Results for
KLÖPPER-THERM GMBH & CO. KG
Germany
Temperature controllers and temperature sensors from Klöpper Therm are used in all electric heating systems in which the temperatures of the heated areas must be reliably measured and controlled with precision.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration. The robust round metal enclosure accommodates a resilient preloading disk, a bimetal disk and a silver contact. The compact switch system is covered by means of a plate which also carries a silver contact and is isolated from the enclosure by means of an isolating washer. The resilient preloading disk ensures excellent performance. The resilient preloading disk keeps the contact pressure constant throughout the entire temperature range of the BEDIA switch until switching occurs. The mechanically and electrically unloaded bimetal disk snaps over at a preset temperature, with either opening or closing the contact arrangement. The bimetal will only snap back to its initial condition after the temperature has dropped significantly.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® space heaters are robust heaters for industrial environments and can be used even in harsh environments. Depending on customer’s requirements, the heaters can be manufactured with different surfaces (painted steel, galvanized/painted steel, stainless steel) and equipped with temperature controllers, temperature limiters and protective grids.factory floors crane cabs work containers workshops storage rooms Instantaneous heating on construction sites garages garden houses fire brigade equipment houses
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
Whenever the process requires high temperatures and the advantages of water as heat carrier (best heat conductivity properties, inexpensive, low viscosity) are to be used, this construction series is the best solution. Absolute reliability, high regulating accuracy, easy operation and a favorable price /performance ratio: apart from the versatile performance features a modern temperature controller has to fulfill, these are the key criteria for the temperature controllers teco wh/whx. As one-circuit and multi-circuit units, our modular temperature controllers in the teco whx series cover a wide performance spectrum. Heating capacities of 12 to 600 kW, max. possible cooling capacities up to 1460 kW* and pump flow rates of max. 200 m3/h are impressive basic data of these technically sophisticated temperature controllers for operation with compressed water up to 220 °C.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMPTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. In the selection series we used the most frequently selected equipment features and heating performance of the proven premium series advanced. The protemp selection temperature control unit is particularly suitable for the supply of multi-circuit water distributors and is designed for the display of up to 6 external proflow temperature control channels.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The patented gwk solution includes cold water temperature controllers that can be operated without glycol in the temperature range between 0 °C and 25 °C. The user can select between two models that are differing in cooling capacity and flow rate. A precise microprocessor control with simultaneous indication of nominal and actual value, the simple one-touch operation, optional interfaces at the front panel and external sensor connection, splash-water proofed electrics and the cabling with CEE-socket ready for connection make the unit ready for immediate use. Leak stop operation, mould draining, acoustic alarm, automatic filling and top up, additional manual filling possibility for conditioned water, strainer in the cooling water connection and parts out of corrosion resistant materials that are in contact with the medium are part of the comprehensive standard equipment.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The higher process temperatures, the higher the technical requirements for the temperature machine. Decades of experience in construction of temperature machines for heat carrier oil applications up to 400°C makes us the preferred partner of many customers for applications of this kind, particularly in the area of pressing and extrusion. Dimensioning of our teco tt/th series up to 400°C is based on DIN 4754. Design and technical configuration of all temperature controllers are based on the requirements of this norm. Exact film temperature calculation ensures, in combination with flow monitoring, efficient and at the same time reliable operation in all operating conditions. A lockable filter in the circulating medium return line is a standard installation; another installed feature is an expansion vessel with a cold oil container for reliable prevention of damage by oxidation due to oxygen accumulation in the heat carrier.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. By using an optional frequency inverter, the already high basic effi ciency can be more optimized and the pump characteristic curve can be optimally adapted to the respective operating conditions. PROTEMP SERIES 1-4 ADVANCED Water temperature control unit up to 95°C -140 °C Cooling capacity: 105 - 717 kW Heating capacity 9 - 50 kW Digitization concept „protemp connect 4.0“ Dual frequency version (50/ 60 Hz), motor IE3 class Energy consumption display Pump speed control OPC UA interface
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
Absolute reliability, high regulating accuracy, easy operation and a favorable price/performance ratio: apart from the versatile performance features a modern temperature controller has to fulfill, these are the key criteria in the teco wi temperature controller series teco wi. As one-circuit and multi-circuit units, our modular temperature controllers in the teco wi series cover a wide performance spectrum. Heating capacities of 12 to 1000 kW, max. possible cooling capacities up to 3460 kW* and pump flow rates of max. 300 m3/h are impressive basic data for these technically sophisticated temperature controllers for operation with compressed water up to 150°C. This series is mainly used for roller temperature control (foils, paper, rubber etc.).
