The works - Import export

Optigrun Drainage Material Perl 2-10 LA is used as a drainage layer beneath intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath paving.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Optigrun Drainage Material Perl 8-16 LA is used as a drainage layer beneath intensive green roofs without water accumulation and as pressure resistant drainage and equalization layer beneath paving.

Optigrun Drainage Material Perl 2/10 BT is used as an especially lightweight drainage layer beneath extensive and intensive green roofs and for pressure resistant filling of Drainage Boards on roof structures with low load reserves.

Optigrun Drainage Material 8-16 BS is used as drainage layer beneath extensive and intensive green roofs, for pressure resistant filling of Drainage Boards and as lightweight drainage and equalization layer beneath paving.

Optigrun Drainage Material Perl 2-10 BS is used as a drainage layer beneath extensive and intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath pathways.

Single-acting pneumatic cylinder diameter 20 as a spare part for the no longer produced Wabco Westinghouse series 421 427.

Graduated beakers made of PP are virtually indestructible and highly transparent. Graduated beakers are perfectly suited as advertising means for chemical products. The smooth surface enables print of a logo or an advertising slogan.

Laboratory beakers based on DIN EN ISO 3819 (glass, formerly DIN 12331), versatile. When bought in bulk, individual print is possible.

Laboratory bucket for transporting, decanting and mixing. Safe emptying with wide spout. Handle made of metal.

Measuring cylinder, tall shape, according to DIN 12681 (Glass)/ISO 6706, with hexagonal base. For use in laboratories, chemists, in workshops, during outdoor field work and wherever volumetric measurements have to be made during production.

Universal graduated beakers with indestructible graduation. The three specially formed spouts enable easy pouring of liquids. Due to great pricing, they can also be used as disposable graduated beakers.

Our metalworking shop allows us to realize customized housings according to customer requests. A team of experienced employees assures the necessary precision including all required cutouts and drillings of housings. Our own tool shop is equipped with machines for lathing, milling, electrical discharge machining and grinding which allow us to quickly manufacture customized parts/adjustments in-house.

Type: 3, IEC/EN 61496; SIL: 2, IEC 61508; Performance Level (PL): d, EN ISO 13849-1; Scanning angle: 270 °; Number of field pairs, reversible: 1; Number of protective functions: 1 Piece(s); Operating range: 0 ... 3 m; Range, warning field: 0 ... 20 m; Supply voltage: 24 V, DC, -15 ... 15 %; Safety-related switching outputs (OSSDs): 2 Piece(s), Transistor, PNP; Dimension: 140 mm x 149 mm x 140 mm

The C 52 is intended for the simultaneous 5-axis machining of workpieces weighing up to 2000 kg - with unbeatable accuracy and precision. Parameters that always represent a challenge for the machine dynamics. HERMLE has overcome these challenges by developing and designing a precise and high-performance machining centre. The C 52 is the successor of the extremely successful C 50. The C 52 machining centre: A flexible all-rounder with a large working area and minimum footprint. The tool magazine of the C 52 is also integrated and can be extended to 325 pockets using an additional magazine. The C 52 sets new standards: These standards are particularly valued in demanding applications, for instance in the medical, aerospace and automotive industries. In short: wherever the highest precision and maximum efficiency are required. Milling and turning in one clamping - the MT series with the model C 52 U MT dynamic.

The multifunctional working-platform Multip by PASCHAL has proven to be one of the most efficient and most highly-safeguarded systems for work platforms on formwork. If you combine the PASCHAL formwork systems with Multip, this complete system comprising both formwork and scaffolding provides even better forming times, combined with the necessary working safety.

Packing and working table electrically height-adjustable Overhead unit light at the packing station With electric lifting axle for easy change of the roll at the overhead unit Mouse and keyboard tray Small rear wall board cardboard magazine Swiveling TFT arm signal lamp Holder for waste bin and tape dispenser AirWave2 Air Cushion Machine

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings..... Idle running proof structure adopted. No blowing without touching the work piece by the chisel. Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. Easy to handle, compact lightweight type and weight only one kilogram

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH16 has many feature on the followings..... Idle running proof structure adopted. No blowing 　　 　 without touching the work piece by the chisel. Vibration on operation is reduced by low vibration 　 　 structure. Especially effective on continuous 　 　 　 　 operation. Easy to handle, compact 　 lightweight type and weight 　 only one kilogram.

The A300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high material and are subjected to high precision process.

The active Eltex grounding clamps from the TERRACLAMP and the 70 series are used together with the TERRALIGHT and the Terra-Control TUE30 ground monitoring system to establish and monitor grounding connections. These devices are used when decanting or filling potentially explosive substances. Existing electrostatic changes are discharged effectively in a controlled manner. The active grounding clamps from the TERRA-C/S, TERRA-C/B, 70AG, 70BG, 70CG (only for TCB040), 70AK and 70HK series feature extremely hard and sharp collet jaws. The jaws also feature a continuously high clamping force, ensuring a secure connection to the equipotential bonding at all times. The standard version of the grounding clamps includes a plug-in-connector for an easy connection to the included grounding cable, spiral cable and rewinding cable reels.

Electromagnetic clutches and brakes by Kendrion (Aerzen) transmit the torque and brake torque through dry running friction material. With DC voltage applied, the torque is transmitted without backlash. Using the prestressed spring of the armature, a release, free of residual torque is ensured. These clutches and brakes can be installed in any mounting position and hardly need any maintenance. Kendrion (Aerzen) offers standard clutches from 0.3 to 3.6 Nm as well as customer- and application-specific solutions up to 5 Nm.

The Active Brake Line includes DC single-disc brakes, in which the action of force of an electromagnetic field (electromagnetically closing) is used to generate the braking force. The Active Brake Line is characterized by a secure, residual moment-free lifting in any position, and by a backlash-free transfer of the braking torque. Throughout their complete service life, they require little or no maintenance.

Our quality beddings require an important degree of manual work and attention to detail.