Water treatment plant - Import export

wivel jib crane 4551.015Swivel jib crane, galvanized, admissible load max. 175 kg, regulating capacity 275- 775 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and precise discharge jet. Graduation according to Category B (Tolerances according to DIN EN ISO 385).

SYSTEM SOLUTIONS FOR MUNICIPAL WASTE WATER TREATMENT Lipp has for many decades been an established partner of municipal waste water treatment plants, engineers and general contractors in the field of tank and system solutions for municipal waste water treatment. Due to their method of construction as well as flexibility in the choice of materials and ideal diameter – height ratios, Lipp tank and system solutions are especially suitable for the needs of small to large sewage treatment plants. They are ideally tailored to one another, but may also be embedded as individual island solutions into existing systems and are therefore equally popular with planners and end users alike. The stainless steels used and the double seaming guarantee maximum water tightness and durability with low maintenance for a wide variety of waste waters, slurries, process liquids and gases. The versatility in terms of the system solutions offered for municipal waste water treatment plants

TANK AND SYSTEM SOLUTIONS FOR WASTE WATER TREATMENT PLANTS Individual, customised container and system solutions have been one of the core business areas of Lipp GmbH for decades. This is demonstrated by the long list of references for completed tanks and equipment that have been implemented in close cooperation with well known engineering firms and companies for industrial waste water treatment plants at home and abroad. From simple, open topped waste water tanks through process vessels with special requirements for stainless steel and sealing materials to fully equipped fermenter types, (SBR, CSTR etc.) for different applications, Lipp offers a wide range of system solutions. Each project is planned and manufactured individually according to specific customer requirements for material, diameter, process instructions etc., and installed and tested if necessary in close cooperation with the partners. The versatility of the Lipp system in combination with process

SYSTEM SOLUTIONS FOR GAS STORAGE With the Lipp gas holder Lipp offers a tried and tested system solution which is complete in itself, for unpressurised storage of biogas, sewage gas and landfill gas. This solution is chiefly used for municipal waste water treatment plants and landfills. Due to its design, as well as high functional and operational safety, it also ensures low maintenance costs over a very long service life. This is mainly because the sensitive gas holder is protected against UV radiation and other environmental influences by a steel container manufactured with the Lipp dual seam system. Furthermore, this construction method allows an exact leak test and highly accurate metrological monitoring of the gas fill level. Both aspects are essential for safe and efficient plant operation. With certification according to § 19 WHG for Lipp GmbH and DVGW approval of the gas storage tank, further conditions are met for use in municipal waste water treatment plants.

Lipp tank and system solutions for municipal waste water treatment have been realised in close cooperation with well known design companies and end customers since the 1980s. In addition to municipal waste water treatment plants in Germany, Austria, Switzerland, France and other European countries, the Lipp system has already been successfully installed in many Asiatic projects. Lipp waste water tanks are offered in variable sizes and with individually adapted features (material, covers, additional equipment). Our success lies in professional management and close cooperation with all stakeholders over the entire project period. Reliable tank solutions, timely installation and numerous reference plants both in Germany and worldwide make Lipp an important partner in municipal waste water treatment.

ATMOSPHERIC PRESSURE, MAINTENANCE FREE AND PROTECTED AGAINST EXTERNAL EFFECTS The pressureless gas storage system of Lipp is used for the storage of gas produced on landfill sites, waste water treatment plants and also as external storage on biogas plants. The system is determined by its robust and technical advanced construction where the gas balloon is protected by a galvanized steel tank. This protects the balloon against UV light and also other external factors. The system is mostly utilized at landfill sites or WWTP to buffer the gas before its further processing. The experience gained during the past decades has improved the complete system and the single components and makes it a perfect choice for end users and general contractors.

Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in parts as well as steel construction, and can be easily integrated into an existing system. The main area of application of the Lipp gas holder is municipal waste water treatment plants and landfills which want to balance out fluctuations in gas production and at the same time need a buffer store for possible downtimes. A further gas holder may also be of interest for direct marketing of biogas, where feed in at certain times is necessary. The Lipp gas holder is especially attractive when considering the fact that electricity cannot be stored. But (bio) gas, which is used for power generation

WASTE TO ENERGY INDUSTRY BIOGAS FROM ANAEROBIC WASTE WATER TREATMENT AND WASTE FERMENTATION PLANTS. Due to their technical characteristics and profitability, Lipp tank and system solutions are used in a variety of industrial biogas plants. Two areas of application can be distinguished, which in many cases also follow both objectives. APPROPRIATE PROCESS TECHNOLOGY, SUITABLE CONTAINER TECHNOLOGY AND THE RIGHT DIMENSIONSFirst, the anaerobic treatment of various industrial waste waters, such as in food production, biofuels or similar. The main objective here is the anaerobic pretreatment of highly contaminated but easily degradable waste water to reduce the COD load before it can go to the next stage of aerobic waste water treatment. The challenge is that in spite of the low DM content, a high degree of degradation is achieved by biomass retention or return and at the same time, biogas is produced. Due to the flexibility and variability of the Lipp system in terms of procedures

