Support rings - Import export

Here, an overview of some practical benefits of the TEH 30 T: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 30 T electric heater - Some technical details: Heat output in kW: 3,3 Heat output in kcal: 2837 Amount of air: 300 m³/h Temperature increase ΔT: 54 °C Power consumption: 13,4 A Power socket: 16 A / Schuko Supply voltage: 230 V / 50 Hz Thermostat: yes Mobility: Portable Sound level: 63 dB (A) Length x width x height: 325 x 260 x 332 mm Weight: 10,6 kg Hose connection: 155 mm

Here, an overview of some practical benefits of the TEH 100: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 100 electric heater - Some technical details: Heat output in kW: 9 - 13.5 - 18 Heat output in kcal: max. 15.400 Amount of air: 1.785 m³/h Temperature increase ΔT: 38 °C Power consumption: 27,2 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 69 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg Hose connection: 300 mm

Lipp developed a system for the non pressurised (up to max. 5 mbar) storage of dry gas which has been used for over 300 projects worldwide over the past 30 years or more. Sizes from 30 to 5000 m³ are available according to the gas yield in each case. The gas accumulator consists of two parts a bubble shaped storage balloon a steel container to protect the balloon against mechanical damage and the effects of weathering The container is produced using the tried and tested LIPP Double Seam System. The storage balloon is made of polyester fabric specially laminated with PVC on both sides for improved gas resistance and UV protection. It is suspended in the container by means of a support ring. The gas pressure is increased as required between the gas accumulator and the point of utilisation by means of compressors. This results in lower investment and maintenance costs on the one hand and an extremely reliable and virtually wear free system on the other. Consequently

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

For frequency values of 20, 30, and 35 kHz ultrasonic boosters with different gain ratios (transformation) are available. All ultrasonic boosters are made of high-quality titanium. Depending on the required demands, they are installed using rigid or flexible support rings.

POLYPAC® - Veepac is a set of fabric reinforced Chevron rings comprising of a support ring , sealing rings and a pressure energising ring . In the packing set the energising axial force is transferred between the individual packing rings so that each ring is pressed into positive contact with the rod surface. Additional to the standard material special material grades are available for a large variety of working conditions.

Our experience in filling cylinders has enabled us to develop our own pump technology which has proved its worth in a number of fields in addition to filling cylinders. Pump aggregate NP 10/15 Performance Min./Max.: 150-300 kg/h 0.6-1.2 gal/min Power cons.: 1,5 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 600x400x500mm Weight: 40 kg Pump aggregate NP 25/50 Performance Min./Max.: 400-1000 kg/h Power cons.: 3,0 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 800x600x500mm Weight: 85 kg Pump aggregate NP 25/70 Performance Min./Max.: 600-1500 kg/h Power cons.: 4,0 KW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH):800x600x500mm Weight: 85 kg The following stats are valid for all pumps: Materials Valve casing: Special brass / cast bronze Valves: High grade stainless steel Plunger: Ceramic Sleeves: CO 2/N 2O – resistant compound; fabric reinforced Support rings: Teflon with graphite, run-dry-proof Crankshaft: Drop-forged and case hardened Pump

Check valves are used to prevent media from flowing back in systems or to protect equipment against media blow-back. The three types (with spring, without spring and COMPACT) allow for use in many different applications. The valve seat is supported by an O-ring and guarantees maximum safety and reliability.

THE EFFICIENT SOLUTION FOR SMALL PRODUCTION SERIESAre you looking for a solution that is a more economical choice than a larger Trowal system? Then look no further than our E5 mini barrel. It is perfect for deburring and abrasion, above all on small workpieces from the optical and fine mechanics industries. The double-conically shaped rotating barrel body generates an intense rotation to achieve the perfect abrasion result. SOPHISTICATED TECHNOLOGY The mini barrel stands on a steel sheet construction with four pedestals. The barrel bodies are secured to a drive roller and support roller with locking rings. The barrel body is made from polyurethane and the quick-action cap is waterproof. SPECIAL EQUIPMENT It is also possible to attach two additional barrel bodies if necessary. These are driven via a roller system that is fully variable thanks to a three-phase motor. The cover can also be ordered with safety switches.

