Tank containers - Import export

MADE FROM VERINOX STAINLESS STEEL OR GALVANISED STEEL WITH VOLUMES RANGING FROM 40 M3 TO 10,000 M3 Both industry and communities require professional solutions for plant and tank construction and for the storage and treatment of liquids, as well as flexibility in terms of size, choice of material and equipment. When constructing liquid storage tanks, the selection of the best material is an important quality factor. Municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries set high requirements regarding the tank material, for example. LIPP offers a variety of materials, ranging from galvanised steel through the combination material Verinox to high alloy stainless steels. APPLICATIONS Waste water tanks Sewage sludge tanks Process water tanks Storage tanks Firefighting water tanks Mixing and compensation tanks Buffer Tanks Stackable sludge tanks Storage containers

Stainless steel is expensive. Verinox offers the same level of quality as the conventional material used for the construction of tanks and containers while using less stainless steel. With Verinox – the duplex material developed by Lipp – a sheet of stainless steel is joined to a sheet of galvanised steel by means of a separation layer. Three components form the basis for this material that is ideal for tank and container construction not only does it have outstanding physical properties but it also uses a reduced quantity of expensive stainless steel, resulting in lower costs. With this invention, Lipp has successfully retained the economic benefit of the LIPP Double Seam System while improving the material savings made. VERINOX ENABLES STAINLESS STEEL TO BE USED INSIDE TANKS – ESPECIALLY WITH MEDIA THAT REQUIRE SUFFICIENT RESISTANCE No open joints due to the folded design Doubly lined in stainless steel with a smooth continuous finish

The fluoropolymer coating for special tank systems and containers. Modern tank and environmental technology requires safety and cost effectiveness. Gutbrod stands for innovative ideas and a dedication to service in coating with fluoropolymers and other technical, high-performance materials. Using products with the name, a chemical and acid resistant inner coating that is sustainable and cost-effective can be applied to special tank systems and containers through an access port. The material for this Fluorpolymer-coating, which will be applied with a specific method, is highly resistant against chemicals and acids, and has extraordinarily advantages, compared with common coating and lining systems.

SYSTEM FOR THE COST EFFECTIVE REFURBISHING OR VOLUME EXPANSION OF CONTAINERS OR TANKS Changing conditions, material wear, a change to the filling medium – these are just a few of the factors that lead to the replacement of containers used in industry or at municipal sewage treatment plants. Quantities change and existing containers become too small – these are also problems that frequently arise. In such cases, the mobile machine technology from Lipp using the LIPP Double Seam System or the LIPP welding technique offers a solution that is as simple as it is cost effective, while being extraordinarily stable. Containers can be installed on site in any size required and can be placed in an existing steel or reinforced concrete basin using a mobile crane. The existing container volume is utilised, eliminating the need for expensive demolition work. Utilisation of the existing container volume High stability, leak tightness and safety Continuous adaptation to existing container

ON SITE PRODUCTION FLEXIBILITY WITH CONTINUOUSLY VARIABLE DIMENSIONS Special circumstances and requirements often call for containers which cannot be produced using standard solutions. This is where special tanks and silos which can be adjusted to suit prevailing conditions and provide individual solutions are required. The LIPP System offers a variety of possible solutions to a wide range of problems in the form of welded or folded designs. Steplessly adjustable diameters and heights enable tank dimensions to be individually adapted to the prevailing conditions. In addition, on site installation only requires a minimal amount of space, for example enabling containers to be constructed in buildings or other situations where there is limited space available. Tank in tank solutions can also be realised using the LIPP System. Tank in tank solutions Container expansion, e.g. of concrete containers Installation inside buildings Mounting on platforms Mounting on various substructures

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection

The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - For containers with floor drain - Provides highest flexibility in installation and mobility - Can also be used at low ceiling heights - Stainless steel version for use in hazardous areas - Can also be integrated into pipe systems - A horizontal centrifugal pump that can be used with different FLUX motors

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. * Horizontal connection at the bottom run of the container * Pump tube equipped with Lutz original hand wheel * Suitable for emptying alternative fuels, oils, flammable liquids * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Explosion-proof versions for applications in hazardous areas (Zone 1 and 2) * Easy to dismantle * Low space requirement

The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motorsareavailable , which can be combined with the Pump tubeat any time. This gives you flexibility at all times, thus saving important resources. * Horizontal connection on the bottom run of the container * Pump tube equipped with Lutz original hand wheel * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Food grade connections * Low space requirement * Approved according to FDA and regulation (EG) 1935/2004

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter. Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

These blenders are especially well-suited to the area of pilot facilities, small batches, production as well as test. Its flexibility results from the various designs, such as mobile or stationary, as well as the use of exchangeable blending containers, such as containers, round tanks, double cones and V-containers. It can be expanded through installations and conversions of choppers, spray systems and NIR systems. More than just blending Technical description Load capacity: 150 kg Protective hood, Macrolon plate in an enclosed stainless steel frame Non product contact material AISI 316L / AISI 304, Ra < 1.4 μm Product contact material AISI 316L, Ra < 0.8 μm Blender individually exchangeable: Container, drum, double cone, special containers Further optional functions: Spraying system, NIR, active tools Blending drive: frequency-controlled worm drive brake motor, blending RPM: 5-20, adjustable Blending time 0-99 min., adjustable Control: PLC, Siemens S7 operation, touch...