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. All standard units are equipped with an energy efficient constant heating control. Depending on the product version a flow rate measurement and control, whose actual value is indicated simultaneously with the actual and nominal values on the colour screen, is installed as standard or is optionally available. Temperature profiles are graphically indicated after selection of the corresponding menu function. On the start page useful functions like limit value monitoring, leak stop operation etc. can be selected. The proven teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. The 95°C series was extended by three versions with higher capacities. The models are designed for larger consumers; they have heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW and pump flow rates from 110 to 170 l/min.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The use of direct cooling is always an advantage when a high cooling capacity is requires and the temperature differences between cooling water and circulating water are low. Here cooling water is directly and without temperature loss supplied to the circulation circuit. Absolute reliability, high regulating accuracy, easy operation and a favorable price/performance ratio: apart from the versatile performance features a modern temperature machine has to fulfill, these are the key criteria in the temperature controller wd series.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
Temperature controllers of the teco series cd are designed for the operation with water and direct cooling up to 95 °C or 120 °C. The temperature of the process water is controlled automatically. A temperature sensor, installed inside the unit, measures available actual temperature. The microprocessor control with membrane keyboard or touchscreen operation compares measured value and preselect set value and controls heating or cooling. A trouble free operation is guaranteed by a complete safety system.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
HIGH PERFORMANCE TEMPERATURE CONTROL DEVICE WITH HIGH COOLING CAPACITY, HIGH FLOW RATE AND REDUCED ENERGY CONSUMPTION. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. In the selection series we used the most frequently selected equipment features and heating performance of the proven premium series advanced. The protemp selection temperature control unit is particularly suitable for the supply of multi-circuit water distributors and is designed for the display of up to 6 external proflow temperature control channels.
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The Protherm 10 is a cost-effective temperature and industrial controller with expanded functionality, including a programmer and an optional datalogger.
Request for a quoteLIQUOSYSTEMS GMBH
Germany
Our Nano Solo is supplied complete with temperature sensor, motorized ball valve and GEKA-Plus couplings. Simply connect the Nano Solo to the power supply and the existing cooling water supply. Mobile individual fermentation control Motor ball valve or solenoid valve 1/2 inch Temperature sensor 5 meters with weight Connection cable with plug-in transformer 5 meters Stainless steel retaining plate for flexible assembly Protection class IP 65
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
The integrat 80 is used for the modular temperature control with water up to 140°C in the basic version with up to six temperature control circuits to be operated completely independently of each other. The basic version can be expanded with extension columns and up to 24 temperature control modules. As an option, the temperature control circuits can be extended with the 4-way distributor vtc with flow and temperature measurement. Thus, a maximum of 96 temperature control circuits can be monitored with the vtc 4-way distribution system. In conjunction with the standard heating control system used as standard, a homogeneous temperature profile on the mould cavity surface is achieved in an extremely energy-efficient manner, as well as with constant cooling by using a motor valve. As an option, the pumps can also be operated with frequency control unit. This improves the procedural results and contributes to energy savings.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
Dynamic mould temperature control is a temperature control method that allows temperature variations within the cycle and is also known as “variotherm temperature control”. While this method has been known for almost forty years, it has only undergone a dynamic development in the last few years. This is due to the increasingly exacting quality requirements of consumers (e.g. prevention of visible joint-lines, gloss variations and other surface defects) and the use of plastic materials in new applications. When a temperature control system is selected it is important to mind that it matches exactly with the application and that the economic benefit justifies the technical efforts as well as the energy consumption.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BORNEMANN GMBH
Germany
Branding irons for hot stamping in wood, leather, rubber or synthetics for inclusion in an electric branding iron device. The iron can be supplied with a controller for stepless temperature control. This ensures a temperature-precise control of the heat development created. Overheating is thereby avoided and the labelling obtains an attractive design.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
The waterproof HACCP-Thermometer with Pt1000-Penetration Temperature probe is the appropriate instrument for measuring temperature or process controls for the food industry, laboratories and production processes.
Request for a quoteELMESS-THERMOSYSTEMTECHNIK GMBH & CO. KG
Germany
Control panels for safety monitoring and temperature regulation, for process heaters - Thyristor control panel - Interface to PLC - SIL calculation - Ex control panels for installation in hazardous areas
Request for a quotePRESSTECK S.P.A.
Germany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quoteANTHERMO GMBH
Germany
Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.
Request for a quoteANTHERMO GMBH
Germany
Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of...
Request for a quoteResults for
Temperature controller - Import exportNumber of results
113 ProductsCountries
Category