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. Advantages of clamp connection: - Less connecting pieces - Fast segment connection - Clamps can be “stored” at the segment - Stepless segment positioning with height offset

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - Infinitely adjustable for diameters from 2 - 5 meters, and 5 meters to infinite - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces - Compatible with all PASCHAL systems

Circular Formwork with adjustable radii for waste water treatment plants, reservoir construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - For fair-faced concrete - perfect concrete finish (no bolt impressions) - Infinitely adjustable for diameters from 5 meters to infinity - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Integrated crane lifting clamps - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces

Recovery of flexoprint dye Picture: printing dye (red); ultrafiltrate (orange); nanofiltration permeate (clear) Application: Conditioning and concentration of cardboard printing dyes (flexo print), e.g. paper bag manufacturing, corrugated board manufacturing. Conditioning of the rinse waters by ultrafiltration(UF): Recovery and recycling of dyes, separated by tonality Further conditioning of the permeate by nanofiltration(NF): Recovery of the rinse water Further conditioning of the UF-concentrate by evaporation / distillation as pre-stage for external disposal Advantages of the process: Recovery of dyes separated by tonality is possible and established Recirculation of the rinse water is possible and established Reduction of the waste water amount At existing waste water treatment plants (based on precipitation) amounts of sludge can be reduced enormously Compact and modular design Fully automized process - low personnel costs High degradation rate and efficiency (concerning CSB, Cu,

Water treatment plants are a longlasting investment. Before planning, there are a large number of factors that need to be considered to create the perfect operational concept. We are happy to employ our full expertise to achieve the best result. This doesn't always mean building new and larger plant.. It is always a good idea to review exisitng systems.

The circular trough vibratory finishing machines are ideal for small and large series for different workpieces. A noise protection cover reduces the noise and makes it possible to work in a workshop. The right and left-hand circulation as well as speed regulation from 1,200 to 1,500 rpm provide for various processing possibilities. The abrasive material and workpieces are rotated through the generated vibration. The desired processing process is created through the contact of grinding bodies on workpieces. The programmable timer rounds off the autonomous work process. We recommend a paper filter or a fully-automatic water treatment plant for simple and comfortable water treatment. The integrated separating equipment simplifies the separation of grinding bodies and workpieces.

The new Enviro 1000 is an automatic water treatment system that purifies the process water and compound produced after vibratory finishing and reconditions it for renewed vibratory finishing operations. The centrifuge cleans and recycles the process water by separating the solid particles and often also oils from the process water and depositing them as solid sludge on the edge of the centrifuge basket used for this purpose. This cycle of processes: Vibratory finishing, cleaning and recycling the process water and finally reusing the process water in a renewed vibratory finishing process saves costs and is extremely environmentally friendly.

"The main customers of our MDLab are universities, institutes and companies who conduct research and practical studies on membrane distillation. This highly precise laboratory set up is fully automatic and suitable for the investigation of all aspects of the membrane distillation process as well as material research e.g. on membranes. The MDLab is equipped with a flexible test cell, which can encompass any MD channel configuration or material sample. Our MDLab system can be visited in Freiburg on appointment for a full demonstration. Technical information: 120 cm x 140 cm x 85 cm Fully automated Tablet controlled (Terra tablet included) Customizable according to specific rquirements All MD channel configurations possible Suitable for continuous operation Power supply required"

"Clean water with clean electricity Billions of people still have no access to clean drinking water or lack adequate sanitation. Residents of rural areas are particularly affected. If drinkable water is needed far away from any infrastructure, SolarPurification can help. The system can produce up to 200,000 litres of clean drinking water per day even from heavily polluted surface and ground water. Clean drinking water without chemicals Several treatment stages make it possible that the drinking water is not only clean but also safe. The SolarPurification filters 99.999 % of all bacteria and viruses from the existing water - and this completely without the use of chemicals. This is made possible by a combination of ultrafiltration, activated carbon filtration and UV disinfection. High-quality components, automatic operation with PLC and online monitoring characterize this compact water treatment system. Low maintenance and solar powered

"SolarSpring's MBS-Wall-Mounted is a compact and innovative water treatment system. The system guarantees a reliable and safe water supply from polluted and microbiologically contaminated water sources without the use of chemicals. Technical data: Nominal flow rate: 100 - 600l/h Energy consumption: 8W Weight: 32kg"

"The MBS-Outdoor from SolarSpring is a compact and innovative water treatment plant.The system guarantees a reliable and safe water supply from contaminated and microbiologically contaminated water sources without the use of Chemicals. Tecnical data: Nominal flow rate: 50-200l/h Energy consumption: 40W Weight: 22kg"