Valve system - Import export

The new generation of our VH series valve terminals. Modern pneumatics with economical energy consumption, compact dimensions and high flow rates. With multipolar electrical connection with D-SUB 25-pin or flat connector as standard. Core items: Reduced dimensions (15mm) Low power consumption (0.85W) High flow rate for size Compact and clear design Metal construction for a long service life even under harsh environmental conditions Fast cycle times thanks to the latest generation of magnetic coils Manual operation easily accessible LED display integrated in the magnetic coil Connection strips with modular system All islands are delivered assembled and tested

This battery system allows the assembly of a series of solenoid valves type VY in 1/8 with various functions. The electrical control is integrated in the housing and equipped with a 25-pin SUB-D connector. The valve terminal can be preconfigured and ordered fully assembled and tested, or, thanks to the very simple, intuitive coding, you can assemble it yourself on the basis.

Manual slide valves as real shut-off valves, which allow the system to be vented when it is switched off. Available in sizes 1/8 to 1/2″. Other colors such as black or red, as well as special versions with spring return or latching are available on request.

For liquids that have to be mixed before processing and then pumped or contain small solids, the new Diaphragm pumps with an integrated air-operated Double diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing tube and a 3-way valve. The pre-assembled system is immediately ready for operation with a few simple steps and is also suitable for explosive liquids. * Mixing and pumping integrated in one system * stufenlose Regelung der Folgeplatte über Steuerventil * Media examples: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased viscosity and solids content Features & Advantages * Quick installation and time saving through easy handling * Compact design * Base plate offers good stability on the container lid * Easy to insert into the 2" bunghole of the container by balancer or overhead crane * No further mixer necessary

Robustness, accuracy, and simplicity are attributes characterizing this ultrasonic welding machine. The entry-level models already include a position measuring system and proportional valve technology as basic equipment. Moreover, password protection and part counter are standard. Precision guiding rails and reliable drive components ensure repeatable welds.

Glasslifter for field assembly at construction side for windows and glass Windows and glass are expensiv and damageable. AERO-LIFT has developed the CLAD-LIFT to handle glass with care and save. Four seperate vacuum circles with four vacuum pumps holds the load save even if one seal of a suction plate ist defectiv. Functionality and features Vacuum lift for glass panes weighing up to 1000 kg, with off-grid power supply. Safety is ensured during the work process by a so-called quadruple circuit system. The redundant valves, suction plates and vacuum tank are used for controlling four separate suction circuits. The four suction circuits are monitored separately by the warning system and thus ensure full load-bearing capacity even in the event of a power outage. The glass lift is able to pick up and put down the panes both vertically and horizontally. Glass panes can be turned unrestricted 360°. Thanks to the battery power supply, the vacuum lift can also be...

Metaltouch valve system with superior durability! Sleeve stopper mechanism gives secure connection. Cupla for higher working pressure up to 44.1MPa {450kgf/cm2}. Mechanism to prevent accidental disconnection maintains tight connection even under vibration or impact when connected. Both socket and plug have metaltouch automatic shutoff valves that prevent fluid spill out on disconnection.

Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in to a plastic housing. The voltage supply occurs over a network cable with an adapter connector. Function: Upon energizing, the control electronics opens the solenoid valve. The sensor can monitor a water film of approximately 0.5 mm and sends a signal to the electronics. The solenoid valve is closed and an audible alarm signal is triggered. This condition will be reset by interrupting the power supply. • Normal widths from DN10 to DN50 • Fittings G1/2 to G2 • Piezo alarm system • LED indicator of operation • Drinking water admittance on enquiry

• Light emitting seals (Flat seal with integrated circuit, LED and transient voltage suppression); • Light emitting sockets (LED, with integrated seal and screw, transient voltage protection); These light-emitting Staiger seals and sockets are above all suited for assuring operational readiness of new and existing installations The light-emitting seals and sockets immediately signalize malfunctions and their precise location. This is particularly advantageous in valve cascades or similar systems with high packing density. Your system’s operational readiness is considerably improved by using the electronic components fitted with LEDs. This is an effective measure to consistently reduce required maintenance costs and time. Owing to their low height and standardized connections, the light-emitting seals and sockets may also be installed in retrofitting.

This cleaning chamber has a special design, because the needed opening mechanism are integrated into the cleaning process. As a rule, it’s not possible to trigger containment by dismantling the double valve halves in front of the wash chamber. Thus this step must take place within the enclosed chamber. Servolift has developed a cleaning chamber for this which meets these special requirements. The needed opening mechanisms for the double valve system are found within the wash chamber. Cleaning media and drying air are fed from the underside through the opened double valve of the interior of the container. Also this chamber can be produced, like the cleaning chamber, in various designs. Efficient cleaning of high containment systems Technical description Compact and user-friendly construction Chamber with 1 or 2 doors design Process unit under or alternatively next to the wash chamber in the equipment room Automatic opening unit for passive valves in the area of the sink and/or in...

The number of HPAPI (High Potency Active Pharmaceutical Ingredient) has been continuously increasing over the past view years. At the same time, the manufacturing industry wants more flexibility in production to respond faster and more accurately to needs and changing demand. The complete IBC cleaning and drying solution for substances with high hazard classification up to OEB 5 for pharmaceutical industries is at the end of all process steps in pharmaceutical solids production and meets this requirement including full validation. Validated interior cleaning adapted to space and product Technical description suitable for high containment containment Valve system with Split Butterfly Valves single-stage washing principle, no water circulation to avoid cross-contamination hydrokinetic head for cleaning (container) inner surfaces hydrokinetic head for cleaning bottom valves recipe controlled system with automatic controls, sampling, batch reporting and security access drying with...

A system is only complete when they also fulfill product transfer to interfaces. Thus the specified OEB level is supplied from SERVOLIFT with valves, split valve systems, feed systems, funnels, discharging aids, filling and discharge tubes, etc., corresponding to the containers and handling equipment. The solutions meet the requirements of cGMP and the FDA. Whether protecting the products against their environment, or protecting employees from the product, SERVOLIFT always has the solution, with over 40 years’ experience in the field. Low-dust or dust-free Technical description DECELERATOR: Product transfer from one process to another are often vertical in the pharmaceutical and chemical industry. The feed must then be carried out for the most part over a given vertical distance.
 Controlled product flow using regulated compressed air transfers the product without segregation at the adapted fall speed in vertical product transfer systems. Segregation-free, controlled product...

Powder handling OEB Level 3+4 At last a stable and robust split butterfly valve system for emptying and filling your highly potent or toxic media. Light to handle and safe to use. You can rely on the Müller Containment Valve to safeguard the health of your employees even as you maintain the purity of your product and protect the environment. The Müller Containment Split Butterfly Valve MCV is in two halves: the active and passive disks. The active disk incorporates the mechanical system for locking both halves together and a manual lever or actuator for opening and closing the valve. The active half of the valve is fitted to the vessel filling or emptying nozzle, and the passive half to the intermediate bulk container. The two halves of the butterfly valve (active and passive disks) must be docked together in order to open the valve. The ruggedly constructed and GMP-compliant locking device ensures accurate location and the safe docking when the two halves are connected. When...