Tap valves - Import export

Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB

The GEMÜ 650TL diaphragm valve is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is via a stainless steel handwheel. The valve can only be operated (opened / closed), if a control medium is applied to the actuator. When the control medium supply is switched off, the valve closes and can no longer be operated manually. — Hermetic separation between medium and operator — Ergonomic handwheel — Additional pneumatic actuator for closing from a central control system — CIP/SIP capable — Optional flow direction and installation position

• Orifice (DN): 0.6 mm • Pressure range: 0.5 – 10 bar • Operating voltage: 6 VDC • Power consumption: max. 1.4 W • Degree of protection: IP65 Staiger pilot valves are used in order to operate non-contact water taps in energy-saving mode. These valves fitted with microbatteries operate only after being actuated by an electrical impulse. This impulse is triggered by moving your hand in front of the sensor, which triggers the extremely robust pilot valve. After water has been dispensed, the valve returns to its inoperative position. This valve is characterized by robustness, durability and small size. Benefit The low power consumption by the impulse control is ideally suited for use in electronically controlled taps with battery operation. The valve is constructed entirely of water-approved materials and is certified according to KTW, W270, WRAS, ACS and NSF 61.

Valve tapping bridge with service shut-off and for tapping 1 "- 2". Combination rubber insert chambered with several micro-sealing lips. Seal material according to KTW / W 270. Seal the bore with the auxiliary shut-off via the side outlet and seal it after tapping until the valve bonnet is reassembled. For each dimension, a top with matching clamp. scope of application • for plastic pipe (PE or PVC) DN 50 - 200 • for sluice-free, upper tapping under pressure by means of Rehbein auxiliary valve • for water up to PN 16

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for tapping 1½“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN 16 until DN 150, for water PN 10 until DN 200

Flat slide with operating shut-off for water up to PN 16 (optional for gas up to PN 5) and for top tapping 1 "- 1½" under operating pressure. Thread outlet 1 "- 1½" parallel to the supply line. Connection piece with extremely low height. Outlet by means of elbow union. Front and main shut-off with externally driven, chrome-plated switching ball. Nominal diameter range DN 80 - 500 with only one connection piece with patented Vario seal. Seal material is from DVGW to KTW / W 270. Scope of application • for cast iron, steel and AZ pipes DN 80 - 500 • For sluice-free tapping under pressure without auxiliary valve • for water up to PN 16 • optional for gas up to PN 5

Telescopic installation set for civil engineering / road construction / pipeline construction. Infinitely adjustable, with square key bar, dome sleeve, pull-out guard, cap, protective tube and stepped bell with dirt-tight fit. Poles and castings completely galvanized.

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865