoteTEST GMBH
Germany
TesT Force transducers comply with the best technologies available. They incorporate our long experience as well as our customer's preferences and requirements for precise and robust devices for various applications. TesT Force transducers are particularly characterized by precision, quality, robustness, durability and convenient handling. On demand we also provide specially-designed force transducers with other dimensions and measuring ranges. TesT delivers all electrical force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data and automatically calibrate with them. Thus, these electronic units operate with dozens of different sensors so that a complex recalibration is not required.
Request for a quoteTEST GMBH
Germany
The mobile evaluation electronics TesT 813 meet all demands that precise measurement processes require. They have been designed for use with TesT force and torque transducers, but they are also suitable for other resistance-based transducers. The devices consist of a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger allows f.e., saving peak values and/or curves in xls files. Basic settings, that had been stored once, even remain when the device has been switched off. Because of the high measurement frequency of up to 2 kHz the model can be used for static and dynamic measurements. Sensors that are equipped with TEDS (Transducer Electronic Data Sheet according to IEEE 1451.4) chips can be recognized and automatically calibrate. Thus, the units may operate with different sensors, so that a complex recalibration is not required.
Request for a quoteResults for
Torque transducer - Import exportNumber of results
22 ProductsCountries
Company type