Support rings for type A carrying rollers Type A support rings prevent sap build up and the build up of dirt on the carrying rollers and ensure a straight run in the bottom strand. Support rings (rubber rings) from FTK Förderband Technik Kilian GmbH are attached permanently to the roller and are characterized by their abrasion resistance. In addition to the proven standard, we also manufacture special quality rings such as white food quality rings, oil and grease resistant rings, and rings for extreme temperature ranges ( 40° C to 180° C). Support rings for type B carrying rollers Rollers fitted with type B support rings are used as bottom belt rollers. They are generally placed on the ends of the carrying rollers. Support rings (rubber rings) from FTK Förderband Technik Kilian GmbH are attached permanently to the roller and are characterized by their abrasion resistance.

Spiral rings are mounted on standard rollers and used to clean conveyor belts. When the idler roller rotates, the spiral rings move the dirt from the center of the belt outwards through a tumbling motion. The spiral rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Support disks on idlers bridge larger distances to the conveyor belt. They support the belt and are preferably used in sidewall belts or profiled conveyor belts. The support disks (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently fixed on the conveyor roller and are characterized by their abrasion resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Buffer rings absorb the falling energy of the conveyed goods and thus protect the belt from damage. The buffer rings (rubber rings) from FTK Förderband Technik Kilian GmbH are permanently attached to the conveyor roller and are characterized by their wear resistant quality. In addition to the tried and tested standard, we also manufacture rings in special quality, e.g. B. white food quality, oil and fat resistant or for the extreme temperature range ( 40 ° C to 180 ° C).

Support buffer rings

Precise even with low strip tension The segment rolls were developed specially for use in stretch bending levellers. The extremely free-running measuring rings permit high-precision shape measurement even with very low strip tensions. A rigid tubular section which forms the shaft of the roll supports several pivotably mounted measuring rings. They form the outer shell of the measuring roll over which the strip passes. Force sensors inside the measuring rings detect the force resulting from the strip tension. The sensors have high resolution, are overload-proof and maintenance-free. The data are transmitted through the centre axis of the roll and output as a Profibus signal.

Idler with precision roller tube and precision groove ball bearing, multiple labyrinth, dust cover, rain cover and grease chamber Support rings and buffer rings Side guiding rollers Holding brackets for lower belt rollers

1970s inspired fixed-line push-button telephone with classic metal bell ringer The PushMeFon is a telephone in the classic shape if the 1970s. With its retro styling and modern colours it will easily attract the attention of friends and family, and because of the latest technology inside you can simply plug it in and use it. Have fun talking! Technical Specifications corded push-button phone modern colours version with classic metal bell (Sound sample) ring indicator light supports tone dialling Package includes Opis PushMeFon landline telephone telephone cable with interntional RJ11 plug telephone cable adapters for Germany, France, UK Dimensions length: 23 cm width: 22 cm height: 13 cm weight: 0.9 kg

Using the materials mentioned, HEUTE+COMP. manufactures sealing elements and O-ring supports according to your specifications. PTFE support rings prevent high pressures from extruding O-rings into sealing gaps and damaging the rings as a result. Due to its cold flow characteristics and high degree of abrasion, pure PTFE is only conditionally suitable for sealing. Accordingly, a wide range of PTFE compounds have been developed to account for all involved parameters. Temperature Media influence Pressures Sealing gaps Assembly conditions Additionally for dynamic applications: Material and surface of the sliding counterpart Speed The technique used to process a material also influences its properties. For instance, a material filled with glass can be made gas-tight through special heat treatment. For this reason, our team offers consultancy early on during the development phase in order to select appropriate materials for your application.