Wear plates - Import export

Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts

NMS Precision Sine Tables with built PMNM chipboard impress with very good workmanship and precision. The sine table base is hardened to 60 HRC, burnished and precision ground. The angle is adjusted according the sine principle by using gauge blocks. Our NMS sine tables are used in the EDM, grinding and measuring in the highest precision. Technical Details: — Precision Sine Table with built fine pole chipboard — Holding power 100N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 5mm — plane parallelism 0,005/100mm — Angular accuracy +-0.0013°/+-5sec.

Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding

Permanent Magnetic Circular Chuck Type RM, with reinforced ceramic magnet system can be used for clamping bulky and heavy workpieces. The magnetic force is infinitely variable, in the surface incorporated centering grooves facilitate alignment of the workpiece. In the rake face, a center hole can be introduced. Structure: — Ceramic magnet system, Aluminum body, — Max Pole pitch 5+8mm — Holding power 140N/cm² — Magnetic field height 8mm — Pole plate wearing limit 8mm — Switch travel MAG-ENT-MAG 500° Recommendation: Super Strong circular chuck for turning, also for rough parts

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

"Hard chrome is a chrome coating, which, depending on requirement, is applied in a thickness of 10 to 500 µm on the raw part. Hard chrome is characterised by a high degree of hardness, high temperature resistance and high abrasion resistance. This coating is therefore a popular application in the automotive field. Coatings which are hard chrome plated have excellent wear protection and high homogeneity. This process is suitable for rack goods. Possible post-treatments Abrading Polishing"

The KKE edge and contour deburring machines are designed for chamfering small to medium-sized workpieces. The durable steel casing, the wear-resistant and sanded work plate and the speed regulation convince in every regard. The machine is available in KKE1 and KKE2 designs. The KKE2 includes a prismatic guide with extraction socket in the scope of delivery. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. A chamfer width of up to 3mm is possible in NE metals and steels and up to 2mm in stainless steel. Radii processing is feasible up to R3. We recommend an industrial vacuum with automatic switch-on for the KKE2 so that cleanliness at the workplace can be guaranteed.

The small and compact chamfering machine is designed for chamfering small to medium-sized workpieces. The light aluminum casing, the wear-resistant and sanded work plate, the optional speed regulation and extraction sockets convince in every regard. The Speedy Contour is available in the type 270 and 320 designs, this refers to the able plate size. Both versions are available with and without speed regulation. For high-alloy materials, the speed range can be adjusted for speed-regulated machines from 10,000 to 30,000 rpm, through a technical change, to 2,800 to 7,400 rpm, and for machines without speed regulation from 20,000 rpm to 5,100 rpm. Thanks to the brushless motor the machine is perfect for continuous operation. Our versatile tool range includes different VHM milling cutters and CBN or diamond grinding pencils. The VHM milling cutters are available for the processing of chamfer angles and radii.