Voltage - Import export

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Low cost. Very short. Broad input voltage range. Current output and voltage output. Optional speed measurement. Measurement accuracy: ≤ 0,5% of full scale. Torque ranges from 0,5 to 1000 Nm. Multipurpose use. Contactless transfer of measurement signal. Integrated signal amplifier. Proven strain gage technology. Single power supply.

The new POWER CHARGER units cover various performance stages and charging applications. They can be operated either with a supply voltage of 24 V DC or a line voltage in the range of 85 V – 264 V AC. The output voltage is 75 or 150 watts. A membrane keyboard or an optionally available, integrated touch panel is used to control the generators. POWER CHARGER units can be operated using analog operation or via digital fieldbus interfaces. A control system that uses CANopen and ModbusTCP and other fieldbus standards are available.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. A universal bar with minimal dimensions for supply voltages up to 60 kV. It is used to charge surfaces for blocking and tacking purposes. The charging bar is mainly used where production processes and cycles run faster and with less interference if the materials used (such as films, foils, papers, etc.) adhere to each other. The parallel configuration of two or more bars allows surface-covering charging or operating the unit at high web speeds.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Heavy-duty precision bar for supply voltages up to 60 kV. The charge and field distribution have been substantially improved by the optimized arrangement of the individual bars. Separate current-limited tips prevent an increase in air ionization and high-energy brush discharges.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Target-specific application of the required charge through the adjustable geometry of the charging points. This arrangement is needed, for instance, for tacking small surfaces (labels) using electrostatic power. Suitable for edge zone fixing during film and foil production.

In practice the requirement often arises to convert the measurement signals of a sensor into a standard signal in the simplest possible manner in the immediate proximity of the sensor. This permits trouble-free, low-loss transmission of measured values over longer distances to an instrument board or plant controls. Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application. Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.

This humidity module delivers an output voltage of 0... 10V which is proportional to the relative humidity of 0... 100%RH. The evaluation of the signal is carried out with an ASIC which results in excellent measurement accuracy and stability.

This high-precision calibration source is able to measure currents up to ±50 mA, voltages ±100 V and temperature setpoint values of 12 thermocouple types, including R, S, B, J, T, E, K and N. Voltage drops across the measuring leads can be easily compensated via the sense line. With “thermoelectric voltage simulation” you can enter °C, °F and K, the temperature scales ITS-90 or IPTS-68 and the reference junction type constant/external. Furthermore, when simulating thermocouples a calibrated external reference junction can be used, with the calibration data being taken into account in the device. The device can be operated both via the keypad and via the Ethernet and USB interface. Features: — DC voltage up to ±100.0000 V, ±0.002 % — DC current up to ±50.0000 mA, ±0.005 % - Thermocouple simulation of R, S, B, J, T, E, K, N, M, C, D, G2 - Automatic sequence function (ramp function)

The precision calibration unit combines high accuracy, low drift, low noise and superior long-term stability with multiple functionality and simple operation. Ramps, Δ+/Δ-, and multiple setpoint storage make the operation of the device easier for the user. For that reason the application possibilities are many: — Calibration of current and DC-voltage meters — Precise testing of thermocouple temperature measuring instruments — Calibration of controllers, sensors, detection devices and other devices used in process control — Open-loop process control with the aid of integrated ramp function Features: — High precision current and voltage source ± 52 mA, ± 30 V — Option: ± 22 mA, ± 60 V — Precision simulation for all conventional thermocouple types (optional) — Error limit 0.003 % Rdg. — Standard with RS232 and IEEE488 interface, USB and Ethernet (optional) — Current "SINK"

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 1 On request also available: 1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 2 2500 Nm max. on 1 3/4“ shafts according to ISO 500-3:2014 Type 3 contactless signal transmission built-in measuring amplifier rotation angle measurement (optional) extended EMC strength adjustable output level of rpm and angle signal (5V-24V) Frequency output 10kHz ±5kHz large input voltage range (10-28,8V) strain gauge technology robust design for use in field applications IP67 easy installation accurate results (0.2% accuracy) The torque sensor DRVZ provides a precise measurement of torque and angle of rotation when testing systems that are driven by PTO shafts, such as a tractor gearbox.

Our High-voltage resistors resp. High ohmic resistors are a available as flat and tubular resistors, in various series and as adjustable high-voltage potentiometers.

Twopole and singlepole auxiliary voltage transformers designed to supply control cubicle with low voltage power.

The charging generator CG 202 optimally supplies every charging component of KERSTEN Electrostatik. It delivers a regulated (digital PID control) output voltage of maximum -25kV. The power supply is independant of the world’s varying supply standards by using an input voltage of 24V DC ±10 %. Four charging components can be connected to special high-voltage plug-in connections. Operating parameters are displayed and storable via graphic display and foil-keypad, or can be taken from an industry-standard current interface. Both can be used to operate the system. In addition, an optional discharging generator can be connected to and controlled via the generator.

The high-performance discharge power supply POWER IONIZER impresses with its flexibility. The simple operation, the LED display for visualization of the current values and the integrated function and malfunction monitoring characterize the power supply unit. The POWER IONIZER can be operated with the Eltex AC discharging bars, ion blower nozzles and ion blower pistols. Lowest residual charges can be achieved by different adjustable parameters. Operation is possible as single unit or in a network.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Discharging bar R50/R51A achieves a significantly higher active discharge power than previous discharging technologies. The isolated arrangement of the grounding conductors strengthens the E-field at the active tips, thus contributing to the increased production and speed of load carriers. As a result, significantly more positive ions and free negative electrodes are available than in conventional bars. The bars also feature a high passive discharging power. Resistivity-decoupled tips ensure good discharge and make the bar absolutely short-circuit-proof and protected against contact.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES51 features 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design with protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES53 complies with the requirements of the EX approval BAS98ATEX2179X (discharging bar) and PTB00ATEX2071X (blower head). It is characterized by 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design in protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).